1990 Suzuki Swift Body Parts
More 1990 Suzuki Swift Body Parts Categories
If you’re looking for an original Body Parts replacement for a 1990 Suzuki Swift, you can search through our selection below. You’ll also find aftermarket and OEM Body Parts to meet your needs.
Essential 1990 Suzuki Swift Body Parts
StrongArm – Liftgate Lift Support: 28.27" Ext Length, 11.37" Travel, 55 Lbs of Force, 1 Pk (Part No.B4987R)
from
$28.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Liftgate Lift Support: 24.17" Ext Length, 9.5" Travel, 47 Lbs of Force, 1 Pk (Part No.C4827)
from
$30.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Atlas Lift – Lift Support (Part No.LS10543)
from
$25.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Atlas Lift – Lift Support (Part No.LS11157)
from
$25.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Atlas Lift – Lift Support (Part No.LS10296)
from
$30.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Atlas Lift – Lift Support (Part No.LS10297)
from
$30.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
StrongArm – Liftgate Lift Support: 28.27" Ext Length, 11.37" Travel, 55 Lbs of Force, 1 Pk (Part No.B4987L)
from
$28.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Liftgate Lift Support: 24.17" Ext Length, 9.5" Travel, 47 Lbs of Force, 1 Pk (Part No.C4826)
from
$29.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
K-Source – Replacement Glass (Part No.99111)
from
$10.99
Replacement Glass for 89-94 Swift HB & Sedan GA, GL
Product Features:
See More
Product Features:
- The glass measures 4 1/4″ inches tall by 6 1/2″ inches wide and 6 7/8″ inches diagonally.
- Glass fits mirrors with power functions only.
- Step-by-step instructions for easy installation
- Mounting tape included for low-hassle stick-on installation
- Most economical way to replace cracked mirror glass versus the entire mirror housing
- Flat
Burco – Door Mirror Replacement Glass (Part No.4181)
from
$24.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
K-Source – Replacement Glass (Part No.90111)
from
$11.99
Replacement Glass for 89-94Swift HB & Sedan GA, GL
Product Features:
See More
Product Features:
- The glass measures 4 1/4″ inches tall by 6 1/2″ inches wide and 6 7/8″ inches diagonally.
- Glass fits mirrors with power functions only.
- Step-by-step instructions for easy installation
- Mounting tape included for low-hassle stick-on installation
- Most economical way to replace cracked mirror glass versus the entire mirror housing
- Convex
K-Source – 95-01, CHEVROLET Metro , 95-01, Driver, Manual (Part No.62656G)
from
$72.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
- Mirror glass to be adjusted by hand
- This Mirror does not fold
- Black
- Superior material and manufacturing process ensures the highest quality possible
Burco – Door Mirror Replacement Glass (Part No.3063)
from
$29.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Door Mirror Replacement Glass (Part No.3661)
from
$29.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Door Mirror Replacement Glass (Part No.5277)
from
$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
KAI – Mirror Assembly: Passenger Side, Manual Adjustment, 1 Pk (Part No.SZ1321108)
from
$49.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Manual Door Mirror, Black. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.
Product Features:
See More
Product Features:
- Black, Convex Glass
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
K-Source – 95-01, CHEVROLET Metro , 95-01, Pass, Manual (Part No.62655G)
from
$72.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
- Mirror glass to be adjusted by hand
- This Mirror does not fold
- Black
- Superior material and manufacturing process ensures the highest quality possible
Burco – Door Mirror Replacement Glass (Part No.2874)
from
$24.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Popular 1990 Suzuki Swift Body Parts Categories
1990 Suzuki Swift Body Parts
You count on your 1990 Suzuki Swift to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 9 Body Parts ranging in price from $10.99 to $34.99, you’re sure to find everything you need for your 1990 Suzuki Swift.
Brands matter. If you want to shop a specific Body Parts brand, we stock 4 different brands like StrongArm, Atlas Lift, and Burco. 1990 Suzuki Swift Body Parts start as low as $10.99!
One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 5 extensive product reviews on 1990 Suzuki Swift Body Parts.
Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1990 Suzuki Swift below to get started!
Top-Rated Body Parts Brands For Your 1990 Suzuki Swift
Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1990 Suzuki Swift running right for years to come. In our inventory you’ll find brands like StrongArm, Atlas Lift, Burco, and even more.
Popular StrongArm Body Parts
You’ll find popular StrongArm brand products across Vehicle Hoods. All are waiting to get your 1990 Suzuki Swift back on the road. Some of the top-rated StrongArm products in these categories are:
from
$29.99
(1)
Liftgate Lift Support: 24.17" Ext Length, 9.5" Travel, 47 Lbs of Force, 1 Pk
Lift Supports
FAQs for 1990 Suzuki Swift Body Parts
What are the most purchased Body Parts for the 1990 Suzuki Swift?
Out of 9 Body Parts for the 1990 Suzuki Swift, the most popular in our inventory are:
from
$30.99
This product is not rated
Liftgate Lift Support: 24.17" Ext Length, 9.5" Travel, 47 Lbs of Force, 1 Pk
Lift Supports
