1990 Saab 9000 Brake Parts

Below you will find various in-demand Saab Brake Parts, components and accessories for your 1990 9000. Advance Auto Parts has popular 9000 parts like Brake Pads and Shoes, Brake Kits, Brake Calipers and more. You’ll also find aftermarket and OEM Brake Parts for other 9000 model years including 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998 and more. Select a category of 1990 Saab 9000 Brake Parts below and start saving instantly.

Popular 1990 Saab 9000 Brake Parts Categories

Front Brake Rotors

Rear Brake Rotors

Rear Brake Pads and Shoes

Front Brake Pads and Shoes

Disc Brake Pad and Rotor Kits

Disc Brake Kits

Brake Caliper Bolt and Pins

Brake Caliper Guide Pin Boot Kits

Brake Pad Retaining Clips

Brake Master Cylinder Nut

Essential Brake Parts for 1990 Saab 9000s

from

$13.16

FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:

Guaranteed factory fit to original equipment specifications
Meets or exceeds original equipment factory safety standards

from

$6.99

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$41.47

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

High metallurgical and machining standard to improve stopping distances
Produced to match OE design fitment – G 3000 gray iron
Mill balanced
TS16949 certified
Non-directional finish provides smooth vibration free performance
No need for machining prior to installation
Durable Metallurgic-Gray finish to all outward non-friction surfaces
Metallurgic-Gray anti-rust protection to help maintain a clean appearance
Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
Designed to minimize brake fade and extend pad and rotor life
24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

from

$69.14

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

Coat-Z protective anti-corrosion coating
No formation of rust at the hub and herewith improved visual appearance
Immediate functional capability without removal of the coating before mounting
Excellent deceleration action and no distortion of friction ring at high temperatures
Substantial weight saving and therefore less unsprung mass
Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
Hot spots prevented by optimized design of ventilation channels
1:1 exchange of original disc possible
Not subject to registration: general ABE certification supplied with disc
No conversion required for brake tuning

from

$7.49

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Helps deliver a quieter, more efficient braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels

from

$25.49

This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles.
Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$42.99

The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium hardware for easy installation

from

$31.99

The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

from

$24.66

Parking Brake Cable

from

$25.61

PARKING BRAKE CABLE

from

$13.69

This wheel disc hardware kit includes rubber components used to protect the caliper pins or bolts. Worn or cracked rubber components will allow excessive movement of guide pins or bolts.

from

$15.29

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Prevents noise and premature wear
Provides longer brake life and performance

from

$81.50

Coat-Z protective anti-corrosion coating
No formation of rust at the hub and herewith improved visual appearance
Immediate functional capability without removal of the coating before mounting
Excellent deceleration action and no distortion of friction ring at high temperatures
Substantial weight saving and therefore less unsprung mass
Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
Hot spots prevented by optimized design of ventilation channels
1:1 exchange of original disc possible
Not subject to registration: general ABE certification supplied with disc
No conversion required for brake tuning

from

$61.99

Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:

Application-specific friction formulations provide shorter stopping distances and extended pad life
Hardware included for most applications
OE-designed slots and chamfers to reduce noise and vibration
Multi-layer shim provides near silent braking
Powder-coated backing plate prevents corrosion

from

$32.49

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$8.41

The Professional Parts Sweden Anti Rattle Spring and Clip Set is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$8.87

New Brake Hardware – Back to like-new performance The WBR complete disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal like new operating condition. Disc hardware can lose 50% of spring tension within 1-2 years, which can cause pads to stick, create uneven pad wear, and lead to unwanted brake noise.

Product Features:

Reduced Brake Noise, comebacks and unsatisfied customers,
Extends the life of a brake job,
Improved fuel mileage, and
Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
reduce effective braking force
cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
cause excessive caliper movement
cause unwanted noise like rattles and thumps.

from

$12.49

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

This part matches Original Equipment (OE) quality specifications
Exact fitment and original replacement
Helps deliver a quieter, more efficient braking system
Low-friction PTFE coating to reduce drag
Manufactured with quality materials to suppress high stress levels

from

$216.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. This PowerStop Z26 Street Warrior Brake Upgrade Kit is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.

Product Features:

This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
Stainless-steel pad shims resist the increased temperatures common on high performance applications
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Drilled & Slotted performance rotors provide maximum cooling
Bolt-on upgrade for stock brakes, no modifications necessary
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
Rotors are zinc plated for maximum protection against rust.
Buy with confidence from the originator & industry leader of brake kits
Buy with confidence from the originator & industry leader of brake kits

from

$190.99

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Multi-Layer rubberized shims provide virtually noise-free braking
Drilled & Slotted performance rotors provide maximum cooling
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Bolt-on upgrade for stock brakes, no modifications necessary
Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Rotors are zinc plated for maximum protection against rust.
Buy with confidence from the originator & industry leader of brake kits
Buy with confidence from the originator & industry leader of brake kits

from

$2.02

Exhaust Nut

Upgrade your 1990 Saab 9000 with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1990 Saab 9000, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Saab or enhancing its overall performance, Brake Parts are key to keeping your 9000 functioning at its best. At Advance Auto Parts, we offer a wide selection of 27 Brake Parts for the 1990 Saab 9000, designed to meet your needs without breaking the bank. From Brake Pads and Shoe replacements to Brake Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1990 Saab 9000 at great prices. Our Brake Parts inventory for this model ranges from just $2.02 to $216.99, with an average price of $40.08. Our 27 Brake Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 1990 Saab 9000 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Saab 9000, we stock popular OEM and aftermarket Brake Parts from top names like Carquest, Dorman, Carquest Premium, and more. Carquest Brake Parts start at just $4.29 and boast an impressive 4 stars average rating from customers. Dorman and Carquest Premium also bring quality to the table, with Brake Parts available starting at $25.49, and at an average 4 stars rating. With 336 customer reviews and counting, our 1990 Saab 9000 Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Saab 9000 is always ready to roll. We’re committed to providing you with everything you need to keep your 9000 in top shape, all in one place. Start shopping confidently below for your 1990 Saab 9000!

Best-Selling Brake Pads and Shoes for 1990 Saab 9000s

Enhance the driving experience in your Saab with 9 quality Brake Pads and Shoe components, starting at $6.68.

show more show less

from

$61.99

Application-specific friction formulations provide shorter stopping distances and extended pad life
Hardware included for most applications
OE-designed slots and chamfers to reduce noise and vibration
Multi-layer shim provides near silent braking
Powder-coated backing plate prevents corrosion

from

$22.99

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$32.49

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$45.69

Brake Pad Set

from

$45.02

Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.

Product Features:

Original Equipment Performance
Solid Pedal Feel With Smooth Braking Performance
Ultra-Quiet Ceramic Formulation
Low Dust – Long Life
Advanced Material Platform Specific Shims
Scorched for Easy Break In
Positive Mold Construction
All WBR Pads are 100% Shimmed

from

$37.99

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium hardware for easy installation

from

$31.99

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

from

$8.41

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$6.68

Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

Most Popular 1990 Saab 9000 Brake Kits

Customize your Saab with 7 Brake Kits products like Brake Hardware Kits, Brake Caliper Guide Pin Boot Kits, and Disc Brake Kits, all priced under $216.99.

show more show less

from

$15.29

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Prevents noise and premature wear
Provides longer brake life and performance

from

$6.99

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$4.29

This part matches Original Equipment (OE) quality specifications
Exact fitment and original replacement
New Brake Hardware prevents premature wear and maximizes performance
Helps deliver a quieter, more efficient braking system
Manufactured with quality materials to suppress high stress levels

from

$190.99

This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Multi-Layer rubberized shims provide virtually noise-free braking
Drilled & Slotted performance rotors provide maximum cooling
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Bolt-on upgrade for stock brakes, no modifications necessary
Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Rotors are zinc plated for maximum protection against rust.
Buy with confidence from the originator & industry leader of brake kits
Buy with confidence from the originator & industry leader of brake kits

from

$216.99

This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
Stainless-steel pad shims resist the increased temperatures common on high performance applications
Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
Drilled & Slotted performance rotors provide maximum cooling
Bolt-on upgrade for stock brakes, no modifications necessary
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
Rotors are zinc plated for maximum protection against rust.
Buy with confidence from the originator & industry leader of brake kits
Buy with confidence from the originator & industry leader of brake kits

from

$13.69

This wheel disc hardware kit includes rubber components used to protect the caliper pins or bolts. Worn or cracked rubber components will allow excessive movement of guide pins or bolts.

from

$13.16

Guaranteed factory fit to original equipment specifications
Meets or exceeds original equipment factory safety standards

Top Picks for 1990 Saab 9000 Brake Calipers

Upgrade Saab 9000s with top-quality Brake Calipers parts, including 4 OEM and aftermarket selections for your 1990 model.

show more show less

from

$7.49

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Helps deliver a quieter, more efficient braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels

from

$25.49

Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles.
Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.95

Caliper Guide Pin

from

$10.68

The ATE Caliper Guide Pin is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

In-Demand Brake Master Cylinders for 1990 Saab 9000s

Select from 1 premium Brake Master Cylinders parts for your 1990 Saab 9000.

show more show less

from

$2.02

Exhaust Nut

Most Sold 1990 Saab 9000 Brake Rotors and Drums

Explore our best-selling Saab parts for the 1990 9000 among 3 OEM and aftermarket options starting from $41.47.

show more show less

from

$81.50

Coat-Z protective anti-corrosion coating
No formation of rust at the hub and herewith improved visual appearance
Immediate functional capability without removal of the coating before mounting
Excellent deceleration action and no distortion of friction ring at high temperatures
Substantial weight saving and therefore less unsprung mass
Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
Hot spots prevented by optimized design of ventilation channels
1:1 exchange of original disc possible
Not subject to registration: general ABE certification supplied with disc
No conversion required for brake tuning

from

$69.14

Coat-Z protective anti-corrosion coating
No formation of rust at the hub and herewith improved visual appearance
Immediate functional capability without removal of the coating before mounting
Excellent deceleration action and no distortion of friction ring at high temperatures
Substantial weight saving and therefore less unsprung mass
Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
Hot spots prevented by optimized design of ventilation channels
1:1 exchange of original disc possible
Not subject to registration: general ABE certification supplied with disc
No conversion required for brake tuning

from

$41.47

High metallurgical and machining standard to improve stopping distances
Produced to match OE design fitment – G 3000 gray iron
Mill balanced
TS16949 certified
Non-directional finish provides smooth vibration free performance
No need for machining prior to installation
Durable Metallurgic-Gray finish to all outward non-friction surfaces
Metallurgic-Gray anti-rust protection to help maintain a clean appearance
Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
Designed to minimize brake fade and extend pad and rotor life
24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

Top-Rated Brake Parts Brands For Your 1990 Saab 9000

Shop for the best-rated brands offering Brake Parts and other products for your 1990 Saab 9000s. Below you’ll find some of our best rated Brake Parts from Carquest, Dorman, and Carquest Premium, and more. Brake Parts from these brands that fit a 1990 9000 start at just $4.29 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 1990 Saab 9000 Brake Parts

When it comes to maintaining or upgrading your 1990 Saab 9000, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Brake Parts, specifically designed for the 1990 Saab 9000. With over 6 Carquest brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.29, with an average price of just $14.92. Plus, with over 41 customer reviews and an average rating of 4 stars, you can trust that our Carquest Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$15.29

(2)

Disc Brake Caliper Guide Pin Boot Kit

“These are overpriced but they are good quality epdm material. They fit tightly as they should. Interestingly most remanned calipers for the 2014 Focus”

from
$4.29

This product is not rated

Disc Brake Hardware Kit

“”

from
$32.49

This product is not rated

Brake Pads: Reliable and Dependable Stopping

“”

Popular Dorman 1990 Saab 9000 Brake Parts

Dorman auto parts is one of the highest quality Brake Part brands in the market. Any 1990 Saab 9000 owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1990 9000, Advance Auto Parts carries a full inventory of 1 Dorman Brake Parts. Plus you will be keeping your Saab in peak condition while saving money because prices on these Dorman Brake Parts range up to $25.49, plus, with more than 40 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.

from
$25.49

(40)

Oversized Brake Caliper Bolt

“Had my caliper bolt strip on my mk4 Jetta. This oversized caliper bolt not only saved me from having to buy a knuckle, but made the repair painless an”

FAQs for 1990 Saab 9000 Brake Parts

Which Brake Parts are best-sellers for 1990 Saab 9000s?

Out of 27 Brake Parts that fit 1990 Saab 9000s, the following parts are the top sellers:

Oversized Brake Caliper Bolt (17190238) – $25.49
Exhaust Nut (12087353) – $2.02
Disc Brake Hardware Kit (10168315) – $4.29

What’s the price range for 1990 Saab 9000 Brake Parts?

Brake Part prices for the 1990 Saab 9000 start at $2.02 and go up to $216.99 for the most premium parts.

What’s the average price of a Brake Part for a 1990 Saab 9000?

The average price for Brake Parts for the 1990 Saab 9000 is $40.08. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Saab 9000 model years?

Yes, we currently carry Brake Parts for 12 model years of Saab 9000s between 1986 and 1998. Brake Parts are bought most frequently for the following model years: 1998, 1997, 1996, 1995, 1994, 1993, 1992, 1991, and 1989.

What are the cheapest Brake Parts for my 1990 Saab 9000?

The cheapest 1990 Saab 9000 Brake Parts we carry in stock are:

Exhaust Nut (12087353) – $2.02
Disc Brake Hardware Kit (10168315) – $4.29
Anti Rattle Spring / (11973107) – $6.68
Disc Brake Caliper Repair Kit (10279135) – $6.99
Disc Brake Caliper Guide Pin Kit (10168234) – $7.49

What are the top-rated Brake Parts that fit the 1990 Saab 9000?

Out of 336 reviews by customers, our 1990 Saab 9000 Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1990 Saab 9000 and their top-rated products:

Brake Pads and Shoes
- Brake Pads: With Hardware, Semi-metallic, Long Life and Quiet (22973520) – $61.99
- Brake Pads: Reliable and Dependable Stopping (5758696) – $22.99

What types of Brake Parts do you sell for my 1990 Saab 9000?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1990 Saab 9000:

Can I get help with 1990 Saab 9000 Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Saab Brake Parts and more.

What is your return policy for Saab 9000 Brake Parts?

Advance Auto Parts keeps returns simple. For new Saab 9000 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1990 Saab 9000 Brake Parts

FTE – Brake Caliper Repair Kit (Part No.N105084004FTE)

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.15220)

WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N100024130WBC)

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100024130ZIC)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5025)

Dorman – Help – Oversized Brake Caliper Bolt (Part No.13894)

Carquest Premium – Multi Purpose Relay (Part No.RAA1247)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-493)

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-279)

Professional Parts Sweden – Parking Brake Cable (Part No.N50101458421PPS)

Vaico – PARKING BRAKE CABLE (Part No.N501022330VCO)

Wagner – Disc Brake Hardware Pin Boot Kit (Part No.H8200)

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100024127ZIC)

Carquest Premium Gold – Brake Pads: With Hardware, Semi-metallic, Long Life and Quiet (Part No.GMKD618)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD403)

Professional Parts Sweden – Anti Rattle Spring and Clip Set (Part No.N1068226236PPS)

WBR – Disc Brake Hardware Pro-Kit (Part No.N1061460561WBR)

Carquest Wearever – Disc Brake Hardware Kit (Part No.15720A)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z26 Street Performance (Part No.K367-26)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K367)

Febi – Exhaust Nut (Part No.H100111133FEB)

Carquest Premium Gold – Brake Pads: With Hardware, Semi-metallic, Long Life and Quiet (Part No.GMKD618)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD322)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD403)

Autopart International Inc – Brake Pad Set (Part No.N10102964984API)

World Brake Resources – Ceramic Brake Pads (Part No.N1010415513WBR)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-279)

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-279)

Professional Parts Sweden – Anti Rattle Spring and Clip Set (Part No.N1068226236PPS)

ATE – Anti Rattle Spring / (Part No.N1068226236ATE)

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.15220)

Carquest Wearever – Disc Brake Hardware Kit (Part No.13119)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K367)

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z26 Street Performance (Part No.K367-26)

Wagner – Disc Brake Hardware Pin Boot Kit (Part No.H8200)

FTE – Brake Caliper Repair Kit (Part No.N105084004FTE)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5025)

Dorman – Help – Oversized Brake Caliper Bolt (Part No.13894)

Autopart International Inc – Caliper Guide Pin (Part No.N10451913325API)

ATE – ATE Caliper Guide Pin (Part No.N1045310493ATE)

Febi – Exhaust Nut (Part No.H100111133FEB)

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100024127ZIC)

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100024130ZIC)

WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N100024130WBC)