1990 Porsche 944 Brake Parts

Essential Brake Parts for 1990 Porsche 944s

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD252)

Brake Pads: Reliable and Dependable Stopping

from

$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
See More

Otto Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N100023649ZXC)

Coat-Z Sport Brake Disc (Rotor)

from

$212.77
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • Better wet braking performance by permanent expulsion of brake dust and water
  • Sporty look
  • Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
  • Noticeable improvement in the braking power of your car
  • Prevention of brake fade
  • Countersinking of holes doubles up as wear indicator
  • 1:1 exchange of original disc possible
  • No additional adaption necessary
  • Not subject to registration: general ABE certification supplied with disc
See More

Zimmermann Coated – Brake Disc (Part No.N10001863165ZXC)

Brake Disc

from

$255.77
Brake Disc

Bosch – QuietCast Premium Brake Disc (Rotor) (Part No.N100020721BOS)

QuietCast Premium Brake Disc (Rotor)

from

$94.94
Bosch rotors utilize innovative materials that ensure the very highest quality – and prevent brake judder, noise, vibration and harshness. Bosch QuietCast Premium Disc Brake Rotors utilize vehicle specific castings. The heat flow casting process produces superior G3000, GG20, GG15 and HC (high carbon) casting. Bosch castings provide strength and durability not found in competitive product. While competitors may provide a low cost product which helps save money, their castings can crack and provide poor durability. Bosch QuietCast provides consistent, safe and long lasting performance. Alutherm 80 Coating – Bi-metal aluminum and zinc clean-look coating/Alutherm 80 extends the life of the rotor and provides a clean look for today’s open wheels

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Prevent rust and corrosion with clear-look coating protection
  • Provide a clean look for today’s open-wheeled vehicles
  • Are 100% balanced for smooth operation
  • Factory-engraved edge code and minimum thickness specifications Bosch QuietCast Brake Rotors Brochure
See More

ATE – Pneumatic Brake Booster (Part No.N400030336ATE)

Pneumatic Brake Booster

from

$383.44
ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.

Product Features:
  • Original equipment (OE) quality
  • Wide range of single and tandem Brake Boosters
  • Unique tie-rod design meaning lighter and thinner parts for more efficient performance
  • Most units are made of steel, but lightweight aluminium versions are also available.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5713)

Vacuum Brake Booster: Without Master Cylinder

from

$136.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Original Equipment – Original Equipment Brake Pad Shim (Part No.N102029038OEA)

Original Equipment Brake Pad Shim

from

$11.06
The Original Equipment Brake Pad Shim is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part. Original Equipment Brake Pad Shims are platform specific rubber to metal composite material designed to solve noise and vibration problems. OE brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.

Product Features:
  • Platform Specific Design
  • Combats Brake Squeal
  • OE-Style Composite Core Shim
  • Effective Thermal Barrier
See More

APA/URO Parts – APA/URO Brake Pad Shim (Part No.N1020324462APA)

APA/URO Brake Pad Shim

from

$18.73
Platform specific rubber to metal composite material designed to solve noise and vibration problems. To effectively combat brake squeal, APA/URO utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. APA/URO brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.

Product Features:
  • Platform Specific Design
  • Combats Brake Squeal
  • OE-Style Composite Core Shim
  • Effective Thermal Barrier
See More

APA/URO Parts – Brake Pad Shim (Part No.N1020343980APA)

Brake Pad Shim

from

$20.02
Brake Pad Shim

Sebro – Electronic Brake Pad Sensor (Part No.N103030326SEB)

Electronic Brake Pad Sensor

from

$16.62
The Sebro Electronic Brake Pad Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

MTC – Brake Pad Sensor (Part No.N10301458514MTC)

Brake Pad Sensor

from

$7.06
Brake Pad Sensor

Pex – Disc Brake Pad Electronic Wear Sensor (Part No.WK11)

Disc Brake Pad Electronic Wear Sensor

from

$19.39
As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:
  • PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
  • Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
  • All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
  • Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
  • As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.
See More

Pex – Brake Pad Wear Sensor (Part No.N103023576PEX)

Brake Pad Wear Sensor

from

$24.85
PEX electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at PEX make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:
  • Exact Replacement with OE Fittings and Connectors
  • Resistant to Extreme High Heat
  • Highly Durable
  • Supplied with all required hardware
  • PEX is an OE supplier to Brake and Vehicle Manufacturers
See More

Aftermarket – Parking Brake Shoe S (Part No.N50022515492AFT)

Parking Brake Shoe S

from

$28.38
Parking Brake Shoe S

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000945829ZIC)

Coat-Z Brake Disc (Rotor)

from

$113.94
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Sebro – Coated Brake Rotor (Part No.N1000931087SEB)

Coated Brake Rotor

from

$130.13
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Upgrade your 1990 Porsche 944 with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1990 Porsche 944, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Porsche or enhancing its overall performance, Brake Parts are key to keeping your 944 functioning at its best. At Advance Auto Parts, we offer a wide selection of 18 Brake Parts for the 1990 Porsche 944, designed to meet your needs without breaking the bank. From Brake Booster replacements to Parking Brakes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1990 Porsche 944 at great prices. Our Brake Parts inventory for this model ranges from just $1.50 to $383.44, with an average price of $115.38. Our 18 Brake Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1990 Porsche 944 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Porsche 944 is always ready to roll. We’re committed to providing you with everything you need to keep your 944 in top shape, all in one place. Start shopping confidently below for your 1990 Porsche 944!

Best-Selling Brake Boosters for 1990 Porsche 944s

Enhance the driving experience in your Porsche with 2 quality Brake Booster components, starting at $136.99.

ATE – Pneumatic Brake Booster (Part No.N400030336ATE)

Pneumatic Brake Booster

from

$383.44
ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.

Product Features:
  • Original equipment (OE) quality
  • Wide range of single and tandem Brake Boosters
  • Unique tie-rod design meaning lighter and thinner parts for more efficient performance
  • Most units are made of steel, but lightweight aluminium versions are also available.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5713)

Vacuum Brake Booster: Without Master Cylinder

from

$136.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Most Popular 1990 Porsche 944 Parking Brakes

Customize your Porsche with 1 Parking Brakes products like Parking Brake Springs, all priced under $28.38.

Aftermarket – Parking Brake Shoe S (Part No.N50022515492AFT)

Parking Brake Shoe S

from

$28.38
Parking Brake Shoe S

Top Picks for 1990 Porsche 944 Brake Hardware Parts

Upgrade Porsche 944s with top-quality Brake Hardware Parts parts, including 1 OEM and aftermarket selections for your 1990 model.

Original Equipment – Brake Disc Set Screw (Part No.N1004649921OEA)

Brake Disc Set Screw

from

$1.50
Brake Disc Set Screw

In-Demand Brake Rotors and Drums for 1990 Porsche 944s

Select from 7 premium Brake Rotors and Drums parts for your 1990 Porsche 944, with prices ranging from $150.59 to $255.77.

Zimmermann Coated – Brake Disc (Part No.N10001863165ZXC)

Brake Disc

from

$255.77
Brake Disc

Zimmermann Coated – Brake Disc (Part No.N10001453810ZXC)

Brake Disc

from

$254.82
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • Better wet braking performance by permanent expulsion of brake dust and water
  • Sporty look
  • Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
  • Noticeable improvement in the braking power of your car
  • Prevention of brake fade
  • Countersinking of holes doubles up as wear indicator
  • 1:1 exchange of original disc possible
  • No additional adaption necessary
  • Not subject to registration: general ABE certification supplied with disc
See More

Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N1000948208ZXC)

Coat-Z Sport Brake Disc (Rotor)

from

$197.71
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • Better wet braking performance by permanent expulsion of brake dust and water
  • Sporty look
  • Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
  • Noticeable improvement in the braking power of your car
  • Prevention of brake fade
  • Countersinking of holes doubles up as wear indicator
  • 1:1 exchange of original disc possible
  • No additional adaption necessary
  • Not subject to registration: general ABE certification supplied with disc
See More

Sebro – Coated Brake Rotor (Part No.N10001863165SEB)

Coated Brake Rotor

from

$179.46
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Sebro – Coated Brake Rotor (Part No.N10001453810SEB)

Coated Brake Rotor

from

$178.32
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000948208ZIC)

Coat-Z Brake Disc (Rotor)

from

$154.80
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Sebro – Brake Disc (Part No.N10002515334SEB)

Brake Disc

from

$150.59
Brake Disc

Most Sold 1990 Porsche 944 Brake Pads and Shoes

Explore our best-selling Porsche parts for the 1990 944 among 7 OEM and aftermarket options starting from $11.06.

Autopart International Inc – Brake Pad Set (Part No.N10102965099API)

Brake Pad Set

from

$45.69
Brake Pad Set

Pex – Brake Pad Wear Sensor (Part No.N103030326PEX)

Brake Pad Wear Sensor

from

$23.51
PEX electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at PEX make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:
  • Exact Replacement with OE Fittings and Connectors
  • Resistant to Extreme High Heat
  • Highly Durable
  • Supplied with all required hardware
  • PEX is an OE supplier to Brake and Vehicle Manufacturers
See More

APA/URO Parts – Brake Pad Shim (Part No.N1020343980APA)

Brake Pad Shim

from

$20.02
Brake Pad Shim

Pex – Disc Brake Pad Electronic Wear Sensor (Part No.WK222)

Disc Brake Pad Electronic Wear Sensor

from

$19.39
As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:
  • PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
  • Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
  • All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
  • Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
  • As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.
See More

APA/URO Parts – APA/URO Brake Pad Shim (Part No.N1020324462APA)

APA/URO Brake Pad Shim

from

$18.73
Platform specific rubber to metal composite material designed to solve noise and vibration problems. To effectively combat brake squeal, APA/URO utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. APA/URO brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.

Product Features:
  • Platform Specific Design
  • Combats Brake Squeal
  • OE-Style Composite Core Shim
  • Effective Thermal Barrier
See More

Sebro – Electronic Brake Pad Sensor (Part No.N103030326SEB)

Electronic Brake Pad Sensor

from

$16.62
The Sebro Electronic Brake Pad Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Original Equipment – Original Equipment Brake Pad Shim (Part No.N102029038OEA)

Original Equipment Brake Pad Shim

from

$11.06
The Original Equipment Brake Pad Shim is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part. Original Equipment Brake Pad Shims are platform specific rubber to metal composite material designed to solve noise and vibration problems. OE brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.

Product Features:
  • Platform Specific Design
  • Combats Brake Squeal
  • OE-Style Composite Core Shim
  • Effective Thermal Barrier
See More

FAQs for 1990 Porsche 944 Brake Parts

Which Brake Parts are best-sellers for 1990 Porsche 944s?

Out of 18 Brake Parts that fit 1990 Porsche 944s, the following parts are the top sellers:

What’s the price range for 1990 Porsche 944 Brake Parts?

Brake Part prices for the 1990 Porsche 944 start at $1.50 and go up to $383.44 for the most premium parts.

What’s the average price of a Brake Part for a 1990 Porsche 944?

The average price for Brake Parts for the 1990 Porsche 944 is $115.38. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Porsche 944 model years?

Yes, we currently carry Brake Parts for 8 model years of Porsche 944s between 1983 and 1991. Brake Parts are bought most frequently for the following model years: 1991, 1989, 1988, 1987, 1986, 1985, 1984, and 1983.

What are the cheapest Brake Parts for my 1990 Porsche 944?

The cheapest 1990 Porsche 944 Brake Parts we carry in stock are:

What types of Brake Parts do you sell for my 1990 Porsche 944?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1990 Porsche 944:

Can I get help with 1990 Porsche 944 Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Porsche Brake Parts and more.

What is your return policy for Porsche 944 Brake Parts?

Advance Auto Parts keeps returns simple. For new Porsche 944 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.