1990 Pontiac Firebird Engine Parts

Below you will find various in-demand Pontiac Engine Parts, components and accessories for your 1990 Firebird. Advance Auto Parts has popular Firebird parts like Valve Cover and Cylinder Heads, Engine Gaskets and Seals, Engine Timing Parts and more. You’ll also find aftermarket and OEM Engine Parts for other Firebird model years including 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 and more. Select a category of 1990 Pontiac Firebird Engine Parts below and start saving instantly.

Popular 1990 Pontiac Firebird Engine Parts Categories

Valve Covers

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Timing Covers

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Cylinder Head Gaskets

Engine Coolant Pipe Gaskets

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Engine Camshaft Bolts

Engine Oil Pump Pickup Tube and Screens

Engine Computers

Rubber Freeze Plugs

O-Rings

Timing Cover Repair Sleeves

Oil Pump Shafts

Timing Cover Seals

Rocker Arms

Engine Valve Stem Seals

Piston and Liners

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Camshaft and Lifter Kits

Oil Pump Kits

Standard Piston Rings

Freeze Plug – Block Kits

Fuel Pump Flange Gaskets

Standard Individual Rod Bearings

Oil Pump Nylon Shaft Guides

Camshaft Plugs

Engine Valves

Rocker Arm Nuts

Standard Single Pistons

Expansion Plug – Pipes

Fuel Pump Gaskets

Engine Cylinder Head Plugs

Engine Oil Pump Bushing

Engine Valve Locks

Engine Rocker Arm Balls

Remanufactured Engines

Cylinder Heads

Engine Cylinder Head Nuts

Engine Assembly Lube

Engine Timing Cover Bolt Sets

Engine Top End Kits

Engine Oil Deep Sump Kits

Engine Camshaft Cap Gaskets

Engine Oil Pump Primers

Essential Engine Parts for 1990 Pontiac Firebirds

from

$1835.99

Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$10.99

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$216.99

Hex-A-Just Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. True Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$14.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Manufactured to fit a specific application
Provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system
It is recommended that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation
Oil pump screen assemblies are manufactured under strict quality guidelines
Utilizes ISO & QS certified manufacturing
5/8″ Inlet tube

from

$125.99

Made in USA. Melling high volume oil pumps increase the amount of oil flow by an average of 20% through the engine improving oil pressure at idle providing dependable performance every time in every application. Every Melling high volume oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling high volume oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. High volume gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
High volume oil pump supplies additional oil to engines when necessary for high performance applications or low oil pressure issues

from

$1152.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$7.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$151.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Road tested to ensure real world performance and to verify that each design meets our high standards for quality
Coating salt spray tested for over 200 hours to insure durability

from

$10.49

Formulated for prelubrication cam lobes, lifters & engine bearings
Increases load carrying capacity
Holds fast to surfaces
Exacting tolerances
Meets or exceeds OEM specifications
4.0 oz. Squeeze Container

from

$2.99

Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

from

$85.99

Powerbond Premium OEM Replacement Balancers are manufactured using premium ductile iron castings and injection bonded dampening rubber. Unlike typical original equipment balancers that are made with press inserted dampening rubber, the bonded dampening rubber in the Powerbond Premium OEM Replacement Balancer provides superior bonding strength between the inner and outer balancer rings that minimizes spinning and dislocation in high torque and serpentine belt appplications. With a unique combination of high strength castings, bonded dampening rubber, and dynamic balance, the Powerbond Premium OEM Replacement Balancer is the ultimate standard replacement balancer.

Product Features:

Designed as a premium OE replacement
Dynamically balanced for smooth operation
Strong Iron casting for maximum strength
OEM equivalent bonded rubber

from

$549.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$9.49

Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.

Product Features:

Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

As the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra strong 200,000 PSI bolts that let you exert maximum clamping force. Special features include 1/4 Inch thick, wide area washer and an extra tall 12 point head that accepts a deep socket and eliminates the worry of stripping the head.

Product Features:

Ultra Strong Bolt Rated At 200,000 PSI
1/4 Inch Thick, Wide Area Washer And An Extra Tall 12 Point Head That Accepts A Deep Socket And Eliminates The Worry Of Stripping The Head
Delivers ARP Quality And Reliability
Made In USA
12-Point Head
Sold Individually
200,000 PSI
2.470″ Underhead Length

from

$18.99

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Hypereutectic
Made with exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
Piston skirts protected by next-gen DUROSHIELD coating.
TAC ring groove geometry
Weight matched to +/- 2 grams.

from

$1.99

Our Pipe Plugs are manufactured with a high corrosion resistance for long-lasting performance. They’re conveniently available in packs of varying quantities.

Product Features:

Pipe Fitting-Pipe Plug-Hex Head-1/4 In. MNPT
Pipe Fitting-Pipe Plug-Hex Head-1/4 In. MNPT
Our Pipe Plugs are manufactured with a high corrosion resistance for long-lasting performance. They’re conveniently available in packs of varying quantities.
Direct replacement for a proper fit every time
Thread lock applied for increased locking action and leak prevention (where applicable)

from

$68.99

Chrome plated ring face
Increases wear resistance in dirty air conditions
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$37.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$107.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Prevents Stud Flexing
Black Plated Finish

from

$6.99

Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:

ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
Set of 3
180,000 PSI
.75″ Underhead Length

from

$12.79

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
Thermoplastic housing withstands heat stress for enhanced durability
Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
Neodymium magnet produces max high voltage output at all speeds

from

$8.99

you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.

Product Features:

Nominally Rated At 170,000 Psi Tensile Strength To Provide You With Plenty Of Clamping Force
Premium Grade Oil Pump Stud
The Studs Come With Flat Washers And Nuts
Black Oxide Finished 8740

from

$16.49

A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$7.49

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$26.49

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$24.99

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineering protects the engine from dirt and contaminants
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$6.49

from

$43.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

Upgrade your 1990 Pontiac Firebird with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1990 Pontiac Firebird, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Engine Parts are key to keeping your Firebird functioning at its best. At Advance Auto Parts, we offer a wide selection of 324 Engine Parts for the 1990 Pontiac Firebird, designed to meet your needs without breaking the bank. From Valve Cover and Cylinder Head replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1990 Pontiac Firebird at great prices. Our Engine Parts inventory for this model ranges from just $0.43 to $4,526.99, with an average price of $139.43. Our 324 Engine Parts in stock come from 24 trusted brands, so you’re sure to find the right part for your 1990 Pontiac Firebird without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Pontiac Firebird, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, National, Melling, and more. FELPRO Engine Parts start at just $2.49 and boast an impressive 4.6 stars average rating from customers. National and Melling also bring quality to the table, with Engine Parts available starting at $18.79, and at an average 4.3 stars rating. With 9,436 customer reviews and counting, our 1990 Pontiac Firebird Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Pontiac Firebird is always ready to roll. We’re committed to providing you with everything you need to keep your Firebird in top shape, all in one place. Start shopping confidently below for your 1990 Pontiac Firebird!

Best-Selling Valve Cover and Cylinder Heads for 1990 Pontiac Firebirds

Enhance the driving experience in your Pontiac with 47 quality Valve Cover and Cylinder Head components, starting at $0.43.

show more show less

from

$0.43

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$2.99

from

$2.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$73.99

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$14.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$35.99

PermaTorque head gaskets meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Requires no retorquing of the head bolts
Manufactured for the repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$97.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$105.99

Chrome plated steel valve cover caps. Fits over original valve covers on 1987-1997 GM (General Motors) small block truck applications only. These caps fit OVER the top of the original equipment valve covers & the original equipment covers use the stock fill cap, breathers, PCV, grommets, and hardware.

Product Features:

Chrome plated steel construction
These Caps Fit Over Existing Factory Stock Painted Valve Covers
Fits Over Truck Center-Bolt Valve Covers
Sold as a pair
Fits Truck applications only
Stock OEM Truck Valve Covers Must Remain in Place & Reuse the Existing Hardware, Breathers, Fill Cap, PVC & Grommets

from

$117.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$24.99

Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications
New OEM riveted pin retaining design

from

$42.99

Product Features:

DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$8.79

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$32.99

PermaTorque head gaskets meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Built to exceed all original equipment specifications
Provides the robust seal needed to contain peak combustion pressures and temperatures
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$0.65

from

$2.99

from

$288.99

COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.

Product Features:

.842″ diameter; 122g weight; 2.66″ seat height
Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
Decrease friction and increase longevity when directly compared to flat tappet lifters
Accept much more aggressive cam profiles than flat tappet lifters will allow

from

$6.49

from

$32.99

Product Features:

DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$4.99

Chrome plated stem
Hard coating added to surface for strength & aiding in lubrication
Note – coating added in varying thicknesses depending on application
Innovative design, using leading edge materials
Utilizes ISO & QS certified manufacturing

from

$142.99

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 PSI Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

from

$98.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:

Made Of 8740 Chrome Moly Forgings
Heat Treated To 180,000 PSI
Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
Lengths Are Exact Designed To Provide Positive Seating Every Time
Set of 16
.800″ Adjuster Thread Length
3/8-24 Shank Diameter and Thread
3/8″ Typical Small Block Application

from

$479.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
Super Locks are recommended in all race applications

from

$3.29

This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Popular 1990 Pontiac Firebird Engine Gaskets and Seals

Customize your Pontiac with 26 Engine Gaskets and Seals products like Valve Cover Gaskets, Oil Pan Gaskets, and Timing Cover Gasket Sets, all priced under $226.99.

show more show less

from

$3.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$43.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$2.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$22.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$22.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$3.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$34.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$20.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$12.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$32.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$21.49

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$17.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$48.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .187 inch thick. Fits Chevy 5.0, 5.7L Vortec V8 with center bolt valve covers.

Product Features:

Manufactured from high-density cork/rubber blend gasket material
Provides excellent sealing and durability
For OE replacement, high performance street, drag race and oval track

from

$67.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over a rigid carrier which resists high heat
SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$36.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$52.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$226.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$144.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$132.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$65.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$18.99

Product Features:

For Small-Block Chevy
One Piece Configuration
Includes Front Cover Gasket & Front Seal
Includes Necessary Gaskets & Crankshaft Oil Seal
For Replacement Or Installation

from

$5.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$4.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Top Picks for 1990 Pontiac Firebird Engine Timing Parts

Upgrade Pontiac Firebirds with top-quality Engine Timing Parts parts, including 30 OEM and aftermarket selections for your 1990 model.

show more show less

from

$18.79

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$46.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$45.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$82.99

Features 3 ways of optional timing adjustment. The Zoom Timing Gear Set features nodular iron sprockets and a dual-row roller chain for accuracy and durability.

from

$11.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$22.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$44.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. SET INCLUDES: 9-5059 Engine Timing Damper (1 EA), C373 Engine Timing Chain (1 EA), S506T Engine Timing Camshaft Sprocket (1 EA), S511 Engine Timing Crankshaft Sprocket (1 EA).

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$34.49

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$90.99

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. Seamless True Roller 0.250″ Roller Diameter Chain for Reduced Friction. 100% USA Made

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$19.99

Street Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. Seamless 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life. USA Made.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$19.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$15.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$29.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

For Use With All V8 Chevy, 12 Point Head Type, Black Oxide, Chrome Moly

from

$19.99

ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so That is why ARP came up with these super tough bolts (your choice of chrome moly steel or polished stainless (ARP 300) both rated 170,000 PSI). The stainless has the added advantage of being rust and corrosion resistant.

Product Features:

Made From Black Oxide Finished 8740 Chrome Moly
Nominally Rated At 170,000 Psi Tensile Strength
Super Tough Bolts
Compact 12 Point Fasteners

from

$15.99

If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Metal with Nitrile rubber seal.

Product Features:

Nitrile Rubber And High Density Cork
Will Not Shrink Or Stick

from

$77.99

High Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Ulitimate Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$233.99

HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$221.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$216.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$165.99

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$159.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$159.99

Billet Crank Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Sprockets Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$157.99

Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. True Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

In-Demand Camshafts for 1990 Pontiac Firebirds

Select from 18 premium Camshafts parts for your 1990 Pontiac Firebird, with prices ranging from $2.99 to $434.99.

show more show less

from

$2.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$49.99

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$322.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$32.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$3.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$49.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$72.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

Steel backed micro Babbitt lining material
Used in automotive and high-performance, Babbitt is designed to deform under extreme loads with o damaging other engine parts.
Fatigue life of cam bearings are nearly doubled
Ensures dependable performance and superior service life
Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
Application-specific design for perfect fit and correct operation

from

$4.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$30.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$60.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$434.99

Product Features:

Ideal for street high performance and racing applications
Use stock ratio rocker arms only
Use stock ratio rocker arms only
Basic operating RPM range is between 1, 500-6, 500 RPM
Use with Edelbrock aftermarket cylinder heads, adjustable valve-train components and 9. 5: 1 compression ratio

from

$6.99

ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
Set of 3
180,000 PSI
.75″ Underhead Length

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Each gasket is built to meet or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$3.99

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Sold 1990 Pontiac Firebird Engine Mounts

Explore our best-selling Pontiac parts for the 1990 Firebird among 5 OEM and aftermarket options starting from $10.99.

show more show less

from

$13.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 68-96; CADI 76-96; CHEV 72-05; GMC 73-99; OLDS 73-92; PONT 73-92;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1968-2005
Weight approx: 3 Lbs
PRODUCT: MADE IN THE USA
DESIGN: CLAMSHELL
PART GROUP: 2292, 2292

from

$40.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$10.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 82-02; GMC 85-96; PONT 82-02;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1982-2002
Weight approx: 3 Lbs

from

$61.99

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$61.99

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

Top-Rated Engine Parts Brands For Your 1990 Pontiac Firebird

Shop for the best-rated brands offering Engine Parts and other products for your 1990 Pontiac Firebirds. Below you’ll find some of our best rated Engine Parts from FELPRO, National, and Melling, and more. Engine Parts from these brands that fit a 1990 Firebird start at just $2.49 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1990 Pontiac Firebird Engine Parts

When it comes to maintaining or upgrading your 1990 Pontiac Firebird, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1990 Pontiac Firebird. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.49, with an average price of just $16.82. Plus, with over 89 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $43.99

(49)

Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included

“Excellent set, The plastic alignment pins helped out alot.”

from $3.99

(26)

Fuel Pump Mounting Gasket

“Needed for pump that was bought”

from $2.49

(14)

Fuel Pump Mounting Gasket

“Felpro is the best”

Popular National 1990 Pontiac Firebird Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 1990 Pontiac Firebird owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1990 Firebird, Advance Auto Parts carries a full inventory of 3 National Engine Parts. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these National Engine Parts range from $18.79 to $45.99, plus, with more than 7 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $18.79

(5)

Engine Harmonic Balancer Repair Sleeve

“Simple device. Durable. Easy to install”

from $45.99

(1)

Shaft Repair Sleeve

“To use this sleeve on a torque converter, the supplied tool isn’t long enough. However a piece of PVC pipe can work. (normally this is used on a harmo”

from $20.49

(1)

Multi-Purpose Seal

“went in easy”

FAQs for 1990 Pontiac Firebird Engine Parts

Which Engine Parts are best-sellers for 1990 Pontiac Firebirds?

Out of 324 Engine Parts that fit 1990 Pontiac Firebirds, the following parts are the top sellers:

Engine Valve Lifter (5681081) – $14.49
Fuel Pump Mounting Gasket (5183804) – $3.99
Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included (5720575) – $43.99

What’s the price range for 1990 Pontiac Firebird Engine Parts?

Engine Part prices for the 1990 Pontiac Firebird start at $0.43 and go up to $4,526.99 for the most premium parts.

What’s the average price of a Engine Part for a 1990 Pontiac Firebird?

The average price for Engine Parts for the 1990 Pontiac Firebird is $139.43. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Pontiac Firebird model years?

Yes, we currently carry Engine Parts for 34 model years of Pontiac Firebirds between 1967 and 2002. Engine Parts are bought most frequently for the following model years: 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, and 1994.

What are the cheapest Engine Parts for my 1990 Pontiac Firebird?

The cheapest 1990 Pontiac Firebird Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694179) – $0.43
Engine Rocker Arm Ball (19694261) – $0.65
Steel Cup Expansion Plug 34.3mm, Height 0.497 (3492699) – $1.29
Steel Cup Expansion Plug 34.3mm, Height 0.497 (Sold by each) (16140166) – $1.79
Steel Cup Expansion Plug 41.5mm, Height 0.536 (Sold by each) (16140156) – $1.79

What are the top-rated Engine Parts that fit the 1990 Pontiac Firebird?

Out of 9,436 reviews by customers, our 1990 Pontiac Firebird Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1990 Pontiac Firebird and their top-rated products:

Valve Cover and Cylinder Heads
- Engine Valve Spring Retainer Keeper (19694179) – $0.43
- Engine Valve Spring (3687899) – $2.49
- Engine Push Rod (3689670) – $2.99
Engine Gaskets and Seals
- Engine Valve Spring Retainer Keeper (19694179) – $0.43
- Engine Valve Spring (3687899) – $2.49
- Engine Push Rod (3689670) – $2.99

What types of Engine Parts do you sell for my 1990 Pontiac Firebird?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1990 Pontiac Firebird:

Can I get help with 1990 Pontiac Firebird Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Engine Parts and more.

What is your return policy for Pontiac Firebird Engine Parts?

Advance Auto Parts keeps returns simple. For new Pontiac Firebird Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1990 Pontiac Firebird Engine Parts

Spartan – Engine Long Block; Chev 2.8 87-88 Engine (Part No.DCA1)

Carquest Premium – Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10099)

Cloyes Performance – High Performance Timing Set (Part No.9-3145B)

Sealed Power – Engine Oil Pump Screen (Part No.224-1246)

Melling – Stock Replacement OE Type High Volume Oil Pump (Part No.M-95HV)

Competition Cams – Xtreme Energy 218/224 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-422-8)

Sealed Power – Engine Valve Lifter (Part No.HT-2095B)

Spectra Premium – Engine Oil Pan (Part No.GMP02A)

Sealed Power – Engine Assembly Lubricant (Part No.55-400)

Sealed Power – Engine Rocker Arm (Part No.R-856A)

PowerBond – Harmonic Balancer (Part No.PB1147N)

Competition Cams – Magnum 230/230 Hydraulic Roller Cam (Part No.12-450-8)

Dorman – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.02604)

ARP Auto Racing – For Use With Chevy Small Block, 5/8" Socket Size, 3/4" – 16 Thread Size (Part No.134-2501)

Sealed Power – Engine Piston Set (Part No.H423DCP)

Dorman – Pik-a-Nut – Pipe Fitting-Pipe Plug-Hex Head-1/4 In. MNPT (Part No.321214.1)

Sealed Power – Engine Piston Ring Set (Part No.E-251KC)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71039)

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

ARP Auto Racing – Small Block/ Big Block Chevy, 5/16" – 18 Thread Size, .75" Head L, 1/2" Socket (Part No.134-1001)

Carquest – Air Charge Temperature Sensor Connector (Part No.28423)

ARP Auto Racing – For Use With Chevy Small Block, Hex Head, Black Oxide, Chrome Moly (Part No.230-7001)

Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-95)

Sealed Power – Engine Connecting Rod Bearing (Part No.2020CP 30)

Sealed Power – Engine Camshaft Bearing Set (Part No.1889M)

Melling – Stock Replacement Oil Pump Screen (Part No.62-CS1)

Sealed Power – Engine Push Rod (Part No.RP-3349)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included (Part No.OS 34500 R)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Sealed Power – Engine Push Rod (Part No.RP-3262)

Sealed Power – Engine Valve Spring (Part No.VS-677)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72856)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 7733 PT-15)

Sealed Power – Engine Valve Lifter (Part No.HT-2148)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.7733 PT-2)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 8510 PT-4)

Mr. Gasket – Valve Cover (Part No.9847)

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Sealed Power – Engine Valve Lifter (Part No.HT-2148A)

Felpro – Severe Duty Engine Cylinder Head Gasket (Part No.501 SD)

Sealed Power – Engine Valve Lifter (Part No.HT-2095)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.8510 PT)

Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)

Sealed Power – Engine Push Rod (Part No.RP-3207)

Competition Cams – LIFTERS, LS SERIES OE STYLE HYD RLR 1 ST (Part No.850-16)

Sealed Power – Engine Exhaust Valve (Part No.V-1904)

Felpro – Severe Duty Engine Cylinder Head Gasket (Part No.505 SD)

Sealed Power – Engine Intake Valve (Part No.V-1926)

ARP Auto Racing – For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile (Part No.134-3701)

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

Competition Cams – Set of 16 – 10 Degree, 11/32", Single Groove Locks w/ Lash Cap Recess (Part No.611-16)

Dorman – Pipe Plug C.S. Square 3/8-18 Npt, Head Size 5/16 In. (Sold by each) (Part No.090-019)

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included (Part No.OS 34500 R)

Felpro – Fuel Pump Mounting Gasket (Part No.5182)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72527)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45265)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72526)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35571)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50088 R)

Felpro – TIMING COVER GASKET SET (Part No.TCS 45121)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45828)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40626)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50293 R)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50272 C)

Mr. Gasket – Valve Cover Gasket Set (Part No.168)

Felpro – VALVE COVER GASKET SET (Part No.VS 50272 T)

National – Multi-Purpose Seal (Part No.4307V)

National – Shaft Repair Sleeve (Part No.99298)

Felpro – Engine Gasket Set (Part No.260-1478)

Felpro – Engine Gasket Set (Part No.260-1247)

Felpro – Engine Gasket Set (Part No.260-1246)

Felpro – Engine Conversion Gasket Set (Part No.CS 9471)

Edelbrock – Front Timing Cover Gasket Set #6997 For Small-Block Chevy, With Front Seal (Part No.6997)

Victor Reinz – Engine Timing Cover Gasket (Part No.71-14069-00)

MAHLE Original – Engine Timing Cover Gasket (Part No.T31259)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

Dorman – Timing Cover Kit (Part No.635-513)

National – Shaft Repair Sleeve (Part No.99174)