1990 Oldsmobile Custom Cruiser Alternators and Starters
Find Your Specific 1990 Oldsmobile Custom Cruiser Alternators and Starters
Below you will find various in-demand Oldsmobile Alternators and Starters, components and accessories for your 1990 Custom Cruiser. Advance Auto Parts has popular Custom Cruiser parts like Ignition Lock Parts, Alternator Parts, Voltage Regulator Parts and more. You’ll also find aftermarket and OEM Alternators and Starters for other Custom Cruiser model years including
1983,
1984,
1985,
1986,
1987,
1988,
1989,
1991,
1992 and more. Select a category of 1990 Oldsmobile Custom Cruiser Alternators and Starters below and start saving instantly.
Popular 1990 Oldsmobile Custom Cruiser Alternators and Starters Categories
Essential Alternators and Starters for 1990 Oldsmobile Custom Cruisers
Carquest Premium – Starter Solenoid (Part No.SAC1146)
from
$39.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Starter Solenoid (Part No.S100)
from
$32.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- The BWD SELECT® solenoids contain more pure copper windings than found on most vehicles and create a stronger magnetic field in even the hottest environments for better performance.
- The BWD SELECT® solenoids contain cadmium-plated copper discs and solid contact bolts reduce voltage drop to deliver full battery power to the starter and have pure copper battery terminal studs that reduce resistance and permit higher current flow.
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.3696S)
from
$83.99
The Carquest Premium Remanufactured Starter is engineered to deliver reliable performance and long-lasting durability, meeting or exceeding O.E.M. specifications. Each unit undergoes a rigorous triple-testing process, ensuring top-notch quality and functionality. Unlike rebuilt starters, this remanufactured unit features all-new wear components, including brushes, bushings, and bearings, for enhanced dependability. Designed with a 9-tooth configuration and operating at 12.0 VDC, it is part of the trusted Delco family, ensuring compatibility and precision fit for your vehicle. For added peace of mind, Carquest offers a Tech Hotline staffed by ASE Certified Technicians to assist with any technical inquiries. Choose this starter for a dependable solution that combines superior craftsmanship with exceptional value.
Product Features:
See More
Product Features:
- Each unit is triple-tested to ensure quality and performance
- All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
- Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
- Designed to meet or exceed O.E.M. specifications, ensuring reliable performance and compatibility with your vehicle.
- Part of the trusted Delco family, offering precision fit and dependable operation.
Product Features:
Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.6418S)
from
$116.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Each unit is triple-tested to ensure quality and performance
- All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
- Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
- Remanufactured to meet or exceed OE specifications for fit, form, and function, ensuring reliable performance and compatibility.
- 100% electronic testing of all critical components and the entire unit guarantees optimal functionality and durability.
Product Features:
GM Genuine Parts – Ignition Lock Cylinder with Key (Part No.D1402B)
Carquest Premium – Ignition Lock Cylinder (Part No.CSA1672)
from
$28.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Dorman – Help – Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (Part No.02350)
from
$9.99
Our Starter Motor Shims are manufactured with a high corrosion resistance for long-lasting performance. The shims effectively space out the starter for proper alignment.
Product Features:
See More
Product Features:
- Conveniently available in various styles and in packs of different quantities
- High quality steel construction
- Shimming helps stop whining and/or grinding noises from the starter motor when due to improper alignment
- Dorman’s Starter Motor Shims are constructed to strict engineering quality standards
Carquest – Starter Bushing (Part No.SB0)
from
$3.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Starter Bushing (Part No.SBA5213)
from
$2.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Alternator Electrical Connector (Part No.PT68)
from
$4.29
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Multi-Use Connector (Part No.PTA1047)
from
$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – New Voltage Regulator (Part No.RAA3137)
from
$48.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest Premium – New Voltage Regulator (Part No.RAA1056)
from
$24.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest – Starter Brush Set (Part No.X265)
from
$6.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Starter Brush (Part No.XAA1046)
from
$1.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Brush (Part No.XAA1014)
from
$5.29
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Multi-Use Connector (Part No.PTA1127)
from
$19.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Multi-Use Connector (Part No.PTA1165)
from
$30.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Multi-Use Connector (Part No.PTA1263)
from
$14.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Bosch – Alternator: New, 105 Amps, Limited Lifetime Warranty (Part No.AL668N)
from
$174.99
The Bosch Premium Alternator delivers exceptional performance and reliability, making it a top choice for demanding driving conditions. Engineered with 100% new components, it is built to endure the harshest environments, ensuring optimal functionality and an extended lifespan. Designed to handle excessive heat and high electrical demands, this alternator provides consistent power with a 105-amp rating and 12 VDC output. Its clockwise rotation and precisely gauged, resized, or rethreaded mounting points ensure a perfect fit for seamless installation. As an added benefit, every purchase includes free 24-hour Roadside Assistance Protection, offering peace of mind on the road. Choose Bosch for a durable, high-performance alternator that keeps your vehicle running smoothly.
Product Features:
See More
Product Features:
- 100% new components withstand the harshest environments for the best performance and longest life
- Built specifically to withstand excessive heat and high electrical demands.
- All mounting points 100% gauged and resized or rethreaded for proper fit
- Free 24-hour Roadside Assistance Protection with purchase of any Bosch Alternator
- Engineered for consistent power delivery, the 105-amp rating ensures reliable performance under demanding electrical loads.
Product Features:
Carquest HD Electrical – Alternator: New, 94 Amps, With Pulley (Part No.71-7294-3N)
from
$197.99
Carquest Starters with 100% NEW construction will restore hard working vehicles to exceed OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest HD alternators are pri
Product Features:
See More
Product Features:
- High quality components form the foundation our parts are built from. Transpo’s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
- Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
- Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
- Integrated magnetic switch provides protection against weak power from batteries.
- Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
- Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
- Load dump protection ensures transient voltage spikes do not damage transistor
- Improved power transmission with lower engine speed keeps accessories and powered implements running at maximum output without additional load to the engine.
Carquest Standard – Alternator: Remanufactured, 105 Amps, 1 Year Limited Warranty (Part No.7861-11AV)
from
$96.99
Carquest Standard alternators are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard alternators are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Product Features:
National – Multi-Purpose Bearing (Part No.MNJ-471-S)
from
$14.49
Product Features:
See More
- RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
FAG US – Radial Insert Ball Bearing (Part No.6203-RSR)
from
$36.49
We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.
Product Features:
See More
Product Features:
- Radial Ball Bearing, Both Sides Shield.
- Coverage of classic and new high-tech solutions for the best system coverage
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1015)
from
$25.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1039)
from
$33.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1008)
from
$31.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Upgrade your 1990 Oldsmobile Custom Cruiser with Top-Quality Alternators and Starters
When it comes to maintaining or upgrading your 1990 Oldsmobile Custom Cruiser, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Alternators and Starters are key to keeping your Custom Cruiser functioning at its best. At Advance Auto Parts, we offer a wide selection of 17 Alternators and Starters for the 1990 Oldsmobile Custom Cruiser, designed to meet your needs without breaking the bank.
From
Ignition Lock Part
replacements to
Alternator Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 1990 Oldsmobile Custom Cruiser at great prices.
Our Alternators and Starters inventory for this model
ranges from just $1.99 to $108.99, with
an average price of $37.02.
Our 17 Alternators and Starters in stock come from 6 trusted brands, so you’re sure to find the right part for your 1990 Oldsmobile Custom Cruiser without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Oldsmobile Custom Cruiser, we stock popular OEM and aftermarket Alternators and Starters from top names
like Locksmart, Carquest Premium, DriveWorks, and more.
Locksmart Alternators and Starters
start at just $25.05 and boast an impressive 4.5 stars average rating from customers.
Carquest Premium and DriveWorks also bring quality to the table, with Alternators and Starters available starting at $13.49, and at an average 4.4 stars rating.
With 40 customer reviews and counting, our 1990 Oldsmobile Custom Cruiser Alternators and Starters have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1990 Oldsmobile Custom Cruiser is always ready to roll. We’re committed to providing you with everything you need to keep your Custom Cruiser in top shape, all in one place.
Start shopping confidently below for your 1990 Oldsmobile Custom Cruiser!
Best-Selling Ignition Lock Parts for 1990 Oldsmobile Custom Cruisers
Enhance the driving experience in your Oldsmobile with 3 quality Ignition Lock Part components, starting at $25.05.
Locksmart – Ignition Lock Cylinder (Part No.LC14280)
from
$25.05
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
- Constructed from high-grade materials to ensure durability and longevity
- Undergoes 100% testing for proper fit, form, and function
- As a global manufacturer, we maintain complete quality control throughout the manufacturing process
Carquest Premium – Ignition Lock Cylinder (Part No.CSA1384)
from
$27.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Lock Cylinder (Part No.CSC1733)
from
$27.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Most Popular 1990 Oldsmobile Custom Cruiser Alternator Parts
Customize your Oldsmobile with 6 Alternator Parts products
like Alternators,
Alternator Pigtails, and
Commutator End Bearings, all
priced under $108.99.
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi-Purpose Bearing (Part No.MNJ-471-S)
from
$14.49
Product Features:
See More
- RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Carquest Premium – Multi-Use Connector (Part No.PTA1047)
from
$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Alternator: Remanufactured, 85 Amps, Limited Lifetime Warranty (Part No.7808-3A)
from
$108.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1021)
from
$68.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1047)
from
$65.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Top Picks for 1990 Oldsmobile Custom Cruiser Voltage Regulator Parts
Upgrade Oldsmobile Custom Cruisers with top-quality Voltage Regulator Parts parts, including 2 OEM and aftermarket selections for your 1990 model.
Carquest Premium – New Voltage Regulator (Part No.RAA3137)
from
$48.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest Premium – Multi-Use Connector (Part No.PTA1127)
from
$19.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
In-Demand Starter Parts for 1990 Oldsmobile Custom Cruisers
Select from 6 premium Starter Parts parts for your 1990 Oldsmobile Custom Cruiser, with prices ranging from $1.99 to $93.99.
Dorman – Help – Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (Part No.02350)
from
$9.99
Our Starter Motor Shims are manufactured with a high corrosion resistance for long-lasting performance. The shims effectively space out the starter for proper alignment.
Product Features:
See More
Product Features:
- Conveniently available in various styles and in packs of different quantities
- High quality steel construction
- Shimming helps stop whining and/or grinding noises from the starter motor when due to improper alignment
- Dorman’s Starter Motor Shims are constructed to strict engineering quality standards
Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.6315S)
from
$93.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Each unit is triple-tested to ensure quality and performance
- All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
- Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
- Remanufactured to meet or exceed OE specifications for fit, form, and function, ensuring reliable performance and compatibility.
- 100% electronic testing of all critical components and the entire unit guarantees optimal functionality and durability.
Carquest Premium – Starter Solenoid (Part No.SBC3223)
from
$43.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Starter Solenoid (Part No.84C1006)
from
$33.99
The Starter Solenoid is the relay of the starting circuit that carries the high amperage required when the starter motor is engaged. The solenoid is typically energized by the starter switch when commanded by the vehicle operator. Starter solenoids may also be used in other high amperage circuits, compare solenoid specification to your circuit needs before installing.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Bushing (Part No.SBA5144)
from
$2.49
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Brush (Part No.XAA1046)
from
$1.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Top-Rated Alternators and Starters Brands For Your 1990 Oldsmobile Custom Cruiser
Shop for the best-rated brands offering Alternators and Starters and other products for your 1990 Oldsmobile Custom Cruisers. Below you’ll find some of our best rated Alternators and Starters from Locksmart, Carquest Premium, and DriveWorks, and more. Alternators and Starters from these brands that fit a 1990 Custom Cruiser start at just $13.49 and are rated as high as 4.5 stars. OEM and aftermarket Alternators and Starters don’t get more top quality, durable, and affordable than from the brands below.
Popular Locksmart 1990 Oldsmobile Custom Cruiser Alternators and Starters
When it comes to maintaining or upgrading your 1990 Oldsmobile Custom Cruiser, using quality Alternators and Starters is essential to ensure durability and a perfect fit. Locksmart ticks all of those boxes. We offer a wide selection of Locksmart Alternators and Starters, specifically designed for the 1990 Oldsmobile Custom Cruiser. With over 1 Locksmart brand Alternators and Starters in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $25.05. Plus, with over 25 customer reviews and an average rating of 4.5 stars, you can trust that our Locksmart Alternators and Starters will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Carquest Premium 1990 Oldsmobile Custom Cruiser Alternators and Starters
Carquest Premium auto parts is one of the highest quality Alternators and Starter brands in the market. Any 1990 Oldsmobile Custom Cruiser owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1990 Custom Cruiser, Advance Auto Parts carries a full inventory of 1 Carquest Premium Alternators and Starters. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Carquest Premium Alternators and Starters range up to $93.99, plus, with more than 1 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Alternators and Starters below will deliver on both quality and value.
from
$93.99
(1)
Starter: Remanufactured, Limited Lifetime Warranty
“Nuts on terminal not tight positive was spining”
FAQs for 1990 Oldsmobile Custom Cruiser Alternators and Starters
Which Alternators and Starters are best-sellers for 1990 Oldsmobile Custom Cruisers?
Out of 17 Alternators and Starters that fit 1990 Oldsmobile Custom Cruisers, the following parts are the top sellers:
- Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (89014926) – $9.99
- Multi-Use Connector (12443337) – $20.99
- Starter: Remanufactured, Limited Lifetime Warranty (5220521) – $93.99
What’s the price range for 1990 Oldsmobile Custom Cruiser Alternators and Starters?
Alternators and Starter prices for the 1990 Oldsmobile Custom Cruiser start at $1.99 and go up to $108.99 for the most premium parts.
What’s the average price of a Alternators and Starter for a 1990 Oldsmobile Custom Cruiser?
The average price for Alternators and Starters for the 1990 Oldsmobile Custom Cruiser is $37.02. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Alternators and Starters for other Oldsmobile Custom Cruiser model years?
What are the cheapest Alternators and Starters for my 1990 Oldsmobile Custom Cruiser?
The cheapest 1990 Oldsmobile Custom Cruiser Alternators and Starters we carry in stock are:
- Starter Brush (12521051) – $1.99
- Starter Bushing (12522134) – $2.49
- Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (89014926) – $9.99
- Ball Bearing (5050642) – $13.49
- Multi-Purpose Bearing (3277607) – $14.49
What are the top-rated Alternators and Starters that fit the 1990 Oldsmobile Custom Cruiser?
Out of 40 reviews by customers, our 1990 Oldsmobile Custom Cruiser Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 1990 Oldsmobile Custom Cruiser and their top-rated products:
- Alternator Parts
- Ball Bearing (5050642) – $13.49
- Multi-Purpose Bearing (3277607) – $14.49
- Starter Parts
- Ball Bearing (5050642) – $13.49
- Multi-Purpose Bearing (3277607) – $14.49
- Ignition Lock Parts
- Ball Bearing (5050642) – $13.49
- Multi-Purpose Bearing (3277607) – $14.49
What types of Alternators and Starters do you sell for my 1990 Oldsmobile Custom Cruiser?
As of 11/2/25, these are some of the most in-demand types of Alternators and Starters for a 1990 Oldsmobile Custom Cruiser:
Can I get help with 1990 Oldsmobile Custom Cruiser Alternators and Starter orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Alternators and Starters and more.
What is your return policy for Oldsmobile Custom Cruiser Alternators and Starters?
Advance Auto Parts keeps returns simple. For new Oldsmobile Custom Cruiser Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
