1990 Jeep Wagoneer Ball Joints

Essential 1990 Jeep Wagoneer Ball Joints

MOOG – Ball Joint (Part No.K100198)

Ball Joint

from

$118.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Ball Joint (Part No.K100056)

Ball Joint

from

$155.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Driveworks – Suspension Ball Joint (Part No.DW-K8194THD)

Suspension Ball Joint

from

$22.99
Driveworks ball joints are made to meet or exceed OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks chassis parts ensure improved steering response and durability.
See More

MOOG – Ball Joint (Part No.K3137T)

Ball Joint

from

$109.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG – Ball Joint (Part No.K7403)

Ball Joint

from

$92.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Driveworks – Ball Joint (Part No.DW-K3161T)

Ball Joint

from

$45.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot provides extended temperature range and better wear resistance
  • Test-proven stud material helps prevent premature stud failure
  • Provides premium gauge steel construction for strength and durability
  • Performance tested to ensure durability
See More

MOOG – Ball Joint (Part No.K8195T)

Ball Joint

from

$64.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Yukon Gear – Ball Joint Kit For Dana 30, Dana 44 & GM 8.5", Not Dodge, One Side (Part No.33453)

Ball Joint Kit For Dana 30, Dana 44 & GM 8.5", Not Dodge, One Side

from

$155.99
Ball Joint kit for Dana 30, Dana 44 & GM 8.5″, not Dodge, one side. This replaces Spicer part number 706116X.

Product Features:
  • Ball joint kit for Dana Spicer 30 and 44
  • Complete kit for upper and lower
  • Services one side
  • Replaces Spicer part number 706116X
See More

Driveworks – Suspension Ball Joint (Part No.DW-K8195THD)

Suspension Ball Joint

from

$17.79
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Driveworks – Suspension Ball Joint Kit (Part No.DW-K7403)

Suspension Ball Joint Kit

from

$39.99
Suspension Ball Joint Kit

Driveworks – Ball Joint (Part No.DW-K3134T)

Ball Joint

from

$55.99
Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Driveworks – BALL JOINT 1 EA DRIVE (Part No.DW-K8195T)

BALL JOINT 1 EA DRIVE

from

$35.99
Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Driveworks – BALL JOINT 1 EA DRIVE (Part No.DW-K8194T)

BALL JOINT 1 EA DRIVE

from

$50.99
Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

TRW – Ball Joint (Part No.L2020451363TRW)

Ball Joint

from

$97.68
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
See More

TRW – Ball Joint (Part No.L2020451367TRW)

Ball Joint

from

$61.61
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
See More

TRW – Ball Joint (Part No.L2020451428TRW)

Ball Joint

from

$75.11
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
See More

Driveworks – Ball Joint (Part No.DW-K3137T)

Ball Joint

from

$43.99
Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Carquest Premium – Ball Joint (Part No.400-71287)

Ball Joint

from

$67.99
CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hardware included for easier installation (where applicable)
  • Knurling improves retention between the control arm/knuckle and ball joint housing
See More

MOOG – Ball Joint (Part No.K3134T)

Ball Joint

from

$84.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Rare Parts – Ball Joint (Part No.RP71301)

Ball Joint

from

$222.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

MOOG – Ball Joint (Part No.K100311)

Ball Joint

from

$165.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ADJUSTABLE — Allows for camber and caster changes
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
  • RESTORES RIDE — Provides revamped steering and handling feel
See More

MOOG – Ball Joint (Part No.K8195T005)

Ball Joint

from

$42.99
Ball Joint

Rare Parts – Ball Joint (Part No.RP71302)

Ball Joint

from

$186.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

MOOG – Ball Joint (Part No.K8194T)

Ball Joint

from

$68.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Omix – Ball Joint (Part No.18038.01)

Ball Joint

from

$49.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • 1 Lower With Hardware
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

MOOG – Ball Joint (Part No.K3161T)

Ball Joint

from

$81.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Omix – Ball Joint (Part No.18037.01)

Ball Joint

from

$36.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • 1 Upper
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Rare Parts – Ball Joint (Part No.RP10150)

Ball Joint

from

$23.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

1990 Jeep Wagoneer Ball Joints

Maybe you’re in the middle of a full rebuild of that 1990 Jeep Wagoneer. Maybe you just need a couple of Ball Joints. Either way, Advance Auto Parts has 18 different Ball Joints in our inventory ranging from $39.99 to $223.99. That means you can find the exact parts or products you need to keep that 1990 Jeep Wagoneer running smoothly.

Ball Joints are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Jeep Wagoneer. DriveWorks, Moog, and TRW are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ball Joints for your 1990 Jeep Wagoneer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Ball Joints to keep your 1990 Jeep Wagoneer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ball Joints Brands To Make Your 1990 Jeep Wagoneer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Jeep Wagoneer demands trusted brand parts and products to keep it running. Many trusted brands of Ball Joints make up Advance Auto Parts’ inventory, and all are ready to help make your Wagoneer the best it can be. Be sure to browse some of our top Ball Joints brands and parts.

Popular MOOG Ball Joints

We carry MOOG parts in our stock across Lower Ball Joints categories, plus more. For a 1990 Jeep Wagoneer, our most popular MOOG Ball Joints include:
Ball Joint
from $81.99
(14)
Ball Joint
Lower Ball Joints
Ball Joint
from $84.99
(34)
Ball Joint
Lower Ball Joints

FAQs for 1990 Jeep Wagoneer Ball Joints

What are the most purchased Ball Joints for the 1990 Jeep Wagoneer?

Out of 18 Ball Joints for the 1990 Jeep Wagoneer, the most popular in our inventory are:
Ball Joint
from $55.99
(27)
Ball Joint
Suspension Ball Joint Kits
Ball Joint
from $45.99
(10)
Ball Joint
Suspension Ball Joint Kits
Suspension Ball Joint Kit
from $39.99
(1)
Suspension Ball Joint Kit
Suspension Ball Joint Kits