1990 Jeep Grand Wagoneer Drive Shafts and Axles

More 1990 Jeep Grand Wagoneer Drive Shafts and Axles

Find your specific 1990 Jeep Grand Wagoneer original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1990 Jeep Grand Wagoneer Drive Shafts and Axles

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

(2 reviews)
View Product

Spicer – Universal Joint (Part No.5-760X)

Universal Joint

from

$51.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

(7 reviews)
View Product

Crown Auto Jeep Replacmnt – Used To Convert Dana 35 Strap Type Yoke To U Bolt Style, With Pinion Flange (Part No.D35YOKEUBK)

Used To Convert Dana 35 Strap Type Yoke To U Bolt Style, With Pinion Flange

from

$64.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Convert assembly to strong u-bolt style
  • Designed to work with 3.219″ Wide U-Joints
  • Includes: Yoke, Pinion Seal, U-bolts, and pinion nut
  • Contains all hardware needed for installation
See More
View Product

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size

from

$146.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More
View Product

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-194)

Front Drive Shaft: Greaseable, Adjustable

from

$785.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Dorman – Rear Drive Shaft: Adjustable (Part No.976-019)

Rear Drive Shaft: Adjustable

from

$464.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Yukon Gear – Non-Welded Inner Axle Seal For Late Model 35 (Part No.30096)

Non-Welded Inner Axle Seal For Late Model 35

from

$42.99
Non-welded inner axle seal for late Model 35.Yukon Mighty seal.

Product Features:
  • Inner axle seal
  • Fits AMC Model 35
See More
View Product

Yukon Gear – Mighty Seal (Part No.30113)

Mighty Seal

from

$21.99
Product Features:
  • Inner front axle seal
  • Fits Dana Spicer 30 with vacuum disconnect eliminator kit with 30 spline upgrade
See More
View Product

Crown Auto Jeep Replacmnt – Black (Part No.83503063)

Black

from

$6.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More
View Product

Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)

Dana 20 / 44 Axle Bearing And Seal Kit Replacement

from

$123.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
  • Includes axle bearing and seal
  • Services one side
See More
View Product

FAG US – WHEEL BEARING (Part No.KT10)

WHEEL BEARING

from

$70.99
WHEEL BEARING
View Product

National – Shaft Repair Sleeve (Part No.99128)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More
View Product

Yukon Gear – Axle Bearing Retainer Plate For Ya D75786-1X & Ya D75786-2X (Part No.33470)

Axle Bearing Retainer Plate For Ya D75786-1X & Ya D75786-2X

from

$17.99
Product Features:
  • Bearing retainer
  • Fits Yukon axle part numbers YA D75786-1X and YA D75786-2X
See More
View Product

Yukon Gear – Axle Bearing Retainer Plate For Dana 44 TJ Rear (Part No.33472)

Axle Bearing Retainer Plate For Dana 44 TJ Rear

from

$19.99
Product Features:
  • Axle bearing retainer for Jeep TJ rear with Dana Spicer 44
  • 3/8″ bolt holes
  • 1 5/8öx3 3/16ö bolt pattern
See More
View Product

Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)

Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia - Knurl

from

$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

Product Features:
  • Axle stud for AMC Model 20 and Model 35
  • 1/2″ x 20 thread
  • 0.620″ knurl diameter
  • 1.625″ long
See More
View Product

Yukon Gear – Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5" (Part No.33180)

Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5"

from

$5.99
Model 35 & other screw-inaxle stud, 1/2″ -20 x 1.5″.

Product Features:
  • Screw in axle stud for AMC Model 35
  • 1/2″ x 20 thread
  • 1.5″ long
See More
View Product

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More
View Product

Yukon Gear – Inner Axle Dust Shield For Dana 30 (Part No.33442)

Inner Axle Dust Shield For Dana 30

from

$8.99
Product Features:
  • Inner axle dust shield
  • Fits Dana Spicer 30
See More
View Product

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More
View Product

Yukon Gear – Intermediate Shaft Bushing For Disconnect Dana 30 & 44 (Part No.18060)

Intermediate Shaft Bushing For Disconnect Dana 30 & 44

from

$21.99
Product Features:
  • Intermediate shaft bushing
  • Fits Dana Spicer 30 and 44 with disconnect axles
See More
View Product

USA Industries – Constant Velocity Axle Assembly (Part No.AX-9371)

Constant Velocity Axle Assembly

from

$40.49
Precision-machined components reduce noise and provide maximum torque to the wheels.
See More

(2 reviews)
View Product

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82505)

CV Axle Shaft Assembly

from

$106.99
Carquest CV Axle’s are made from the finest materials using premium steel, boot, and grease. Carquest CV Axles are designed to exceed the original equipment specifications for a trouble free ride.High moly CV joint grease with stainless-steel boot bands
See More

(12 reviews)
View Product

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV545841)

CV Axle Shaft Assembly

from

$188.99
All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.High moly CV joint grease with stainless-steel boot bands
See More

(4 reviews)
View Product

USA Industries – Constant Velocity Axle Assembly (Part No.AX-9370)

Constant Velocity Axle Assembly

from

$39.99
Precision-machined components reduce noise and provide maximum torque to the wheels.
See More

(2 reviews)
View Product

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More
View Product

1990 Jeep Grand Wagoneer Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1990 Jeep Grand Wagoneer. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 41 different Drive Shafts and Axles in our inventory ranging from $5.99 to $883.99. That means you can find the exact parts or products you need to keep that 1990 Jeep Grand Wagoneer running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Jeep Grand Wagoneer. Spicer, National, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1990 Jeep Grand Wagoneer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 42 reviews in this category, some of the top rated parts include Wheel Lug Stud with 3.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1990 Jeep Grand Wagoneer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1990 Jeep Grand Wagoneer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Jeep Grand Wagoneer demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Grand Wagoneer the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1990 Jeep Grand Wagoneer, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $35.99
(2)
Universal Joint
Axle Shaft Universal Joints

Top 1990 Jeep Grand Wagoneer Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1990 Jeep Grand Wagoneer. Popular National parts include:
Multi Purpose Seal
from $14.99
(20)
Multi Purpose Seal
Axle Shaft Seals

FAQs for 1990 Jeep Grand Wagoneer Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1990 Jeep Grand Wagoneer?

Out of 41 Drive Shafts and Axles for the 1990 Jeep Grand Wagoneer, the most popular in our inventory are:
CV Axle Shaft Assembly
from $106.99
(12)
CV Axle Shaft Assembly
Drive Shaft and Axles
Drive Shaft Pinion Yoke
from $117.99
This product is not rated
Drive Shaft Pinion Yoke
Drive Shaft Slip Yoke Sleeves
Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal Replacement
from $13.99
This product is not rated
Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal Replacement
Axle Shaft Seals

What are the top-rated 1990 Jeep Grand Wagoneer Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1990 Jeep Grand Wagoneer based on customer reviews/ratings are:
Wheel Lug Stud
from $7.99
(1)
Wheel Lug Stud
“These are SCREW in design (even though the image shows press) not entirely sure how they “fit” my 2016 JKU Rubicon since my factory and Yukon after ma”

More Popular Parts for All Makes