1990 Jeep Cherokee Towing Products
Find Your Specific 1990 Jeep Cherokee Towing Products
Below you will find various in-demand Jeep Towing Products, components and accessories for your 1990 Cherokee. Advance Auto Parts has popular Cherokee parts like Trailer Wirings, Trailer Hitches, Winches and more. You’ll also find aftermarket and OEM Towing Products for other Cherokee model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 1990 Jeep Cherokee Towing Products below and start saving instantly.
Popular 1990 Jeep Cherokee Towing Products Categories
Essential Towing Products for 1990 Jeep Cherokees
Hopkins – Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A (Part No.46255)
from
$70.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.
Product Features:
See More
Product Features:
- For vehicles equipped with independent bulb turn signals or common bulb systems
- Protects tow vehicle electronics from wiring shorts
- Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
- Powers up to 5.0 amps per output
- Receives power directly from the battery
- Includes vehicle side 4 flat
- Includes dust cover and grease packet to prevent corrosion
- Includes Dust Cover And Grease Packet To Prevent Corrosion
Hopkins – Connector (Part No.46365)
from
$99.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights. The Short-Proof Power Taillight Converter is also a self-resetting power converter that will reset after the short has been fixed in the trailer wiring, providing extra protection for the vehicle wiring.
Product Features:
See More
Product Features:
- For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
- Protects Tow Vehicle Electronics And Itself From Wiring Shorts
- Self-Resetting
- Includes 12 Ga. Power Lead Wire
- Includes Fuse/Fuse Assembly/Splices/Cable Ties
- Powers Up To 8.0 Amps Per Output
- Receives Power Directly From The Battery
- Includes Vehicle Side 4 Flat
- Includes Dust Cover And Grease Packet To Prevent Corrosion
Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)
from
$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.
Product Features:
See More
Product Features:
- 60 in. Long
- Adapts Tow Vehicles Taillight System To The Trailers
- Powers Up To 2.1 Amps Per Output
- Double-Molded Weatherproof Design; Includes Dust Cover
- Corrosion Resistant Terminals
- Includes Splices And Terminal Grease
- Complete With Splices And Circuit Tester
Hopkins – Vehicle Wiring Kit (Part No.42455)
from
$29.99
Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit provides a taillight converter that adapts the vehicles independent lights to the trailers common lights. Required accessories are included to get you towing faster.
Product Features:
See More
Product Features:
- Plug-In Simple® Wiring Kit
- Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
- Includes Vehicle Side 4 Flat
- Corrosion Resistant Terminals
- Impact And Corrosion Resistant
- Includes Dust Cover And Grease Packet To Prevent Corrosion
- Includes Step-By-Step Instructions
Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)
from
$39.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.
Product Features:
See More
Product Features:
- 60 inch length
- Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
- Double-molded weatherproof design
- Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
- Includes 4 wire flat extension
- Includes vehicle side 4 flat
- Includes dust cover and grease packet to prevent corrosion
- Includes Dust Cover And Grease Packet To Prevent Corrosion
Husky Towing – 7-Way Blade And 4-Way Flat, Plug-In Style (Part No.33058)
from
$53.99
Husky Towing Products offers a complete line of hitches, brake assemblies, jacks, sway control solutions, and essential towing accessories. Each Husky product is precision engineered, constructed with durable, quality materials, and is rigorously tested to industry safety standards. Hitches are what Husky does best. From Class III receivers, to 5th wheels, to weight distribution hitches, Husky hitches help keep your towables safe and secure. Husky also offers accessories to accompany your hitch including hitch balls, shanks, locks, and more Electric tongue jacks, electrical and brake products, and cargo carriers are just a few other categories that make any towing experience easier.
Product Features:
See More
Product Features:
- Connects To Your Vehicle OEM Tow Package Connector
- Easy-Open, Weatherproof Lid With Rugged, Oversized Hinge Allows Lid To Open 180 Degrees
- Impact And Corrosion Resistant
- Plug-In Simple(R) , No Cutting, No Splicing, Saves Time
CURT – Dual-Output 6/4-Way Connector (Plugs into USCAR) (Part No.55664)
from
$46.49
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Product Features:
See More
Product Features:
- Plugs into USCAR socket to provide 4-way and 6-way trailer wiring connectors
- Fits USCAR-equipped vehicles with factory tow plugs only
- Simple plug-and-play design eliminates the need for cutting or splicing
- 4-way flat output connects tail lights, brake lights and turn signals
- 6-way round socket adds connection for electric brakes and auxiliary power
- Dust covers included to keep connectors clean when not in use
- Slit loom keeps wires contained and well protected
- Metal bracket securely mounts wiring to the vehicle or trailer hitch
Carquest Premium – Trailer Connector Kit (Part No.TCA1364)
from
$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Trailer Connector Kit (Part No.TCC1189)
from
$106.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Hopkins – 40974, Multi-Tow® Exact Fit OEM replacement 7 Blade and 4 Flat Towing Connector (Part No.40974)
from
$39.99
Tow more than one trailer? This exact OEM replacement Multi-Tow® design features multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing.
Product Features:
See More
Product Features:
- Multi-Tow® provides multiple towing options from one connector
- Plug-In Simple!® Wiring Kit
- Utilizes OEM connectors create an exact fit and maximum weatherproofing
- Impact and corrosion resistant
- Pre-greased terminals for added protection
- Includes Step-By-Step Instructions
Carquest Premium – Trailer Connector Kit (Part No.TCC1251)
from
$78.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Milemarker – Winch Hydraulic Fittings (Part No.35-5020-51)
from
$147.99
For use with 75 Series and HI Series winches.
Product Features:
See More
Product Features:
- Winch Hydraulic Fittings
Husky Towing – Class Iii, Square Tube, 2"Receiver, 4500Lb Weight Carrying/750Lb Tongue, Cs (Part No.69646C)
from
$257.99
Husky offers a full line of unique hitch models to provide a custom fit for nearly every vehicle on the road today. Husky receiver hitches are engineered and rigorously tested to SAE J684 standards for safety. Each hitch is protected inside and out with an industry leading, rust resistant finish.
Product Features:
See More
Product Features:
- Manufactured With A Vehicle Specific Design For A Custom Fit
- Precisely-Welded For Superior Strength And Fit
- Co Cured In A Rust Resistant Liquid Bonderite (R) Coating
- Strengthened With A Welded, Seamless Collar
- Open Back Receiver For Easy Cleaning
CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 35 Mins (Part No.13084)
from
$199.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Cherokee XJ (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Product Features:
See More
Product Features:
- Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
- Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
- Engineered with a vehicle-specific design for a custom fit
- Concealed main body for OE look and seamless integration with the vehicle
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid A-coat, inside and out
- Equipped with an open-back receiver for easy cleaning
- Made in USA (may include imported hardware)
Husky Towing – Class Iii, Square Tube, 2"Receiver, 5000Lb Weight Carrying/ 750Lb Tongue Weight (Part No.69573C)
from
$352.99
Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.
Product Features:
See More
Product Features:
- Manufactured With A Vehicle-Specific Design For A Custom Fit
- Precisely-Welded For Superior Strength And Fit
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened With A Welded, Seamless Collar
- Open-Back Receiver For Easy Cleaning
CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins (Part No.13172)
from
$209.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Cherokee KL (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 750 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Product Features:
See More
Product Features:
- Rated to 5,000 lbs. gross trailer weight and 750 lbs. tongue weight
- Compatible with weight distribution hitch (6,000 lbs. WD / 750 lbs. WDTW)
- Engineered with a vehicle-specific design for a custom fit
- Concealed main body for OE look and seamless integration with the vehicle
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid A-coat, inside and out
- Equipped with an open-back receiver for easy cleaning
- Made in USA (may include imported hardware)
CURT – Front Mount Hitch with 2in. Receiver (Part No.31084)
from
$156.99
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,000 lbs. GTW and 300 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Jeep Cherokee, Comanche and Wagoneer (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Product Features:
See More
Product Features:
- Rated to 3,000 lbs. gross trailer weight and 300 lbs. tongue weight
- Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
- Made with a vehicle-specific design for a custom fit
- Provides a convenient mount for hitch accessories
- Ideal for attaching a snow plow, cargo carrier or other front hitch mount
- Allows for easy maneuvering of a trailer into a tight spot
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 35 Mins (Part No.13160)
from
$271.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Cherokee XJ (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Product Features:
See More
Product Features:
- Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
- Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
- Engineered with a vehicle-specific design for a custom fit
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid A-coat, inside and out
- Equipped with an open-back receiver for easy cleaning
- Made in USA (may include imported hardware)
Upgrade your 1990 Jeep Cherokee with Top-Quality Towing Products
When it comes to maintaining or upgrading your 1990 Jeep Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Towing Products are key to keeping your Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Towing Products for the 1990 Jeep Cherokee, designed to meet your needs without breaking the bank.
From
Trailer Wiring
replacements to
Trailer Hitches
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Towing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Towing Products for your 1990 Jeep Cherokee at great prices.
Our Towing Products inventory for this model
ranges from just $18.79 to $271.99, with
an average price of $131.57.
Our 7 Towing Products in stock come from 4 trusted brands, so you’re sure to find the right part for your 1990 Jeep Cherokee without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Jeep Cherokee, we stock popular OEM and aftermarket Towing Products from top names
like Hopkins CURT, and more.
Hopkins Towing Products
start at just $18.79 and boast an impressive 4 stars average rating from customers.
With 108 customer reviews and counting, our 1990 Jeep Cherokee Towing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Towing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1990 Jeep Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Cherokee in top shape, all in one place.
Start shopping confidently below for your 1990 Jeep Cherokee!
Best-Selling Trailer Wiring for 1990 Jeep Cherokees
Enhance the driving experience in your Jeep with 2 quality Trailer Wiring components, starting at $39.99.
Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)
from
$39.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.
Product Features:
See More
Product Features:
- 60 inch length
- Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
- Double-molded weatherproof design
- Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
- Includes 4 wire flat extension
- Includes vehicle side 4 flat
- Includes dust cover and grease packet to prevent corrosion
- Includes Dust Cover And Grease Packet To Prevent Corrosion
Carquest Premium – Trailer Connector Kit (Part No.TCC1276)
from
$87.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Most Popular 1990 Jeep Cherokee Trailer Hitches
Customize your Jeep with 4 Trailer Hitches products
like Trailer Hitch – Class I,
Trailer Hitch – Class II, and
Trailer Wire Converters, all
priced under $271.99.
CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 35 Mins (Part No.13160)
from
$271.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Cherokee XJ (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Product Features:
See More
Product Features:
- Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
- Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
- Engineered with a vehicle-specific design for a custom fit
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid A-coat, inside and out
- Equipped with an open-back receiver for easy cleaning
- Made in USA (may include imported hardware)
CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 35 Mins (Part No.13084)
from
$199.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Cherokee XJ (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Product Features:
See More
Product Features:
- Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
- Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
- Engineered with a vehicle-specific design for a custom fit
- Concealed main body for OE look and seamless integration with the vehicle
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid A-coat, inside and out
- Equipped with an open-back receiver for easy cleaning
- Made in USA (may include imported hardware)
Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)
from
$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.
Product Features:
See More
Product Features:
- 60 in. Long
- Adapts Tow Vehicles Taillight System To The Trailers
- Powers Up To 2.1 Amps Per Output
- Double-Molded Weatherproof Design; Includes Dust Cover
- Corrosion Resistant Terminals
- Includes Splices And Terminal Grease
- Complete With Splices And Circuit Tester
CURT – Front Mount Hitch with 2in. Receiver (Part No.31084)
from
$156.99
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,000 lbs. GTW and 300 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Jeep Cherokee, Comanche and Wagoneer (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Product Features:
See More
Product Features:
- Rated to 3,000 lbs. gross trailer weight and 300 lbs. tongue weight
- Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
- Made with a vehicle-specific design for a custom fit
- Provides a convenient mount for hitch accessories
- Ideal for attaching a snow plow, cargo carrier or other front hitch mount
- Allows for easy maneuvering of a trailer into a tight spot
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
Top Picks for 1990 Jeep Cherokee Winches
Upgrade Jeep Cherokees with top-quality Winches parts, including 1 OEM and aftermarket selections for your 1990 model.
Milemarker – Winch Hydraulic Fittings (Part No.35-5020-51)
from
$147.99
For use with 75 Series and HI Series winches.
Product Features:
See More
Product Features:
- Winch Hydraulic Fittings
Top-Rated Towing Products Brands For Your 1990 Jeep Cherokee
Shop for the best-rated brands offering Towing Products and other products for your 1990 Jeep Cherokees. Below you’ll find some of our best rated Towing Products from Hopkins and CURT, and more. Towing Products from these brands that fit a 1990 Cherokee start at just $18.79 and are rated as high as 4 stars. OEM and aftermarket Towing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Hopkins 1990 Jeep Cherokee Towing Products
When it comes to maintaining or upgrading your 1990 Jeep Cherokee, using quality Towing Products is essential to ensure durability and a perfect fit. Hopkins ticks all of those boxes. We offer a wide selection of Hopkins Towing Products, specifically designed for the 1990 Jeep Cherokee. With over 2 Hopkins brand Towing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.79, with an average price of just $29.39. Plus, with over 16 customer reviews and an average rating of 4 stars, you can trust that our Hopkins Towing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$39.99
$39.99
(16)
46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)
“The splice connectors were better than expected, easy to use. Love the included tester, takes guess work out of it. Made for an easy install and every”
Popular CURT 1990 Jeep Cherokee Towing Products
CURT auto parts is one of the highest quality Towing Product brands in the market. Any 1990 Jeep Cherokee owner should feel confident when installing genuine CURT parts in their vehicle. To ensure the best fit and performance for your 1990 Cherokee, Advance Auto Parts carries a full inventory of 3 CURT Towing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these CURT Towing Products range from $156.99 to $271.99, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Towing Products below will deliver on both quality and value.
from
$199.99
$199.99
This product is not rated
Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 35 Mins
“”
from
$271.99
$271.99
(2)
Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 35 Mins
“Installed on my 1999 Jeep Cherokee Sport in 2 hours. Required some elbow grease, but that’s the way is goes. It looks very good.”
FAQs for 1990 Jeep Cherokee Towing Products
Which Towing Products are best-sellers for 1990 Jeep Cherokees?
Out of 7 Towing Products that fit 1990 Jeep Cherokees, the following parts are the top sellers:
- Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 35 Mins (22010700) – $199.99
- LITE MATE 3-2 CONVTR (89013192) – $18.79
- Winch Hydraulic Fittings (99994541) – $147.99
What’s the price range for 1990 Jeep Cherokee Towing Products?
Towing Product prices for the 1990 Jeep Cherokee start at $18.79 and go up to $271.99 for the most premium parts.
What’s the average price of a Towing Product for a 1990 Jeep Cherokee?
The average price for Towing Products for the 1990 Jeep Cherokee is $131.57. Keep in mind the variety of part types within our Towing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Towing Products for other Jeep Cherokee model years?
What are the cheapest Towing Products for my 1990 Jeep Cherokee?
The cheapest 1990 Jeep Cherokee Towing Products we carry in stock are:
- LITE MATE 3-2 CONVTR (89013192) – $18.79
- 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (6253512) – $39.99
- Trailer Connector Kit (12541429) – $87.99
- Winch Hydraulic Fittings (99994541) – $147.99
- Front Mount Hitch with 2in. Receiver (10159098) – $156.99
What are the top-rated Towing Products that fit the 1990 Jeep Cherokee?
Out of 108 reviews by customers, our 1990 Jeep Cherokee Towing Products have an average customer rating of . These are some of the highest-rated Towing Product types for the 1990 Jeep Cherokee and their top-rated products:
- Trailer Wiring
- Trailer Hitches
What types of Towing Products do you sell for my 1990 Jeep Cherokee?
As of 2/5/25, these are some of the most in-demand types of Towing Products for a 1990 Jeep Cherokee:
Can I get help with 1990 Jeep Cherokee Towing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Towing Products and more.
What is your return policy for Jeep Cherokee Towing Products?
Advance Auto Parts keeps returns simple. For new Jeep Cherokee Towing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
