1990 Jaguar XJS Motor Oil

Essential 1990 Jaguar XJS Motor Oil

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 1 Quart (Part No.797976)

High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 1 Quart

from

$9.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:
  • Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
  • Refresh aging seals and prevent leaks with seal conditioners
  • Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
  • Enhanced friction performance helps maximize power with advanced friction-fighting agents
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
  • MaxLife High Mileage Synthetic Blend Engine Oil is specially designed for engines with over 75,000 miles, providing greater protection and maximizing engine life.
See More

Castrol – EDGE 10W-30 Full Synthetic Motor Oil, 5 Quart (Part No.1598B6)

EDGE 10W-30 Full Synthetic Motor Oil, 5 Quart

from

$37.99
Castrol EDGE 10W-30 Full Synthetic Motor Oil is Castrol’s strongest oil, ideal for drivers seeking the best in sludge protection, wear protection, and maximum engine performance. This oil is 3X stronger against viscosity breakdown than the leading full synthetic, 10X better in high-temperature performance, and offers 6X better wear protection. It meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M, and 4718M standards, and fulfills the engine test requirements of Chrysler MS 6395, ensuring top-tier performance and reliability. Unlock maximum performance with every drive.

Product Features:
  • 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
  • 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
  • 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
  • Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395
  • Advanced Fluid TITANIUM Technology: Incorporates Fluid TITANIUM Technology, making it Castrol’s strongest oil for drivers who demand the best in sludge protection, wear protection, and maximum engine performance.
See More

Castrol – EDGE Extended Performance 5W-20 Advanced Full Synthetic Motor Oil: 5 Qt (Part No.1598EF)

EDGE Extended Performance 5W-20 Advanced Full Synthetic Motor Oil: 5 Qt

from

$41.99
Castrol EDGE Extended Performance with Fluid TITANIUM Technology is Castrol’s most advanced full synthetic and the natural choice for drivers who demand outstanding performance and the assurance of protection during today’s longer drain intervals. It provides protection for 20,000 miles or a full year – guaranteed. Castrol EDGE Extended Performance features some of the best attributes of Castrol’s patented Fluid TITANIUM Technology that transforms its structure to be stronger under pressure. It helps keep metal apart to fight power-robbing friction, providing wear protection 6X better than required by the industry standard, while protecting under extreme conditions with 10X better high temperature performance.  Castrol EDGE Extended Performance provides the strength to extend drains for 20,000 miles and the muscle to maintain viscosity stability under the extreme force of the engine and protection from wear.  Unlock maximum engine performance.

Product Features:
  • Extended drain interval of 20,000 miles or a full year (Whichever comes first)
  • 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
  • 6X Better Wear Protection (As measured in the latest Sequence IVA engine test)
  • 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
See More

Castrol – EDGE SUPERCAR 10W-60 Full Synthetic Motor Oil, 1 Liter (Part No.15A4E6)

EDGE SUPERCAR 10W-60 Full Synthetic Motor Oil, 1 Liter

from

$15.99
Castrol EDGE SUPERCAR 10W-60 Full Synthetic Motor Oil is for drivers who demand maximum engine performance. This advanced full synthetic oil with Fluid Titanium Technology transforms to be strongest when engine pressure is most severe, reducing power-robbing friction across engine speeds and conditions. Recommended by world-leading car manufacturers, it meets or exceeds industry standards such as API CF/SN and ACEA A3/B4, and is approved for BMW M-models and VW 501 01/505 00. Trusted to perform in high-performance vehicles like the Aston Martin V8 Vantage S, Audi R8 V10 GT, Bugatti Chiron, Ferrari F12 Berlinetta, and Koenigsegg engines, it is the ultimate engine oil to unlock exhilarating performance with every drive.

Product Features:
  • Transforms to be stongest when engine pressure is most severe
  • Reduces power robbing friction across engine speeds and conditions
  • Recommended by world leading car manufacturers
  • Meets API CF/SN, ACEA A3/B4, Approved for BMW M-models, VW 501 01/505 00
  • MEETS OR EXCEEDS INDUSTRY STANDARDS: ACEA A3/B3, A3/B4; API SN/CF; Approved for VW 501 01/ 505 00
  • TRUSTED TO PERFORM: Approved for BMW M-Models, Approved for use in Koenigsegg engines, Suitable for use in Aston Martin V8 Vantage S, Audi R8 V10 GT, Bugatti Chiron, Bugatti Veyron, Ferrari F12 Berlinetta, Ferrari FF, and Koenigsegg engines.
  • Full Synthetic Composition: Provides superior protection and performance with a 10W-60 SAE oil weight, ideal for demanding driving conditions.
See More

Castrol – GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: 5 Quart (Part No.15A66D)

GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: 5 Quart

from

$29.99
Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways* and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:
  • 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Premium-quality base oils and anti-wear additives that help extend the life of your engine
  • Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
  • Versatile Grade Options: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean offers flexibility to suit various engine requirements.
  • Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
  • Synthetic Blend Composition: The GTX Ultraclean 5W-30 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.
See More

FRAM – 10W40 Conventional Motor Oil, with Low-Speed Pre-Ignition Control, 1 Quart (Part No.F640)

10W40 Conventional Motor Oil, with Low-Speed Pre-Ignition Control, 1 Quart

from

$6.49
FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robust  additive system to provide reliable engine protection across a broad range of operating  conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine  designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to prevent  low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and  shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets the  requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Motor Oil: Maximize Engine Life, 5 Quart (Part No.779462)

High Mileage with MaxLife Technology Synthetic Blend 10W-30 Motor Oil: Maximize Engine Life, 5 Quart

from

$31.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:
  • MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
  • REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
  • REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
  • ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
  • MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
  • MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
  • Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.
See More

FRAM – Conventional 20W50 Engine Oil – Low-Speed Pre-Ignition Control – 5 Qt (Part No.F650-5QT)

Conventional 20W50 Engine Oil - Low-Speed Pre-Ignition Control - 5 Qt

from

$25.99
FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional 20W50 5 QT utilizes a blend of high-quality conventional base stocks and a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 1 Quart (Part No.F670)

10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 1 Quart

from

$6.49
FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Sludge Cleanup: Formulated to help clean out sludge buildup, keeping engines running clean and with increased efficiency and power.
  • Versatile Compatibility: Suitable for gasoline and light-duty diesel engines, including turbocharged and supercharged engines.
  • Meets Industry Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.
See More

Castrol – EDGE Euro Car 5W-30 C3 Full Synthetic Engine Oil 1 Quart (Part No.154BC4)

EDGE Euro Car 5W-30 C3 Full Synthetic Engine Oil 1 Quart

from

$12.49
CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1-quart container.

Product Features:
  • Optimized to deliver 40% better performance than required by acea standards
  • Recommended by world leading auto manufacturers
  • Engine protection for the entire drain interval even under extreme pressure of high output engines
  • Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
  • Formerly known as castrol slx
  • Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.
See More

FRAM – Conventional 5W20 Engine Oil, with Low-Speed Pre-Ignition Control 1 Quart (Part No.F610)

Conventional 5W20 Engine Oil, with Low-Speed Pre-Ignition Control 1 Quart

from

$6.49
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W20 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

Valvoline – Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart (Part No.VV935)

Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart

from

$11.49
Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:
  • ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
  • 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
  • 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
  • EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
  • MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
  • Enhanced Oil Stability: This motor oil resists oil breakdown 10 times better than industry standards, providing consistent performance and reliability.
  • Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents to maintain engine health and efficiency.
See More

Valvoline – High Mileage with MaxLife Technology SAE 10W-40 Synthetic Blend Engine Oil, 5 Quart (Part No.881148)

High Mileage with MaxLife Technology SAE 10W-40 Synthetic Blend Engine Oil, 5 Quart

from

$29.99
Valvoline High Mileage with MaxLife Technology SAE 10W-40 Synthetic Blend Motor Oil is a premium quality engine oil designed to provide superior protection for high mileage engines. This synthetic blend motor oil is formulated with MaxLife Technology that helps to reduce engine wear, prevent leaks, and keep the engine clean. It is specially designed for engines with over 75,000 miles and provides excellent protection against sludge and other harmful deposits. The 5-quart container is perfect for topping off or complete oil changes. Valvoline High Mileage with MaxLife Technology SAE 10W-40 Synthetic Blend Motor Oil is a reliable choice for drivers who want to extend the life of their high mileage engines.

Product Features:
  • Enhanced anti-wear additives deliver a thick & durable layer of anti-wear film to help prevent auto engine breakdown
  • Added detergents protect against engine-clogging sludge and deposits
  • Premium seal conditioners help treat and prevent leaks
  • Superior antioxidants resist engine oil breakdown in extreme conditions
  • Protects gasoline direct injected engines from low-speed pre-ignition
  • EZ Pour design incorporates a centralized handle, easy-pull tab, anti-glug tube and precision pour spout to make changing your oil faster, easier and cleaner than ever before
  • Maximizes the life of engines over 75,000 miles
See More

Castrol – GTX High Mileage Synthetic Blend 5W-30 Engine Oil: Helps Protect Emission Systems, 1 Quart (Part No.149D6A)

GTX High Mileage Synthetic Blend 5W-30 Engine Oil: Helps Protect Emission Systems, 1 Quart

from

$10.49
Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:
  • Phosphorus replacement technology to help extend the life of the emission system
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
  • Seal conditioners to help reduce leaks
  • Advanced additives that minimize engine wear
  • Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
  • Meets or exceeds api sp/sn plus/sn, ilsac gf-6 and latest ford specs
See More

Castrol – 5W-30 Full Synthetic Motor Oil, Helps Maximize Engine Performance, 1 Quart (Part No.15D452)

5W-30 Full Synthetic Motor Oil, Helps Maximize Engine Performance, 1 Quart

from

$11.99
Castrol Full Synthetic 5W-30 Engine Oil is expertly formulated for highly tuned four-cylinder and latest technology engines that operate at higher temperatures. This full synthetic oil, classified as standard with an SAE oil weight of 5W-30, ensures exceptional lubrication for all engine components, from the valve train to the bearings, providing the strength needed for maximum engine performance.

Product Features:
  • Expertly formulated for highly tuned four-cylinder and latest technology engines that operate at higher temperatures.
  • Full synthetic composition ensures exceptional lubrication for all engine components, from the valve train to the bearings.
  • Classified as standard with an SAE oil weight of 5W-30, providing the strength needed for maximum engine performance.
  • Helps maximize engine performance by maintaining optimal lubrication under high-temperature conditions.
  • Comes in a convenient 1 QT size, perfect for top-offs or completing oil changes.
See More

FRAM – High Milage Conventional 5W30 Engine Oil – Helps Restore Seal Condition – 1 Qt (Part No.F660)

High Milage Conventional 5W30 Engine Oil - Helps Restore Seal Condition - 1 Qt

from

$6.49
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
See More

FRAM – 10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart (Part No.F630)

10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart

from

$6.49
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-Speed Pre-Ignition Control
  • Chain Wear Protection
  • Piston Cleanliness
  • Turbo-Compatibility
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
  • High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
  • Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
  • SAE oil weight of 10W-30, making it a dependable choice for various engine types.
See More

FRAM – 10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart (Part No.464-32)

10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

from

$7.29
10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

Castrol – 1 Qt Full Synthetic 5W-20 Engine Oil – 3X Stronger Against Viscosity Breakdown (Part No.15B743)

1 Qt Full Synthetic 5W-20 Engine Oil - 3X Stronger Against Viscosity Breakdown

from

$9.99
Castrol Ultraclean synthetic blend engine oil is our cleanest GTX ever. Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to the buildup of sludge that can reduce engine life, power and fuel economy. Castrol Ultraclean has a double-action formula proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation from occurring. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard (as measured in the Sequence VH Sludge test vs. API SP test limits). No other oil keeps engines cleaner.

Product Features:
  • Premium-quality base oils and anti-wear additives that help extend the life of your engine
  • 1.4x superior sludge protection compared to tough industry standards, as measured in the sequence vh sludge test vs. api sp test limits
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Meets or exceeds api sp/sn plus/sn, ilsac gf-6 and latest ford specs
  • Unsurpassed thermal breakdown protection: GTX Engine Oil, 5W-20 provides superior protection against thermal breakdown, ensuring that your engine stays protected even under extreme temperatures.
See More

Valvoline – Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 5 Quart (Part No.881165)

Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 5 Quart

from

$36.99
Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:
  • ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
  • 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
  • 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
  • EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
  • MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
  • Enhanced Oil Stability: Resists oil breakdown 10-times better than industry standards, providing consistent performance and reliability.
  • Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.
See More

Castrol – GTX High Mileage Synthetic Blend 5W-20 Motor Oil: Helps Protect Emission Systems, 1 Quart (Part No.15B6E6)

GTX High Mileage Synthetic Blend 5W-20 Motor Oil: Helps Protect Emission Systems, 1 Quart

from

$10.49
Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:
  • Phosphorus Replacement Technology to help extend the life of the emission system
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
  • Seal conditioners to help reduce leaks
  • Advanced additives that minimize engine wear
  • Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
  • Meets or exceeds API SP/SN PLUS/SN, ILSAC GF-6 and latest Ford specs
  • Synthetic Blend Composition: Combines the benefits of synthetic and conventional oils to provide superior protection against sludge, wear, and burn-off, extending the life of your high mileage engine.
  • High Mileage Engine Care: Designed for vehicles with high mileage, offering enhanced protection to keep your engine running smoothly and efficiently.
  • Optimal Viscosity: With an SAE oil weight of 5W-20, this motor oil ensures optimal performance and protection in a wide range of temperatures and driving conditions.
See More

Castrol – EDGE 5W-50 Full Synthetic Motor Oil, Max Performance, 1 Quart (Part No.152C6F)

EDGE 5W-50 Full Synthetic Motor Oil, Max Performance, 1 Quart

from

$11.99
Castrol EDGE 5W-50 Full Synthetic Motor Oil is Castrol’s strongest oil, designed for drivers seeking the ultimate in sludge protection, wear protection, and engine performance. This oil is 3X stronger against viscosity breakdown than the leading full synthetic, offers 10X better high-temperature performance, and provides 6X better wear protection. Meeting API SP/SN PLUS standards, it ensures your engine runs smoothly and efficiently, making it the natural choice for those who demand the best.

Product Features:
  • 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
  • 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
  • 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
  • Meets API SP/SN PLUS
  • Ultimate Sludge Protection: Castrol EDGE 5W-50 with Fluid TITANIUM Technology offers superior sludge protection, ensuring your engine stays clean and efficient.
See More

FRAM – 5W-20 Full Synthetic Motor Oil, Extends Full Synthetic Motor Life, 1 Quart (Part No.F920)

5W-20 Full Synthetic Motor Oil, Extends Full Synthetic Motor Life, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos®1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-20 and is a fully licensed GM dexos®1 Gen 2 motor oil.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ, GM dexos«1 Gen 2, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
  • Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
  • Fully Licensed GM dexos«1 Gen 2: This oil is fully licensed as GM dexos«1 Gen 2 motor oil, ensuring it meets the high standards required by General Motors for optimal engine performance.
See More

Castrol – EDGE Euro Car 0W-30 A3/B4 Full Synthetic Engine Oil 1 Quart (Part No.152B99)

EDGE Euro Car 0W-30 A3/B4 Full Synthetic Engine Oil 1 Quart

from

$11.99
CASTROL EDGE Euro Car 0W-30 A3/B4 Full Synthetic Motor Oil 1 Quart is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to meet the European OEM gasoline specifications for Mercedes-Benz and VW/Audi. It is optimized to deliver 40% better performance than other synthetic oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SL, ACEA A3/B4, MB Approval 229.3, and VW 502 00/505 00 specifications. With its unique formulation, Castrol EDGE Euro Car 0W-30 A3/B4 Full Synthetic Motor Oil transforms under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance.

Product Features:
  • Optimized to deliver 40% better performance than required by acea standards
  • Recommended by world leading auto manufacturers
  • Engine protection for the entire drain interval even under extreme pressure of high output engines
  • Meets api cf/sl, acea a3/b4, mb approval 229.3/229.5, vw 502 00/505 00
  • SYNTEC Technology: The reformulated EDGE Engine Oil features SYNTEC Technology, which enhances its performance and provides even better protection for your engine.
  • Full Synthetic Composition: The EDGE Engine Oil is composed of full synthetic oil, which provides superior protection against engine wear and tear, and helps to extend the life of your engine.
See More

Castrol – EDGE 5W-20 Advanced Full Synthetic Motor Oil: 5 Quart (Part No.15B9AD)

EDGE 5W-20 Advanced Full Synthetic Motor Oil: 5 Quart

from

$37.99
Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:
  • 3X Stronger against viscosity breakdown than leading full synthetic (Based on Kurt Orbahn test in 5W-30 grade)
  • 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
  • 6X Better Wear Protection
  • 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
  • Advanced Fluid TITANIUM Technology: Castrol EDGE with Fluid TITANIUM Technology transforms its structure under pressure to keep metal parts apart and reduce friction, ensuring maximum engine performance.
  • Full Synthetic Composition: As a full synthetic motor oil, Castrol EDGE 5W-20 offers enhanced performance and protection compared to conventional oils.
  • Optimal for Modern Engines: Designed to meet the demands of today’s smaller, more powerful engines, ensuring they run smoothly and efficiently under intense conditions.
See More

Quaker State – Full Synthetic 10W-30 Motor Oil 1 Quart (Part No.550046199)

Full Synthetic 10W-30 Motor Oil 1 Quart

from

$8.49
Quaker State Full Synthetic 10W-30 motor oil delivers strong engine performance and protection against deposits between oil changes. It’s designed to protect today’s sophisticated engines, including modern turbocharged engines. Quaker State Full Synthetic motor oil is the best of the Quaker State portfolio. It can be used in both new and older vehicles, especially high performance vehicles such as sports cars, SUVs, trucks, and minivans. Additionally, Quaker State Full Synthetic 10W-30 is compatible with biofuels ranging from E10 to E85 and is suitable for hybrid engines. It provides high resistance to oxidation, keeping the oil fresher for longer, and it reduces friction to maximize horsepower in your vehicle (compared to Quaker State conventional and synthetic blend motor oils). It exceeds the requirements of the following industry specifications: API SP-Resource Conserving and all previous categories; ILSAC GF-6a and all previous ILSAC Standards. Quaker State Full Synthetic 10W-30 motor oil meets the specifications for: Chrysler MS-6395; GM 6094M. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:
  • Full synthetic 10W-30 motor oil provides strong engine performance and protection against deposits between oil changes
  • Provides improved fuel economy (based on the latest industry standard)
  • Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
  • Formulated with high resistance to oxidation, keeping the oil fresher for longer.
  • Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
  • Maintains required viscosity from start to finish, providing optimal protection
  • Suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.
  • Compatible with biofuels ranging from E10 to E85 and suitable for hybrid vehicles.
See More

Castrol – EDGE 5W-20 Full Synthetic Engine Oil 1 Quart (Part No.152C82)

EDGE 5W-20 Full Synthetic Engine Oil 1 Quart

from

$11.99
CASTROL EDGE 5W-20 Full Synthetic Motor Oil 1 Quart is the perfect choice for drivers who want the best engine performance. This oil is Castrol’s strongest oil, formulated with Fluid TITANIUM Technology, which provides maximum sludge protection, wear protection, and engine performance. It is 3X stronger against viscosity breakdown than traditional oils, 10X better in high-temperature performance, and 6X better in wear protection. This oil meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, and other industry standards. It is a full synthetic oil with an SAE weight of 5W-20, which means it is suitable for use in most modern engines. With Castrol EDGE, you can unlock maximum performance with every drive.

Product Features:
  • 3x stronger against viscosity breakdown than the leading full synthetic – based on kurt orbahn test in 5W-30 grade
  • 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
  • 6x better wear protection – as measured in seq iva test vs. latest test limit
  • Meets api sp/sn plus, ilsac gf-6, acea a1/b1, acea c5, gm dexos1 gen 2, meets ford wss-m2c960-a1 and wss-m2c945-b1, meets engine test requirements of chrysler ms 6395
  • Syntec Power Technology: The reformulated EDGE Engine Oil with Syntec Power Technology provides even better performance, making it the perfect choice for drivers who demand the best from their engines.
  • Full Synthetic Oil Composition: The oil composition of EDGE Engine Oil is full synthetic, providing superior protection against sludge buildup and wear, ensuring maximum engine performance.
See More

FRAM – 5W20 High Milage Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart (Part No.F662)

5W20 High Milage Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart

from

$6.49
FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Specially formulated for high mileage engines: FRAM High Mileage 5W20 1 QT is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it an ideal choice for vehicles with over 75,000 miles.
See More

1990 Jaguar XJS Motor Oil

Maybe you’re in the middle of a full rebuild of that 1990 Jaguar XJS. Maybe you just need a couple of Motor Oil. Either way, Advance Auto Parts has 72 different Motor Oil in our inventory ranging from $6.49 to $41.99. That means you can find the exact parts or products you need to keep that 1990 Jaguar XJS running smoothly.

Motor Oil are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Jaguar XJS. Castrol, Fram, and Valvoline are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Motor Oil for your 1990 Jaguar XJS, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 23,526 reviews in this category, some of the top rated parts include Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart with 4.9 stars and EDGE 5W-30 Advanced Full Synthetic Motor Oil: 1 Quart with 4.9 stars.

So if you’re in the market for aftermarket Motor Oil to keep your 1990 Jaguar XJS rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Motor Oil Brands To Make Your 1990 Jaguar XJS Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Jaguar XJS demands trusted brand parts and products to keep it running. Many trusted brands of Motor Oil make up Advance Auto Parts’ inventory, and all are ready to help make your XJS the best it can be. Be sure to browse some of our top Motor Oil brands and parts.

Popular Valvoline Motor Oil

We carry Valvoline parts in our stock across Engine Oil categories, plus more. For a 1990 Jaguar XJS, our most popular Valvoline Motor Oil include:

FAQs for 1990 Jaguar XJS Motor Oil

What are the most purchased Motor Oil for the 1990 Jaguar XJS?

Out of 72 Motor Oil for the 1990 Jaguar XJS, the most popular in our inventory are:
Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart
from $27.99
This product is not rated
Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart
Engine Oil

What are the top-rated 1990 Jaguar XJS Motor Oil?

Top-rated Motor Oil for your 1990 Jaguar XJS based on customer reviews/ratings are:
Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart
from $11.49
(690)
Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart
“I have always used Valvoline oil with very good luck so to find it at a very good price that’s great.”
EDGE 5W-30 Advanced Full Synthetic Motor Oil: 1 Quart
from $11.99
(442)
EDGE 5W-30 Advanced Full Synthetic Motor Oil: 1 Quart
“all my cars”