1990 GMC C3500 Differentials

Essential 1990 GMC C3500 Differentials

Yukon Gear – Differential (Part No.26044)

Differential

from

$1119.99
Differential

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Motive Gear – Differential Gear Install Kit (Part No.D70IK)

Differential Gear Install Kit

from

$111.99


Product Features:
  • MINI-INSTLTN KIT-DANA 70
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

from

$5.99
Product Features:
  • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – 4340 Cut To Length Shaft For GM 14T & 11.5", 30 Spline, 34.8"-38.8" (Part No.21717)

4340 Cut To Length Shaft For GM 14T & 11.5", 30 Spline, 34.8"-38.8"

from

$429.99
Yukon 4340 cut to length shaft for GM 14T & 11.5″, 30 spline, 34.8″-38.8″. Yukon 4340 Chrome Moly alloy axles offer a strength increase over stock while retaining a low cost. Yukon 4340 Chrome Moly alloy rear axles come with a limited lifetime warranty against manufacturing defects. Please verify bolt pattern on 2011 & later models. This axle has a 3.562″ bolt pattern. Some late model applcaitons use a larger bolt pattern.

Product Features:
  • Fits GM 10.5″ 14 bolt truck and GM 11.5″
  • 4340 Chromoly
  • 30 spline
  • Cut to length design fits 34.8″-38.8″ applications
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41025)

Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size

from

$271.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a u/bolt style yoke.

Product Features:
  • Fits Dana Spicer 60 and 70
  • 29 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • U-bolt style
See More

Motive Gear – Differential Carrier Bearing Kit – Koyo (Part No.R10.5CK)

Differential Carrier Bearing Kit - Koyo

from

$112.99
Product Features:
  • CARRIER BEARING KIT FORD 10.5″
See More

Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)

Extra-Large Clamshells For Large Applciations

from

$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.

Product Features:
  • Extra Large clamshell
  • Fits carrier bearing puller
See More

Yukon Gear – Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down (Part No.26030)

Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down

from

$1110.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • 4.10 ratio and down only
  • Clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Motive Gear – Differential Mini Spool (Part No.MS10-28)

Differential Mini Spool

from

$98.99


Product Features:
  • MINI SPOOL GM 10 BOLT 8 1/2″ 28 SPLINE
See More

Motive Gear – Differential Crush Sleeve (Part No.26008741)

Differential Crush Sleeve

from

$12.99


Product Features:
  • CRUSH SLEEVE 14 BOLT 10.5 (3124) 1989 UP MIN ORDER 1000
See More

Pro-King – Differential Internal Nest Kit (Part No.718C717B)

Differential Internal Nest Kit

from

$422.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Pro-King – Pinion Seal (Part No.716A070)

Pinion Seal

from

$6.69
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM14BI)

Differential Carrier Gear Kit

from

$266.99


Product Features:
  • GM10.5″ INTERNAL KIT (OPEN) 30 SPL
See More

Pro-King – Differential Bearing Cone (Part No.764A270)

Differential Bearing Cone

from

$35.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Replacement Powr Lok Carrier Case For Dana 70, 4.10 & Down (Part No.20032)

Replacement Powr Lok Carrier Case For Dana 70, 4.10 & Down

from

$869.99
Yukon replacment Powr Lok carrier case for Dana 70, 4.10 & down (incl ABS).

Product Features:
  • Powk Lok positraction carrier case
  • Does not include spider gears
  • Fits Dana Spicer 70
  • 4.10 and down ratio only
  • ABS and non-ABS compatible
See More

Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)

14T Side Gear Thrust Washer

from

$7.99
14T side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)

Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed)

from

$156.99
Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 60 and 70
  • Powr Lok positraction only
See More

Motive Gear – Differential Bearing Kit – Timken (Part No.R14RT)

Differential Bearing Kit - Timken

from

$145.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL GM 14 BLT 10.5″
See More

Yukon Gear – Bearing Race Driver (Part No.56009)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits 382A race
  • All steel construction
See More

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 80 In A 4.88 Ratio (Part No.24324)

High Performance Replacement Ring & Pinion Gear Set For Dana 80 In A 4.88 Ratio

from

$534.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Dana Spicer 80
  • 11.25″ ring gear diameter
  • 37 spline pinion
  • 12 ring gear bolts
  • 4.88 ratio
See More

USA Standard Gear – Master Overhaul Kit for the GM 10.5" 14T Differential, ’89-’98 (Part No.37045)

Master Overhaul Kit for the GM 10.5" 14T Differential, '89-'98

from

$309.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 1989-1997 GM 10.5″ 14 bolt truck
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Pro-King – Differential Pinion Gear Washer (Part No.744A216)

Differential Pinion Gear Washer

from

$3.19
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

1990 GMC C3500 Differentials

Maybe you’re in the middle of a full rebuild of that 1990 GMC C3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 204 different Differentials in our inventory ranging from $1.89 to $1,374.99. That means you can find the exact parts or products you need to keep that 1990 GMC C3500 running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1990 GMC C3500. Valvoline, Driveworks, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1990 GMC C3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,880 reviews in this category, some of the top rated parts include Bearings with 4.3 stars and Taper Bearing Cone with 3.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1990 GMC C3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1990 GMC C3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 GMC C3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1990 GMC C3500 Differentials

What are the most purchased Differentials for the 1990 GMC C3500?

Out of 204 Differentials for the 1990 GMC C3500, the most popular in our inventory are:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Differential Bearings
Differential Cover Gasket
from $6.79
(13)
Differential Cover Gasket
Rear Differential Cover Gaskets
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil

What are the top-rated 1990 GMC C3500 Differentials?

Top-rated Differentials for your 1990 GMC C3500 based on customer reviews/ratings are:
Bearings
from $22.99
(3)
Bearings
“works great !!!”
Taper Bearing Cone
from $17.99
(2)
Taper Bearing Cone
“good deal”
Shaft Repair Sleeve
from $27.49
(1)
Shaft Repair Sleeve
“Perfect Fit. Product was exactly as described”