1990 GMC C1500 Performance and Racing Products

Name: Mr. Gasket Ultra Seal: Competition Screw-In Rocker Arm Studs, 1075
Brand: Mr. Gasket
SKU: 1075
Price: 113.99 USD

Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1990 C1500. Advance Auto Parts has popular C1500 parts like Performance Oil Filters, Performance Ignition Products, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other C1500 model years including 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 and more. Select a category of 1990 GMC C1500 Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1990 GMC C1500 Performance and Racing Products Categories

Performance Oil Filters

Performance Engine Coolant Thermostats

Performance Starters

Performance Intake Manifolds

Performance Mufflers

Performance Coils

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Exhaust Headers

Performance Shifters

Performance Distributors

Performance Valve Covers

Performance Body Mounts

Performance Water Outlet Gaskets

Performance Engine Dress-Up Kits

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Engine Harmonic Balancers

Performance Ignition Modules

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Coil Spring Insulators

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Spark Plug Wires

Performance Chassis Bushing Kits

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Timing Covers and Tabs

Performance Exhaust Tail Pipes

Performance Camshaft and Lifter Kits

Performance Leaf Spring Bushings

Performance Ignition Kits

Performance Valve Cover Hardware

Performance Upper Performance Control Arm Bushings

Performance Engine Rocker Arms

Performance Universal Joints

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Exhaust Pipes

Performance Intake Manifold Hardware

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Engine Main Bearing Gasket Sets

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Oil Filler Caps

Performance Shock Mount Kits

Performance Ball Joint Boots

Performance Engine Timing Cover Gasket Sets

Performance Engine Push Rods

Performance Brake Hose Kits

Nitrous Oxide Injection System Kit

Performance Torque Converters

Performance Transmission Pan

Performance Ignition Systems

Performance Nitrous Systems

Performance Flywheels

Specialty and Racing Shifters

Performance Diesel Fuel Injection Pump

Performance Engine Valve Stem Seal Sets

Performance Transmission Kickdown Cable

Essential Performance and Racing Products for 1990 GMC C1500s

Mr. Gasket Ultra Seal: Competition Screw-In Rocker Arm Studs, 1075

from

$113.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Energy Suspension Ball Joint Dust Boot Set, 9.13126R

from

$10.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex(TM) performance polyurethane for added performance and durability.

Energy Suspension Body Cab Mount Set, 3.4116G

from

$121.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off. And aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Competition Cams XE 224/230 Hydraulic Roller Cam and Lifter Kit, CL11-423-8

from

$1225.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

FEL-PRO Performance Stainless steel core laminate Engine Cylinder Head Gasket, 1047

from

$53.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

NOS/Nitrous Oxide Systems Nitrous Systems-Performance, 02519NOS

from

$1117.99

If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 lb. bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.

Mr. Gasket Intake Manifold Bolt Set - Socket Head, 956G

from

$21.49

These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers.

"MSD Ignition Distributor Gear, Chevy Distributor, 0.500"" Id, Iron, 8531"

from

$62.99

MSD Ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. MSD engineers have built test fixtures and spent hundreds of hours testing and evaluating the metallurgy of our gears. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance.

Mr. Gasket Thermocap Radiator Cap, 2470R

from

$58.99

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Competition Cams Magnum/Oval Track 244/244 Hydraulic Flat Cam, 11-213-3

from

$297.99

HYDRAULIC – Magnum: Street/strip applications. 10:1+ compression, 3000+ stall or 4 speed. 4.10 or lower gears and aftermarket intake. Very rough idle. OR Oval Track: Good for hobby stock in 454 where hydraulic lifters must be used.

from

$37.09

If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Made from Nitrile rubber.

from

$259.99

Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Mr. Gasket High Performance Thermostat - 160 Degree Brass & Copper, 4363

from

$31.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

B & M Flexplate For 168 Tooth 454 Cid, 20233

from

$192.99

As performance levels increase, an O.E. style flex plate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flex plate designed for 1965-1990 Chevrolet big block 454ci (externally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5-inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

B & M Automatic Shifter - Z-Gate - Universal, 80681

from

$299.99

“Sometimes the best design is the simplest one, and the Z-Gate shifter is a great example of just that. With the fewest moving parts of any automatic shifter in the B&M line, the Z-Gate shifter and its patented internal “”Z”” shaped gate system eliminates the possibility of over-shifting and missing gears. Fewer moving parts means less possibility of failure and with many of the same great features of the higher priced shifters, you just can’t go wrong! The Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most popular 3-speed transmission applications. Notes: Ford AOD transmissions will require optional kit# 40496″

Edelbrock Hydraulic Roller Lifter Kit, 97384

from

$329.99

Edelbrock part No: 97384 high performance hydraulic roller lifters for 1987 and later small-block Chevys are the perfect match for Edelbrock Rollin’ Thunder hydraulic roller cams. The Edelbrock Part No: 97384 are a drop-in replacement for 1987 and later blocks that accept factory roller camshafts. These precision hydraulic roller lifters feature tight ID tolerances that allow for better control at higher RPM and a micro finish OD for reduced friction.

Mr. Gasket Ultra Seal: Valve Cover Gasket Set, 5860

from

$33.59

Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair. These gaskets are .187 inch thick.

from

$25.99

Spectre’s Chevy short block timing chain cover kit is designed to protect engine components like timing gears and the timing chain. This kit features a triple chrome plated steel construction and includes a pre-installed seal, base gasket, (10) 12-point screws and a 12 point socket. This timing cover kit is engineered for optimum fit and function and it is designed to fit Chevy 265-400 short block engines.

Yukon Gear 1310 U/Joint With Zerk Fitting On Cross, 42008

from

$44.99

“Yukon 1310 U/Joint with zerk fitting on cross. 3.219″” snap ring span, 1.062″” cap diameter. Outside snap ring.”

K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002

from

$18.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Mr. Gasket Ultra Seal: Intake Gasket, 5818

from

$59.39

Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

B & M Transpak For 65-87 Th400 Transmission, 20228

from

$172.99

The B&M Transpak is the next step up from the B&M Shift Improver kit. It has all the features in the Shift Improver kit, plus it provides additional driver manual control (GM TH-400, 350, Ford C-6 and Chrysler Torqueflite only). B&M Transpak kit for 1965-1987 GM TH400/375 automatic transmissions. Most stock automatic transmissions won’t downshift into low gear above 15 mph, and automatically upshift at a predetermined speed no matter what gear you’re in. With the Transpak, you can downshift at any speed, and you can hold the transmission in first gear to any speed that you want! This is an asset when you’ve got a modified engine, and you want additional RPMs, or you’re towing a trailer or driving heavy loads downhill. Stage 1. Heavy Duty is for street rods, normal passenger vehicles or other heavy duty use. Firmer shift feel but not harsh. Improves transmission performance and life dramatically without loss of comfort and offers normal automatic operation when in Drive. Stage 2 is for Hi-Performance street use. Essentially the same as Heavy Duty mode except shifts are much quicker. Retains full automatic features and standard shift points with selector in Drive.

Mr. Gasket Aluminum Exhaust Gaskets For Intense Heat Resistance, 7402G

from

$51.99

Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

"JBA Performance 1832Sjs 1 1/2"" Header Shorty Stainless Steel 96-99 Gm Truck 5.0/5.7L Silver Ceramic"

from

$801.99

JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Richmond Gear Differential Ring And Pinion, 49-0068-1

from

$354.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

from

$223.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Flowmaster Inc. Super 40 Muffler 409S - 3.00 Offset In - 3.00 Offset Out - Aggressive Sound, 853048

from

$170.99

Developed from our Top Ten race muffler lineup for use on the street/strip, the Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound, especially on forced induction and high horsepower vehicles. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

PerTronix 808412 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red

from

$80.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Upgrade your 1990 GMC C1500 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1990 GMC C1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your C1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 215 Performance and Racing Products for the 1990 GMC C1500, designed to meet your needs without breaking the bank. From Performance Oil Filter replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1990 GMC C1500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,399.99, with an average price of $255.13. Our 215 Performance and Racing Products in stock come from 31 trusted brands, so you’re sure to find the right part for your 1990 GMC C1500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 GMC C1500, we stock popular OEM and aftermarket Performance and Racing Products from top names like B & M, MSD Ignition, FEL-PRO Performance, and more. B & M Performance and Racing Products start at just $399.99 and boast an impressive 4.3 stars average rating from customers. MSD Ignition and FEL-PRO Performance also bring quality to the table, with Performance and Racing Products available starting at $32.99, and at an average 4.3 stars rating. With 1,882 customer reviews and counting, our 1990 GMC C1500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 GMC C1500 is always ready to roll. We’re committed to providing you with everything you need to keep your C1500 in top shape, all in one place. Start shopping confidently below for your 1990 GMC C1500!

Best-Selling Performance Oil Filters for 1990 GMC C1500s

Enhance the driving experience in your GMC with 3 quality Performance Oil Filter components, starting at $13.79.

show more show less

K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

from

$18.99

Mr. Gasket Chrome Oil Fill Cap - Push-On Style W/Tube For Pvc Hookup - Fitting For Easy Pcv Hose Hook Up, 2063

from

$13.79

This chrome-plated steel push-on breather/oil filler cap fits over your oil filler tube. It has a side fitting for easy PCV hose (positive crankcase ventilation) hook up. Perfect compliment to Mr. Gasket matching chrome oil filler tube, #2066

Most Popular 1990 GMC C1500 Performance Ignition Products

Customize your GMC with 13 Performance Ignition Products products like Performance Coils, Performance Spark Plug Wires, and Performance Ignition Modules, all priced under $519.99.

show more show less

MSD Ignition Harness, Msd 6 To Gm Dual-Connector Coil, 8876

from

$81.99

The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.

from

$99.99

Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.

MSD Ignition Ignition Coil, Gm External Hei, High Performance, 8226

from

$82.99

Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory-style housings. MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.

MSD Ignition Wire Set - Street Fire, Multi-Angle Plug, HEI, Universal, 5550

from

$81.99

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve.

MSD Ignition Ignition Coil, Direct-Fit Replacement, High Energy Output, Easy Installation, 5526

from

$74.99

GM Dual connector coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red

from

$91.99

Accel High Performance Ignition Module for GM Remote Mount Coil HEI - Replacement GM Remote Mount Coil HEI. 1986 thru 1992, 35362

from

$103.99

This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM Remote Mount Coil HEI distributors for V8 engines.

Accel Spark Plug Wire Set - Extreme 9000 Ceramic Boot - Chevy/GMC 85-97 5.0/5.7L TBI - This custom fit extreme heat ceramic boot spark plug wire se...

from

$267.99

ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

MSD Ignition Wire Set - Super Conductor, Chevy Truck 305-350, 1985-On, 31419

from

$173.99

“Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire, incredibly low resistance without electronic interference. In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “”choke””. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps, one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps, one for the sleeve of the wire and another separate crimp to grasp the conductor.”

JBA Performance W0840 Ignition Wires 88-95 GM 4.3L Full Size Truck Red

from

$104.99

JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

Mallory Distributor Wiring Harness, 29349

from

$35.49

3-wire for ignition box. PERFORMANCE PARTS>PERFORMANCE IGNITION/STARTING/CHARGING>IGNITION>IGNITION ACCESSORIES & OTHER from Mallory

"MSD Ignition Crank Trigger Kit, Small Block Chevy, 6"" Balancer, 8600"

from

$519.99

For a long time, racers have known that one of the best things to do to an engine to improve performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger system does exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle. Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris, or even vibrations which will cause a loss of power or engine damage.

Mallory Promaster Classic Series Ignition Coil, 29440

from

$204.99

The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.

Top Picks for 1990 GMC C1500 Performance Fuel Systems

Upgrade GMC C1500s with top-quality Performance Fuel Systems parts, including 1 OEM and aftermarket selections for your 1990 model.

show more show less

Carquest Remanufactured Diesel Fuel Injection Pump, AM91063

from

$727.99

CARQUEST premium remanufactured fuel injection pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is tested on a sophisticated flow bench under multiple operating parameters.

In-Demand Performance Mufflers for 1990 GMC C1500s

Select from 8 premium Performance Mufflers parts for your 1990 GMC C1500, with prices ranging from $131.99 to $482.99.

show more show less

Flowmaster Inc. Super 44 Series Muffler 409S - 2.50 Offset In-2.50 Offset Out - Aggressive Sound, 842548

from

$139.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID, 17519

from

$131.99

DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our excl usive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo SS Polished mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

Flowmaster Inc. 40 Delta Flow Muffler - 3.00 Center In - 2.50 Dual Out - Aggressive Sound, 9430402

from

$149.99

This two chamber design incorporates Flowmaster’s Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

Flowmaster Inc. 50 Delta Muffler 409S - 2.50 Offset In - 2.50 Offset Out - Moderate Sound, 842553

from

$188.99

The three chamber design utilizes Flowmaster’s Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Dynomax Super Turbo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID, 17749

from

$131.99

DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Super Turbo mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID, 17273

from

$482.99

Flowmaster Inc. Super 40 Muffler - 3.00 Center In - 2.50 Dual Out - Aggressive Sound, 9530452

from

$173.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow&reg technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

Flowmaster Inc. 40 Delta Muffler 409S - 3.00 Center In - 2.50 Dual Out - Aggressive Sound, 8430402

from

$170.99

This two chamber design incorporates Flowmaster’s Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Most Sold 1990 GMC C1500 Performance Engines

Explore our best-selling GMC parts for the 1990 C1500 among 77 OEM and aftermarket options starting from $8.99.

show more show less

from

$10.39

This is a high quality gasket that will seal that leaking water neck, and provide you with years of service. This gasket works well in all applications.

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1003

from

$42.49

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1004

from

$44.99

Spectre Chevrolet Small Block V8 Harmonic Balancer Bolt Kit, 4699

from

$8.99

Spectre’s Harmonic Balancer Bolt Kit is designed to fit Chevrolet Small Block 265-400 V8 engines. This grade 8 bolt is 2-1/2 inches long, and features a plated finish for corrosion resistance. This kit also includes a security lock washer.

FEL-PRO Performance Engine Valve Cover Gasket Set, 1603

from

$31.99

Edelbrock Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish, 2104

from

$346.99

Edelbrock part #2104 Performer intake manifold is designed for street 262-400 c.i.d. Chevy V8’s that have heads with canted center bolt holes, 1987-1995. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. For 1987-95 stock aluminum heads use #2101.

FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1602

from

$23.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

from

$584.99

The Tork Master 3000 fits 1965-91 GM TH400, 425, 375 and 1968-81 GM TH350, 375B (not 350C) transmissions. Don’t let the exceptional value fool you into thinking Tork Master Converters are not packed with lots of quality features, making them the best value-priced street performance converters money can buy. These converters perform best when paired with stock to modified engines up to 350hp/350 ft lbs of torque, and lighter weight applications, like street rods. The Tork Master will provide noticeably quicker launches and harder acceleration while maintaining normal daily driving qualities. Upgrades like a new precision alloy steel pump drive tube, needle thrust bearing when factory equipped, new thrust washer between turbine and cover when required, and pressure tested and fully balanced by expertly trained technicians. Notes: Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. Not recommended for big block, supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75-inch bolt circle

from

$399.99

The Tork Master 2400 fits 1965-91 GM TH400, 425, 375 and 1968-81 GM TH350, 375B (not 350C.) Don’t let the exceptional value fool you into thinking Tork Master Converters are not packed with lots of quality features, making them the best value-priced street performance converters money can buy. These converters perform best when paired with stock to modified engines up to 350hp/350 ft lbs of torque, and lighter weight applications, like street rods. The Tork Master will provide noticeably quicker launches and harder acceleration while maintaining normal daily driving qualities. Upgrades like a new precision alloy steel pump drive tube, needle thrust bearing when factory equipped, new thrust washer between turbine and cover when required, and pressure tested and fully balanced by expertly trained technicians. Notes: Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. Not recommended for big block, supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75-inch bolt circle

Mr. Gasket Ultra-Seal Intake Manifold Gasket With Silicone Beading, 5821

from

$36.99

Mr. Gasket Ultra-Seal Intake Manifold Gasketss are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For original equipment replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Mr. Gasket Intake Manifold Bolt Set, 6091

from

$39.29

These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

from

$31.99

Mr. Gasket Intake Manifold Bolt Set - Hex Head, 955G

from

$18.79

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Edelbrock Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet, 3702

from

$322.99

“Edelbrock part No: 3702 Performer-Plus camshaft is designed for small-block Chevy 305-350 T.B.I & LG-4 V-8 applications. This Edelbrock cam kit produced 245 ft-lbs. of torque when used with No: 3701 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: – Duration at .050 Intake: 194 degrees – Duration at .050 Exhaust: 214 degrees – Lift at Valve Intake: .398″” – Lift at Valve Exhaust: .442″” – Lobe Separation: 112 Degrees – Intake Centerline: 107 Degrees – Idle Vacuum at 1000 RPM’s: 16″””

Competition Cams High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit, CL12-210-2

from

$898.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.

Competition Cams Big Mutha' Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit, CL12-602-4

from

$397.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

from

$259.99

from

$10.99

Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

from

$21.49

Competition Cams OE-Style Hydraulic Roller Lifter Set for '87+ OE Roller SBC and LT/LS Engines, 850-16

from

$288.99

COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.

FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1010

from

$51.99

from

$223.99

FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1886

from

$63.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

B & M Performance Torque Converter For Gm Th400, 350, & 375 Transmissions, 20400

from

$349.99

Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

Top-Rated Performance and Racing Products Brands For Your 1990 GMC C1500

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1990 GMC C1500s. Below you’ll find some of our best rated Performance and Racing Products from B & M, MSD Ignition, and FEL-PRO Performance, and more. Performance and Racing Products from these brands that fit a 1990 C1500 start at just $32.99 and are rated as high as 4.3 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular B & M 1990 GMC C1500 Performance and Racing Products

When it comes to maintaining or upgrading your 1990 GMC C1500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. B & M ticks all of those boxes. We offer a wide selection of B & M Performance and Racing Products, specifically designed for the 1990 GMC C1500. With over 3 B & M brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $399.99, with an average price of just $511.66. Plus, with over 3 customer reviews and an average rating of 4.3 stars, you can trust that our B & M Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

B & M Automatic Shifter - Megashifter - Universal, 80690

from $549.99

(1)

B & M Automatic Shifter – Megashifter – Universal, 80690

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

from $584.99

(1)

B & M Tork Master 3000, 20402

“good parts and very strong”

from $399.99

(1)

B & M Tork Master 2400, 20404

“The B&M 2400 stall converter was a great choice for my application. It works well on the street and track, increased performance by leaps and bounds. ”

Popular MSD Ignition 1990 GMC C1500 Performance and Racing Products

MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1990 GMC C1500 owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1990 C1500, Advance Auto Parts carries a full inventory of 3 MSD Ignition Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range from $81.99 to $399.99, plus, with more than 7 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $81.99

(3)

MSD Ignition Harness, Msd 6 To Gm Dual-Connector Coil, 8876

“Great”

from $82.99

(3)

MSD Ignition Ignition Coil, Gm External Hei, High Performance, 8226

“This product is great, I also installed the msd cap and rotor and an msd ingnition 6a These products togeather create performace and a little more pow”

MSD Ignition Distributor, Chevy V8, Pro-Billet, With Cap And Rotor, 85551

from $399.99

(1)

MSD Ignition Distributor, Chevy V8, Pro-Billet, With Cap And Rotor, 85551

“Have used this distributor in several engine builds without any issues. Works great when timing is locked also. Won’t use anything else.”

FAQs for 1990 GMC C1500 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1990 GMC C1500s?

Out of 215 Performance and Racing Products that fit 1990 GMC C1500s, the following parts are the top sellers:

K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (6120022) – $18.99
K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (6120007) – $17.99
Mr. Gasket Water Outlet Gasket, 740C (6120954) – $10.39

What’s the price range for 1990 GMC C1500 Performance and Racing Products?

Performance and Racing Product prices for the 1990 GMC C1500 start at $5.99 and go up to $1,399.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1990 GMC C1500?

The average price for Performance and Racing Products for the 1990 GMC C1500 is $255.13. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other GMC C1500 model years?

Yes, we currently carry Performance and Racing Products for 18 model years of GMC C1500s between 1979 and 1999. Performance and Racing Products are bought most frequently for the following model years: 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1992, and 1991.

What are the cheapest Performance and Racing Products for my 1990 GMC C1500?

The cheapest 1990 GMC C1500 Performance and Racing Products we carry in stock are:

Energy Suspension Tie Rod Dust Boot, 9.13101R (17360821) – $5.99
Energy Suspension Tie Rod End Boot (Octagon) – 2-Pack, 9.13102G (22906874) – $6.29
Spectre Chevrolet Small Block V8 Harmonic Balancer Bolt Kit, 4699 (22905376) – $8.99
Energy Suspension Front Shock Bushing Set, 9.8137R (22906598) – $9.99
Mr. Gasket Water Outlet Gasket, 740C (6120954) – $10.39

What are the top-rated Performance and Racing Products that fit the 1990 GMC C1500?

Out of 1,882 reviews by customers, our 1990 GMC C1500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1990 GMC C1500 and their top-rated products:

Performance Mufflers
- Flowmaster Inc. Super 44 Series Muffler 409S – 2.50 Offset In-2.50 Offset Out – Aggressive Sound, 842548 (10193882) – $139.99
- Flowmaster Inc. 40 Delta Flow Muffler – 3.00 Center In – 2.50 Dual Out – Aggressive Sound, 9430402 (17310119) – $149.99
- Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID, 17519 (18370838) – $131.99
Performance Oil Filters
- Flowmaster Inc. Super 44 Series Muffler 409S – 2.50 Offset In-2.50 Offset Out – Aggressive Sound, 842548 (10193882) – $139.99
- Flowmaster Inc. 40 Delta Flow Muffler – 3.00 Center In – 2.50 Dual Out – Aggressive Sound, 9430402 (17310119) – $149.99
- Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID, 17519 (18370838) – $131.99
Performance Shifters
- Flowmaster Inc. Super 44 Series Muffler 409S – 2.50 Offset In-2.50 Offset Out – Aggressive Sound, 842548 (10193882) – $139.99
- Flowmaster Inc. 40 Delta Flow Muffler – 3.00 Center In – 2.50 Dual Out – Aggressive Sound, 9430402 (17310119) – $149.99
- Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID, 17519 (18370838) – $131.99

What types of Performance and Racing Products do you sell for my 1990 GMC C1500?

As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1990 GMC C1500:

Can I get help with 1990 GMC C1500 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.

What is your return policy for GMC C1500 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new GMC C1500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1990 GMC C1500 Performance and Racing Products

Mr. Gasket – Mr. Gasket Ultra Seal: Competition Screw-In Rocker Arm Studs, 1075 (Part No.1075)

Energy Suspension – Energy Suspension Ball Joint Dust Boot Set, 9.13126R (Part No.9.13126R)

Energy Suspension – Energy Suspension Body Cab Mount Set, 3.4116G (Part No.3.4116G)

Competition Cams – Competition Cams XE 224/230 Hydraulic Roller Cam and Lifter Kit, CL11-423-8 (Part No.CL11-423-8)

FEL-PRO Performance – FEL-PRO Performance Stainless steel core laminate Engine Cylinder Head Gasket, 1047 (Part No.1047)

NOS/Nitrous Oxide Systems – NOS/Nitrous Oxide Systems Nitrous Systems-Performance, 02519NOS (Part No.02519NOS)

Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set – Socket Head, 956G (Part No.956G)

MSD Ignition – "MSD Ignition Distributor Gear, Chevy Distributor, 0.500"" Id, Iron, 8531" (Part No.8531)

Mr. Gasket – Mr. Gasket Thermocap Radiator Cap, 2470R (Part No.2470R)

Competition Cams – Competition Cams Magnum/Oval Track 244/244 Hydraulic Flat Cam, 11-213-3 (Part No.11-213-3)

Mr. Gasket – Mr. Gasket Timing Cover Seal, 17 (Part No.17)

Weiand – Weiand Action +Plus Water Pump, 9212P (Part No.9212P)

Mr. Gasket – Mr. Gasket High Performance Thermostat – 160 Degree Brass & Copper, 4363 (Part No.4363)

B & M – B & M Flexplate For 168 Tooth 454 Cid, 20233 (Part No.20233)

B & M – B & M Automatic Shifter – Z-Gate – Universal, 80681 (Part No.80681)

Edelbrock – Edelbrock Hydraulic Roller Lifter Kit, 97384 (Part No.97384)

Mr. Gasket – Mr. Gasket Ultra Seal: Valve Cover Gasket Set, 5860 (Part No.5860)

Spectre – Spectre Timing Cover Comp Kit, 42353 (Part No.42353)

Yukon Gear – Yukon Gear 1310 U/Joint With Zerk Fitting On Cross, 42008 (Part No.42008)

K&N – K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (Part No.HP-3002)

Mr. Gasket – Mr. Gasket Ultra Seal: Intake Gasket, 5818 (Part No.5818)

B & M – B & M Transpak For 65-87 Th400 Transmission, 20228 (Part No.20228)

Mr. Gasket – Mr. Gasket Aluminum Exhaust Gaskets For Intense Heat Resistance, 7402G (Part No.7402G)

JBA Performance – "JBA Performance 1832Sjs 1 1/2"" Header Shorty Stainless Steel 96-99 Gm Truck 5.0/5.7L Silver Ceramic" (Part No.1832SJS)

Richmond Gear – Richmond Gear Differential Ring And Pinion, 49-0068-1 (Part No.49-0068-1)

Competition Cams – Competition Cams Valve Seals, 503-16 (Part No.503-16)

Flowmaster Inc. – Flowmaster Inc. Super 40 Muffler 409S – 3.00 Offset In – 3.00 Offset Out – Aggressive Sound, 853048 (Part No.853048)

PerTronix – PerTronix 808412 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red (Part No.808412)

K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2001 (Part No.HP-2001)

K&N – K&N Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine, HP-3002 (Part No.HP-3002)

Mr. Gasket – Mr. Gasket Chrome Oil Fill Cap – Push-On Style W/Tube For Pvc Hookup – Fitting For Easy Pcv Hose Hook Up, 2063 (Part No.2063)

MSD Ignition – MSD Ignition Harness, Msd 6 To Gm Dual-Connector Coil, 8876 (Part No.8876)

Mallory – Mallory Unilite Ignition Module, 605 (Part No.605)

MSD Ignition – MSD Ignition Ignition Coil, Gm External Hei, High Performance, 8226 (Part No.8226)

MSD Ignition – MSD Ignition Wire Set – Street Fire, Multi-Angle Plug, HEI, Universal, 5550 (Part No.5550)

MSD Ignition – MSD Ignition Ignition Coil, Direct-Fit Replacement, High Energy Output, Easy Installation, 5526 (Part No.5526)

PerTronix – PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

Accel – Accel High Performance Ignition Module for GM Remote Mount Coil HEI – Replacement GM Remote Mount Coil HEI. 1986 thru 1992, 35362 (Part No.35362)

Accel – Accel Spark Plug Wire Set – Extreme 9000 Ceramic Boot – Chevy/GMC 85-97 5.0/5.7L TBI – This custom fit extreme heat ceramic boot spark plug wire se… (Part No.9020C)

MSD Ignition – MSD Ignition Wire Set – Super Conductor, Chevy Truck 305-350, 1985-On, 31419 (Part No.31419)

JBA Performance – JBA Performance W0840 Ignition Wires 88-95 GM 4.3L Full Size Truck Red (Part No.W0840)

Mallory – Mallory Distributor Wiring Harness, 29349 (Part No.29349)

MSD Ignition – "MSD Ignition Crank Trigger Kit, Small Block Chevy, 6"" Balancer, 8600" (Part No.8600)

Mallory – Mallory Promaster Classic Series Ignition Coil, 29440 (Part No.29440)

Carquest Premium – Carquest Remanufactured Diesel Fuel Injection Pump, AM91063 (Part No.AM91063)

Flowmaster Inc. – Flowmaster Inc. Super 44 Series Muffler 409S – 2.50 Offset In-2.50 Offset Out – Aggressive Sound, 842548 (Part No.842548)

Dynomax – Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID, 17519 (Part No.17519)

Flowmaster Inc. – Flowmaster Inc. 40 Delta Flow Muffler – 3.00 Center In – 2.50 Dual Out – Aggressive Sound, 9430402 (Part No.9430402)

Flowmaster Inc. – Flowmaster Inc. 50 Delta Muffler 409S – 2.50 Offset In – 2.50 Offset Out – Moderate Sound, 842553 (Part No.842553)

Dynomax – Dynomax Super Turbo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID, 17749 (Part No.17749)

Dynomax – Dynomax Ultra Flo Exhaust Muffler 3 Inch Inlet ID 2.5 Inch Outlet ID, 17273 (Part No.17273)

Flowmaster Inc. – Flowmaster Inc. Super 40 Muffler – 3.00 Center In – 2.50 Dual Out – Aggressive Sound, 9530452 (Part No.9530452)

Flowmaster Inc. – Flowmaster Inc. 40 Delta Muffler 409S – 3.00 Center In – 2.50 Dual Out – Aggressive Sound, 8430402 (Part No.8430402)

Mr. Gasket – Mr. Gasket Water Outlet Gasket, 740C (Part No.740C)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1003 (Part No.1003)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1004 (Part No.1004)

Spectre – Spectre Chevrolet Small Block V8 Harmonic Balancer Bolt Kit, 4699 (Part No.4699)

FEL-PRO Performance – FEL-PRO Performance Engine Valve Cover Gasket Set, 1603 (Part No.1603)

Edelbrock – Edelbrock Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish, 2104 (Part No.2104)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1602 (Part No.1602)

B & M – B & M Tork Master 3000, 20402 (Part No.20402)

B & M – B & M Tork Master 2400, 20404 (Part No.20404)

Mr. Gasket – Mr. Gasket Ultra-Seal Intake Manifold Gasket With Silicone Beading, 5821 (Part No.5821)

Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set, 6091 (Part No.6091)

Mr. Gasket – Mr. Gasket High Performance Thermostat – 160 Degree Brass & Copper, 4363 (Part No.4363)

Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set – Hex Head, 955G (Part No.955G)

Edelbrock – Edelbrock Performer-Plus Camshaft Kit for 1976-95 Small Block Chevrolet, 3702 (Part No.3702)

Competition Cams – Competition Cams High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit, CL12-210-2 (Part No.CL12-210-2)

Competition Cams – Competition Cams Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit, CL12-602-4 (Part No.CL12-602-4)

Weiand – Weiand Action Plus Water Pumps, 9240P (Part No.9240P)

Spectre – Spectre Bolt Kit Intake Hex Head, 4652 (Part No.4652)

Mr. Gasket – Mr. Gasket Intake Manifold Bolt Set – Socket Head, 956G (Part No.956G)

Competition Cams – Competition Cams OE-Style Hydraulic Roller Lifter Set for ’87+ OE Roller SBC and LT/LS Engines, 850-16 (Part No.850-16)

FEL-PRO Performance – FEL-PRO Performance Steel core laminate Engine Cylinder Head Gasket, 1010 (Part No.1010)

Competition Cams – Competition Cams Valve Seals, 503-16 (Part No.503-16)

FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1886 (Part No.1886)

B & M – B & M Performance Torque Converter For Gm Th400, 350, & 375 Transmissions, 20400 (Part No.20400)