1990 Dodge W350 Performance and Racing Products

Essential Performance and Racing Products for 1990 Dodge W350s

Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

High-Performance Ignition Coil - Direct OE Fit

from

$72.39
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Uf-198
  • MSD 8228
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-212-2)

High Energy 218/218 Hydraulic Flat Cam and Lifter Kit

from

$1093.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Mr. Gasket – Header Bolts (Part No.976)

Header Bolts

from

$22.49
When installing headers you will need header bolts, factory exhaust manifold bolts won’t work. These Mr. Gasket Header Bolts are Grade 5 for strength, black oxide coated, and have a compact hex head that is ideal for use where space is minimal – your typical header flanges. Sold as a set of 14.

Product Features:
  • 14 per Package
  • Heat-Treated For Strength
  • Ideal For Tight Spaces
  • Grade 5 Material
  • Protective Black Finish
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280022ERL)

Brake Bleeder Screws

from

$32.59
Brake Bleeder Screws

Flowtech – Header Gasket Set (Part No.99361FLT)

Header Gasket Set

from

$18.59
Header Gasket Set

Rancho – RS5000 Steering Damper (Part No.RS5403)

RS5000 Steering Damper

from

$78.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
  • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
  • ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
  • HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
See More

Mr. Gasket – Valve Cover Gasket Set (Part No.379)

Valve Cover Gasket Set

from

$36.49
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track use
See More

Hurst – Automatic Shifter, Quarter Stick (Part No.3160009)

Automatic Shifter, Quarter Stick

from

$426.99
The award-winning Quarter Stick automatic shifter is designed to provide positive gear change control for street or racing transmission applications. Gated mechanism. NHRA/IHRA approved reverse lockout.

Product Features:
  • Forward and Reverse Shift Patterns
  • Chrome Plated Trigger for Detent Activity
  • Factory Neutral Safety Switch
  • Compact And Lightweight
  • Roller Detent with Shifter Pattern
See More

B & M – Flexplate, 6 Bolt Crank for TF 727 (Part No.10230)

Flexplate, 6 Bolt Crank for TF 727

from

$154.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1962-up TF727 transmissions and all internally balanced Chrysler, Dodge and Plymouth V8 engines with 6-bolt crankshaft flange. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.00 or 11.125 inch converter mounting locations and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

Powertrax – No-Slip Traction System (Part No.9203923125)

No-Slip Traction System

from

$579.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1008)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $41.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1806)

    PERFORMANCE OIL PAN GASKET SET

    from

    $21.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1023)

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

    from

    $149.99
    K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

    Product Features:
    • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
    • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
    • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
    • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
    • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
    • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
    • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
    • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
    See More

    Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound (Part No.52556)

    50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound

    from

    $185.99
    The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    Richmond Gear – Differential Ring And Pinion (Part No.69-0054-1)

    Differential Ring And Pinion

    from

    $369.99
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    Spectre – Valve Cover (Part No.5274)

    Valve Cover

    from

    $64.99
    Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1965-1991 Chrysler 273-318-340-360 engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

    Product Features:
    • Designed for 1965-1991 Chrysler 273-318-340-360 engines
    • Baffled for breather system compatibility
    • Sold in pairs
    • Triple chrome-plated steel construction
    • Stock height
    • Features OEM style sealing edge
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Edelbrock – RPM Air-Gap Small Block Chrysler Intake Manifold (Part No.7576)

    RPM Air-Gap Small Block Chrysler Intake Manifold

    from

    $473.99
    Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. Accepts early-style waterneck only. Non-EGR. Mopar 340-360. 4 bbl carb. For street and high pe

    Product Features:
    • Based on Performer RPM-Series with Unique Air Gap
    • Air Gap Cooler and Denser Mixture for More Power
    • Designed For 1500 To 6500 RPM
    • Dual-Plane High-Rise Intake
    • Accepts Early-Style Waterneck
    See More

    Edelbrock – XX Victor W-2 Intake Manifold for Chrysler 340-360 w/Chrysler W2 Oval Port Head (Part No.2920)

    XX Victor W-2 Intake Manifold for Chrysler 340-360 w/Chrysler W2 Oval Port Head

    from

    $351.99
    Race winning performance. For 3500 to 8000 RPM high-performance engines. For oval track and drag race engines. Use appropriate racing carburetor.

    Product Features:
    • For 3500 to 8000 RPM High-Performance Engines
    • for Oval Track And Drag Race Engines
    • Race Winning Performance
    • Use Appropriate Racing Carburetor
    See More

    B & M – Flexplate, TF 727 360 CID (Part No.10236)

    Flexplate, TF 727 360 CID

    from

    $154.99
    As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1971-92 Chrysler, Dodge and Plymouth (externally balanced) 360ci V8 engine (6-bolt crankshaft flange) and A727 transmission. Features include high tensile strength steel construction to resist elongation and cracking, 10.00 and 11.125 inch bolt patterns and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

    Product Features:
    • NHRA/IHRA Legal For All Classes
    • Includes SFI Certification Sticker
    • Ideal For Street Applications
    • To Extreme Duty Racing
    • To High RPM Use
    See More

    Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3757901)

    Unilite Electronic Ignition Distributor Series 37

    from

    $538.99
    The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

    Product Features:
    • Improved Combustion And Economy
    • Increased Spark Plug Life
    • Improved Cold Weather Starting
    • Maintenance Free Operation
    • Accurate Spark Timing
    • Self-Lubricating Bushings
    • Years Of Trouble-Free Service
    See More

    Mr. Gasket – Oil Pan Bolt Kit (Part No.6088)

    Oil Pan Bolt Kit

    from

    $18.99
    Oil Pan Bolt Kit

    Upgrade your 1990 Dodge W350 with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1990 Dodge W350, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Performance and Racing Products are key to keeping your W350 functioning at its best. At Advance Auto Parts, we offer a wide selection of 42 Performance and Racing Products for the 1990 Dodge W350, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Oil Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1990 Dodge W350 at great prices. Our Performance and Racing Products inventory for this model ranges from just $17.49 to $1,093.99, with an average price of $215.05. Our 42 Performance and Racing Products in stock come from 16 trusted brands, so you’re sure to find the right part for your 1990 Dodge W350 without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Dodge W350, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N Mr. Gasket, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 5 stars average rating from customers. With 297 customer reviews and counting, our 1990 Dodge W350 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Dodge W350 is always ready to roll. We’re committed to providing you with everything you need to keep your W350 in top shape, all in one place. Start shopping confidently below for your 1990 Dodge W350!

    Best-Selling Performance Exhaust Products for 1990 Dodge W350s

    Enhance the driving experience in your Dodge with 8 quality Performance Exhaust Product components, starting at $18.59.

    Flowtech – Header Gasket Set (Part No.99361FLT)

    Header Gasket Set

    from

    $18.59
    Header Gasket Set

    Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953048)

    Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound

    from

    $133.99
    The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5935)

    Ultra Seal: Exhaust Gasket Set

    from

    $38.49
    Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Has A Steel Core With Graphite Facing
    • Graphite Facing Has Excellent Thermo-conductivity
    • High Recovery Mat Allows For Better Seal Retention
    See More

    Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53058)

    50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound

    from

    $185.99
    The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.852546)

    Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound

    from

    $154.99
    The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

    Product Features:
    • Durable fully welded 409 stainless steel
    • Deep aggressive exhaust note
    • Noticeable interior resonance
    • Excellent performance on high horsepower vehicles
    • No internal packing to blowout
    See More

    Mr. Gasket – Header Bolts (Part No.976)

    Header Bolts

    from

    $22.49
    When installing headers you will need header bolts, factory exhaust manifold bolts won’t work. These Mr. Gasket Header Bolts are Grade 5 for strength, black oxide coated, and have a compact hex head that is ideal for use where space is minimal – your typical header flanges. Sold as a set of 14.

    Product Features:
    • 14 per Package
    • Heat-Treated For Strength
    • Ideal For Tight Spaces
    • Grade 5 Material
    • Protective Black Finish
    See More

    Flowmaster Inc. – Delta 40 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842541)

    Delta 40 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound

    from

    $154.99
    This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
    See More

    Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound (Part No.52556)

    50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound

    from

    $185.99
    The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Most Popular 1990 Dodge W350 Performance Oil Filters

    Customize your Dodge with 3 Performance Oil Filters products like Performance Oil Filters, all priced under $97.99.

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-4003)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

    Remote Oil Filter Kit

    from

    $97.99
    This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

    Product Features:
    • Relocate oil filter to an easy access location
    See More

    Top Picks for 1990 Dodge W350 Performance Engines

    Upgrade Dodge W350s with top-quality Performance Engines parts, including 10 OEM and aftermarket selections for your 1990 model.

    Mr. Gasket – Valve Cover Gasket Set (Part No.379)

    Valve Cover Gasket Set

    from

    $36.49
    Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

    Product Features:
    • Manufactured from high-density cork/rubber blend gasket material
    • Provides excellent sealing and durability
    • For OE replacement, high performance street, drag race and oval track use
    See More

    FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1607)

    Performance Valve Cover Gasket Set

    from

    $18.99
    Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

    Product Features:
    • Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

    Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

    from

    $17.49
    These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

    Product Features:
    • Zinc plated to resist corrosion and provide a clean professional appearance
    • Made from Grade 5 steel for strength and durability
    • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
    • Allen (socket) Head
    • Zinc Plated For Protection
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1008)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $41.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1608)

    PERFORMANCE VALVE COVER GASKET SET

    from

    $37.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
    • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
    • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
    • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
    • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
    See More

    FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set (Part No.1807)

    Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set

    from

    $30.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-212-2)

    High Energy 218/218 Hydraulic Flat Cam and Lifter Kit

    from

    $1093.99
    Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

    Product Features:
    • Good blend of efficiency and performance.
    • Perfect choice for performance street rebuilds.
    • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
    See More

    Weiand – Hi-Ram Intake Manifold (Part No.1995)

    Hi-Ram Intake Manifold

    from

    $703.99
    Hi-Ram Intake Manifold

    Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-222-3)

    Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit

    from

    $378.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

    Super Intake Manifold Bolts

    from

    $27.49
    These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

    Product Features:
    • Assures Accurate Torque App
    • Prevents Galling Manifold
    • Grade 5 Material
    • Black Oxide Coasted
    See More

    In-Demand Performance Ignition Products for 1990 Dodge W350s

    Select from 3 premium Performance Ignition Products parts for your 1990 Dodge W350, with prices ranging from $30.49 to $186.99.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Most Sold 1990 Dodge W350 Performance Air Filters

    Explore our best-selling Dodge parts for the 1990 W350 among 1 OEM and aftermarket options starting from $149.99.

    K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1023)

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

    from

    $149.99
    K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

    Product Features:
    • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
    • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
    • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
    • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
    • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
    • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
    • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
    • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
    See More

    Top-Rated Performance and Racing Products Brands For Your 1990 Dodge W350

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1990 Dodge W350s. Below you’ll find some of our best rated Performance and Racing Products from K&N and Mr. Gasket, and more. Performance and Racing Products from these brands that fit a 1990 W350 start at just $17.49 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular K&N 1990 Dodge W350 Performance and Racing Products

    When it comes to maintaining or upgrading your 1990 Dodge W350, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1990 Dodge W350. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $61.99. Plus, with over 157 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
    from
    $149.99

    (2)

    Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

    “Excellent filter! I believe your filters are the best on the market.”

    Popular Mr. Gasket 1990 Dodge W350 Performance and Racing Products

    Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1990 Dodge W350 owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1990 W350, Advance Auto Parts carries a full inventory of 7 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $17.49 to $97.99, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Remote Oil Filter Kit
    from
    $97.99
    This product is not rated

    Remote Oil Filter Kit

    “”

    Ultra Seal: Exhaust Gasket Set
    from
    $38.49
    This product is not rated

    Ultra Seal: Exhaust Gasket Set

    “”

    FAQs for 1990 Dodge W350 Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1990 Dodge W350s?

    Out of 42 Performance and Racing Products that fit 1990 Dodge W350s, the following parts are the top sellers:

    What’s the price range for 1990 Dodge W350 Performance and Racing Products?

    Performance and Racing Product prices for the 1990 Dodge W350 start at $17.49 and go up to $1,093.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1990 Dodge W350?

    The average price for Performance and Racing Products for the 1990 Dodge W350 is $215.05. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Dodge W350 model years?

    Yes, we currently carry Performance and Racing Products for 12 model years of Dodge W350s between 1981 and 1993. Performance and Racing Products are bought most frequently for the following model years: 1993, 1992, 1991, 1989, 1988, 1987, 1986, 1985, and 1984.

    What are the cheapest Performance and Racing Products for my 1990 Dodge W350?

    What are the top-rated Performance and Racing Products that fit the 1990 Dodge W350?

    Out of 297 reviews by customers, our 1990 Dodge W350 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1990 Dodge W350 and their top-rated products:

    Can I get help with 1990 Dodge W350 Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Performance and Racing Products and more.

    What is your return policy for Dodge W350 Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Dodge W350 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.