1990 Dodge W150 Drive Shafts and Axles

Essential 1990 Dodge W150 Drive Shafts and Axles

Driveworks – Wheel Bearing (Part No.S-RP-1561-FO)

Wheel Bearing

from

$31.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$162.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More

Yukon Gear – Dana 44 Front Axle Bearing And Seal Kit Replacement (Part No.10012)

Dana 44 Front Axle Bearing And Seal Kit Replacement

from

$139.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for ’80 to ’93 Dana 44 and Dodge 1/2 ton truck front axle. This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.

Product Features:
  • Fits 1980-1993 Dodge 1/2 ton
  • Includes axle bearings, races and seal
  • Services one side
See More

Yukon Gear – Flange Yoke For Chrysler 9.25" (Part No.41012)

Flange Yoke For Chrysler 9.25"

from

$267.99
Yukon flange yoke for Chrysler 9.25″. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 9.25″ rear
  • 29 spline
  • Round companion flange
See More

SKF – Driveshaft Support with Bearing (Part No.K1030285149SKF)

Driveshaft Support with Bearing

from

$190.87
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.

Product Features:
  • OE Quality, fit and performance
  • Precise driveshaft alignment and support
  • Pre-lubricated and sealed
  • Metal reinforced seals to prevent contamination
  • Manufactured from durable rubber compounds
See More

Yukon Gear – Inner Axle Bearing For Dana 44, Dodge Disconnect (Part No.18047)

Inner Axle Bearing For Dana 44, Dodge Disconnect

from

$23.99
Product Features:
  • Inner axle bearing
  • Fits Dana Spicer 44 with disconnect axles
See More

Yukon Gear – Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear) (Part No.33268)

Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear)

from

$4.99
Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).

Product Features:
  • Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
  • Intalls next to side gear
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Drive Flange Cap For Dana 44, Engraved (Part No.32135)

Drive Flange Cap For Dana 44, Engraved

from

$103.99
Product Features:
  • Drive flange cap
  • Fits Dana 44
  • Yukon engraved
See More

Yukon Gear – 9.25" Chrysler C/Clip (Part No.33075)

9.25" Chrysler C/Clip

from

$17.99
9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.

Product Features:
  • c-clip for Chrysler 9.25″ rear
  • 0.205″ thick
See More

Yukon Gear – Intermediate Shaft Bushing For Disconnect Dana 30 & 44 (Part No.18060)

Intermediate Shaft Bushing For Disconnect Dana 30 & 44

from

$21.99
Product Features:
  • Intermediate shaft bushing
  • Fits Dana Spicer 30 and 44 with disconnect axles
See More

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More

Yukon Gear – Outer Stub Axle Nut Washer For Dodge Dana 44 & 60 (Part No.33491)

Outer Stub Axle Nut Washer For Dodge Dana 44 & 60

from

$7.99
Outer stub axle nut washer for Dodge Dana 44 & 60. This replaces Spicer part number 45523.

Product Features:
  • Outer stub axle nut washer for Dodge Dana 44 and 60
See More

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-195)

Front Drive Shaft: Greaseable, Adjustable

from

$1017.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-188)

Front Drive Shaft: Greaseable, Adjustable

from

$919.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Yukon Gear – Outer Stub Axle Nut For Dodge Dana 44 & 60 (Part No.33492)

Outer Stub Axle Nut For Dodge Dana 44 & 60

from

$20.99
Outer stub axle nut for Dodge Dana 44 & 60. This replaces Spicer part number 46085.

Product Features:
  • Outer stub axle nut for Dodge Dana 44 and 60
See More

Victor Reinz – Drive Axle Shaft Flange Gasket (Part No.71-13861-00)

Drive Axle Shaft Flange Gasket

from

$3.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Yukon Gear – Axle Seal For Semi-Floating Ford And Dodge With R1561Tv Bearing (Part No.30140)

Axle Seal For Semi-Floating Ford And Dodge With R1561Tv Bearing

from

$21.99
Axle seal for semi-floating Ford and Dodge with R1561TV bearing.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Fits Ford and Dodge applications
  • 2.985″ O.D.
  • 1.700″ I.D.
See More

Pro-King – Axle Seal (Part No.714D076)

Axle Seal

from

$5.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Replacement Inner Seal For Dana 44 & Dana 60, Quick Disconnect (Part No.30312)

Replacement Inner Seal For Dana 44 & Dana 60, Quick Disconnect

from

$15.99
Replacement inner seal for Dana 44 & Dana 60, quick disconnect (2.290″ OD).Yukon Mighty seal.

Product Features:
  • Front inner axle seal
  • Fits Dodge disconnect front with Dana Spicer 44 or 60
See More

National – Multi Purpose Seal (Part No.8835S)

Multi Purpose Seal

from

$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Ball Bearing (Part No.S-HB-88107-A)

Ball Bearing

from

$19.99
Value-priced bearing meets all cataloged application requirements.
See More

Driveworks – CENTER SUPPORT (Part No.S-HB-88108-D)

CENTER SUPPORT

from

$36.49
CENTER SUPPORT

National – Multi Purpose Bearing (Part No.HB-88107-A)

Multi Purpose Bearing

from

$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Bearing (Part No.HB-88108-D)

Multi Purpose Bearing

from

$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

1990 Dodge W150 Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1990 Dodge W150. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 54 different Drive Shafts and Axles in our inventory ranging from $3.29 to $1,017.99. That means you can find the exact parts or products you need to keep that 1990 Dodge W150 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Dodge W150. Spicer, National, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1990 Dodge W150, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 585 reviews in this category, some of the top rated parts include Ball Bearing with 3.0 stars and Center Support Bearing Motor Mount: Center, 1 Piece with 5.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1990 Dodge W150 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1990 Dodge W150 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Dodge W150 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your W150 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1990 Dodge W150, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $40.99
(10)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $51.99
(1)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints

Top 1990 Dodge W150 Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1990 Dodge W150. Popular National parts include:
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports
Multi Purpose Seal
from $14.99
(20)
Multi Purpose Seal
Axle Shaft Seals
Multi Purpose Seal
from $10.99
(19)
Multi Purpose Seal
Axle Shaft Seals

FAQs for 1990 Dodge W150 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1990 Dodge W150?

Out of 54 Drive Shafts and Axles for the 1990 Dodge W150, the most popular in our inventory are:
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Bearings
from $15.99
(9)
Bearings
Drive Shaft Bearings
Bearings
from $10.49
(4)
Bearings
Drive Shaft Bearings

What are the top-rated 1990 Dodge W150 Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1990 Dodge W150 based on customer reviews/ratings are:
Ball Bearing
from $19.99
(5)
Ball Bearing
“Easy Installation, Exact Fit”