1990 Dodge D150 Performance Engines
More 1990 Dodge D150 Performance Engines
Find your specific 1990 Dodge D150 original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1990 Dodge D150 Performance Engines
Edelbrock – Torker II Chrysler Big Block RB Intake Manifold (Part No.5091)
from
$373.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Available in cast or polished.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
Holley – Intake Manifold (Part No.300-14)
from
$410.99
Holley products have been the undisputed leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro-Stock champion. Holley’s products include performance fuel pumps, fuel injection, intake manifolds, cylinder heads & engine dress-up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies, Hooker Headers, Flowtech Headers, NOS, Weiand, or Earl’s, Holley products can give you the edge you need over the competition.
Product Features:
See More
Product Features:
- Single Plane Design
- Isolated Plenum
- Universal Carburetor Mounting Flange
- Power Band 1500-6500 rpm
- Height Front 4.13 in. Rear 5.25 in.
- Port Size 2.14 in./Height 1.12 in. Width
- 50 State Legal
Edelbrock – Torker II 340/360 Small Block Chrysler Intake Manifold (Part No.5076)
from
$425.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. Can be used on 318 cid if 340/360 heads used. Available in cast or polished.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- Can be Used on 318 cid if 340/360 Heads Used
Edelbrock – Performer Intake Manifold Small-Block Chrysler (Part No.3776)
from
$449.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-222-3)
from
$378.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-212-2)
from
$1093.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Edelbrock – Cylinder Head Gasket Set for Chrysler (Part No.7327)
from
$84.99
Edelbrock part #7327 head gasket is intended for Chrysler Magnum V8 engines. This gasket comes as a set and has a 4.140″ bore size, .048″ compressed thickness and 10.7 cc volume.
Product Features:
See More
Product Features:
- 4.14 in. Cylinder Bore Diameter
- 0.048 in. Thickness
- 10.70cc Volume
- Gray Color
- Two Piece Configuration
Edelbrock – Cylinder Head Gasket Set for Chrysler (Part No.7325)
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1008)
from
$41.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Edelbrock – Cylinder Head Gasket Set for Chrysler (Part No.7326)
Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)
from
$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated to resist corrosion and provide a clean professional appearance
- Made from Grade 5 steel for strength and durability
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Allen (socket) Head
- Zinc Plated For Protection
Edelbrock – Valve Cover Gasket Set for Chrysler (Part No.7593)
from
$29.99
Product Features:
See More
- 5/16 in. Thick
- Conforms to warped flanges, giving them better sealing capabilities
- Graphite-impregnated facing and steel expanded metal core
- Does not deteriorate or crack under excessive heat and pressure
- Sold as a pair
Edelbrock – Valve Cover Gasket Set for Chrysler (Part No.7591)
from
$44.99
Product Features:
See More
- 0.1875 in. Thickness
- Core-Reinforced-Composite Material
- For Late Model 1963-1980 BB Chrysler W/ 6-Bolt Valve Covers
- Set of 2
- Made In The USA
FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1611)
from
$20.29
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1608)
from
$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Mr. Gasket – Valve Cover Gasket Set (Part No.379)
from
$36.49
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track use
Edelbrock – Valve Cover Gasket Set for Chrysler (Part No.7592)
from
$28.99
Product Features:
See More
- 5/16 in. Thick
- Conforms to warped flanges, giving them better sealing capabilities
- Graphite-impregnated facing and steel expanded metal core
- Does not deteriorate or crack under excessive heat and pressure
- Sold as a pair
FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1607)
from
$18.99
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1806)
from
$21.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1808)
from
$17.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set (Part No.1807)
from
$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Popular 1990 Dodge D150 Performance Engines Categories
1990 Dodge D150 Performance Engines
Maybe you’re in the middle of a full rebuild of that 1990 Dodge D150. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 11 different Performance Engines in our inventory ranging from $17.49 to $1,093.99. That means you can find the exact parts or products you need to keep that 1990 Dodge D150 running smoothly.
Performance Engines are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Dodge D150. Mr. Gasket, FEL-PRO Performance, and Weiand are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Engines for your 1990 Dodge D150, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 12 reviews in this category, some of the top rated parts include Performance Valve Cover Gasket Set with 2.5 stars.
So if you’re in the market for aftermarket Performance Engines to keep your 1990 Dodge D150 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Engines Brands To Make Your 1990 Dodge D150 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Dodge D150 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your D150 the best it can be. Be sure to browse some of our top Performance Engines brands and parts.
Popular Mr. Gasket Performance Engines
We carry Mr. Gasket parts in our stock across Performance Engine Valve Cover Gasket Sets categories, plus more. For a 1990 Dodge D150, our most popular Mr. Gasket Performance Engines include:
FAQs for 1990 Dodge D150 Performance Engines
What are the most purchased Performance Engines for the 1990 Dodge D150?
Out of 11 Performance Engines for the 1990 Dodge D150, the most popular in our inventory are:
from
$17.49
This product is not rated
Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers
Performance Intake Manifold Hardware
from
$21.49
This product is not rated
PERFORMANCE OIL PAN GASKET SET
Performance Engine Oil Pan Gaskets
from
$37.49
This product is not rated
PERFORMANCE VALVE COVER GASKET SET
Performance Engine Valve Cover Gasket Sets
What are the top-rated 1990 Dodge D150 Performance Engines?
Top-rated Performance Engines for your 1990 Dodge D150 based on customer reviews/ratings are:
from
$18.99
(2)
Performance Valve Cover Gasket Set
“fits 1964-1991 with 5 bolts, rubber gasket lasts”
