1990 Chevrolet Corvette Valve Cover and Cylinder Heads
More 1990 Chevrolet Corvette Valve Cover and Cylinder Heads
Find your specific 1990 Chevrolet Corvette original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1990 Chevrolet Corvette Valve Cover and Cylinder Heads
Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72264)
from
$47.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
ARP Auto Racing – Hex Style Head, 1.8L Lb Per Square" Tensile Strength, Black Oxide, Chrome Moly (Part No.135-3601)
from
$106.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.
Product Features:
See More
Product Features:
- High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
- Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
- Rated At 180,000 PSI Tensile Strength
- High Performance Head Bolts Are Stronger
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26749 PT)
from
$73.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY NEXTGEN COATING TECHNOLOGY — Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
- UNIQUE COMBUSTION SEAL — Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
- MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- SUPERIOR SEAL — Precise embossed sealing beads at vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Fiber-Faced Composite, Without Head Bolts (Part No.7619 B)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Validated for fit, form, and function
- Unsurpassed quality you can trust
Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)
from
$15.99
Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.
Product Features:
See More
Product Features:
- Fits Chevy V8
- Standard Y Top 1/4 In-20 X 5/8 in L
- Chrome Plated Steel
- Overall Length: 4.64″
- Installed Length: 4.00″
- Pack of 4
Edelbrock – Hydraulic Roller Lifter for 1987 and Later S/B Chevy. (Part No.97385)
from
$34.99
Edelbrock part #97385 high performance hydraulic roller lifters for 1987 and later small-block Chevys are the perfect match for Edelbrock Rollin’ Thunder hydraulic roller cams. They are a drop-in replacement for 1987 and later blocks that accept factory r
Product Features:
See More
Product Features:
- Hydraulic Roller Lifter Type
- Steel Material
- No Tie Bar
- For Intake/Exhaust
- Sold Individually
Sealed Power – Engine Valve Lifter (Part No.AT-992)
from
$8.49
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Retro-fit performance
- High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
- Eliminates frequent lash adjustments
- Significant friction reduction substantially increases horsepower and fuel economy
- Delivers quieter engine operation
- Application-specific design for perfect fit and correct operation
Felpro – Cylinder Head Gasket Set (Part No.HS 26192 PT-3)
from
$282.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
Felpro – Cylinder Head Gasket Set (Part No.HS 7733 PT-1)
from
$50.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
Mr. Gasket – Valve Cover (Part No.9801)
from
$75.99
Chrome plated steel valve covers have a flat smooth top.
Product Features:
See More
Product Features:
- Fits 1960-1986 Chevy small block with perimeter bolt valve covers
- Tall-style covers provide extra clearance
- Chrome plated steel construction
- Sold as a pair
- Cadmium Plated To Resist Corrosion
- Easy Installation
Holley – Chrome Valve Cover (Part No.241-80)
from
$76.99
Dress up your engine with a new set of Holley custom valve covers.
Product Features:
See More
Product Features:
- Holley Embossed Logo
Sealed Power – Engine Exhaust Valve (Part No.V-1904)
from
$6.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Exhaust Valve (Part No.V-4345)
from
$14.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated stem
- Hard coating added to surface for strength & aiding in lubrication
- Note – coating added in varying thicknesses depending on application
- Innovative design, using leading edge materials
- Utilizes ISO & QS certified manufacturing
Competition Cams – SUPER VALVE LOCKS, 3/8" 1 ST (Part No.612-16)
from
$553.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights
Product Features:
See More
Product Features:
- For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
- Super Locks are recommended in all race applications
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)
from
$298.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Small Block Chevy
- Sold As A Kit
Edelbrock – Sure Seat Valve Springs for cylinder (Part No.5821)
from
$198.99
Product Features:
See More
- Non-Rotator Type
- 1.540 in. Outer Diameter
- 0.760 in. Inner Diameter
- 0.760 in. Coil Blind
- Set of 16
Sealed Power – Engine Valve Spring (Part No.VS-677)
from
$2.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Edelbrock – Sure Seat Valve Springs (Part No.5825)
from
$147.99
The Edelbrock #5825 Replacement Sure Seat Valve Spring for Edelbrock #5085, 60759, 60909, 60719, 60739, 60999, 60899 & 79899 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.
Product Features:
See More
Product Features:
- Non-Rotator Type
- 1.460 in. Outer Diameter
- Made In The USA
- Single Coil Spring Type
- Set of 16
ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)
from
$78.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 PSI
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Set of 16
- .800″ Adjuster Thread Length
- 3/8-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
Edelbrock – RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Roller Cam (Part No.60455)
from
$1223.99
The Edelbrock #60455 Performer RPM O-Port cylinder head is designed for Big-Block Chevy applications. The Edelbrock #60455 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance
Product Features:
See More
Product Features:
- Complete Single For Hydraulic Roller
- 110cc Combustion Chamber Volume
- 290cc Intake/110cc Exhaust Runner Volume
- 2.19 in. Intake/1.88 in. Exhaust Valve Diameter
- 0.562 in. Deck Thickness
Spartan – Engine Cylinder Head; GM 6.0/6.2 10-19 OHV Head (Part No.2CT13)
from
$651.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Edelbrock – E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam (Part No.60989)
from
$891.99
Product Features:
See More
- 64cc combustion chamber with 200cc intake runner
- 2.02 in. intake and 1.60 in. exhaust valves
- Flat Tappet Camshaft Type
- Exhaust And Intake 45 Degree Seat Angle
- Sold as one complete head
Edelbrock – RPM Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet Cam (Part No.60899)
from
$1192.99
Product Features:
See More
- Out-of-the-Box Bolt-On Performance
- With Straight Plugs
- 64cc Combustion Chambers Improve Performance
- Retain Stock Compression Ratio
Sealed Power – Engine Push Rod (Part No.RP-3182)
from
$2.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Competition Cams – PUSHRODS, BBC HIGH ENERGY INT & EXH 1 ST (Part No.7854-16)
from
$59.99
High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RVs and daily drivers. High Energy Pushrods have a durable one-piece construction that meets or exceeds all OE pushrod specifications and fit perfectly with High Energy and Magnum Rocker Arms.
Product Features:
See More
Product Features:
- 3/8″ Diameter, 8.280″ intake length (qt. 8), 9.252″ exhaust length (qt.8) for Big Block Chevy 396-454, ’65-’86
- Best choice when building street rods, RVs or daily drivers
- Meet or exceed all OE pushrod specifications
- Mate perfectly with High Energy and Magnum Rockers
- Durable one-piece construction
Edelbrock – Pushrod Set for S/B Chevy (Part No.9653)
from
$191.99
Edelbrock part #9653 Pushrods are designed for Chevy 348/409 “W” series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precis
Product Features:
See More
Product Features:
- 7.2 in. Length
- 0.312 in. Diameter
- 4130 Chromoly Steel Material
- Black Oxide Finish
- Made In The USA
Sealed Power – Engine Push Rod (Part No.RP-3349)
from
$6.29
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Popular 1990 Chevrolet Corvette Valve Cover and Cylinder Heads Categories
1990 Chevrolet Corvette Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 1990 Chevrolet Corvette. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 32 different Valve Cover and Cylinder Heads in our inventory ranging from $0.43 to $1,192.99. That means you can find the exact parts or products you need to keep that 1990 Chevrolet Corvette running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Chevrolet Corvette. Sealed Power, FELPRO, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1990 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 97 reviews in this category, some of the top rated parts include Engine Push Rod with 5.0 stars and Engine Valve Spring Retainer Keeper with 5.0 stars.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1990 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 1990 Chevrolet Corvette Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Edelbrock Valve Cover and Cylinder Heads
We carry Edelbrock parts in our stock across Engine Valve Springs categories, plus more. For a 1990 Chevrolet Corvette, our most popular Edelbrock Valve Cover and Cylinder Heads include:
Top 1990 Chevrolet Corvette Valve Cover and Cylinder Heads from Felpro
Felpro products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 1990 Chevrolet Corvette. Popular Felpro parts include:
FAQs for 1990 Chevrolet Corvette Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 1990 Chevrolet Corvette?
Out of 32 Valve Cover and Cylinder Heads for the 1990 Chevrolet Corvette, the most popular in our inventory are:
What are the top-rated 1990 Chevrolet Corvette Valve Cover and Cylinder Heads?
Top-rated Valve Cover and Cylinder Heads for your 1990 Chevrolet Corvette based on customer reviews/ratings are:
from
$2.99
(2)
Engine Push Rod
“1986-1990 GM 4.3L Understand this headline or you’ll need 12 of these beauties. Not always covered in manuals. 48 hours and I had these in hand with f”
