1990 Chevrolet C3500 Drivetrains
More 1990 Chevrolet C3500 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1990 Chevrolet C3500, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1990 Chevrolet C3500 Drivetrains
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
Yukon Gear – Minor Install Kit For Dana 80 Differential (4.125" O.D – Pinion Race) (Part No.12030)
from
$188.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
- Included are a pinion seal, complete shim kit, marking compound and brush.
Felpro – Differential Cover Gasket (Part No.RDS 55063)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Bearing Race Driver (Part No.56018)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM903210 race
- All steel construction
National – Multi Purpose Seal (Part No.5200)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles (Part No.16044)
from
$315.99
Yukon standard open spider gear kit for GM 10.5″ and 14T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM 10.5″ 14 bolt truck open differential
- Includes two side gears, four pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Dorman – Spindle Washer – I.D. 20.1mm O.D. 44.0mm Thickness 2.6mm (sold by each) (Part No.618-032)
from
$2.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Multi Purpose Bearing (Part No.HB-88532)
from
$162.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Replacement Outer Oil Slinger For Dana 80 (Part No.33018)
Dorman – Help – Auto Transmission Case Vent (Part No.14689)
from
$6.99
This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles
- Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Gear Install Kit (Part No.D70IK)
Dorman – Help – U-Joint Repair Assortment 2 Pc (Part No.81020)
from
$16.29
This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – AxleHubBolt (Part No.33583)
from
$5.99
AxleHubBolt
Motive Gear – Differential Carrier (Part No.6258340)
Yukon Gear – Differential Cover B (Part No.33572)
from
$7.99
Differential Cover B
Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)
from
$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Steel Spool For Dana 80 With 35 Spline Axles, 4.10 & Up (Part No.32172)
from
$747.99
Yukon Performance steel spool for 8Dana 80 with 35 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler Dana Spicer 80 with 35 spline axles
- 4.10 and up ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Crush Sleeve Eliminator Kit For GM 10.5" 14 Bolt Truck (Part No.55067)
from
$121.99
Crush sleeve eliminator kit for GM 10.5″ 14 bolt truck. This kit contains a solid spacer & shim kit to eliminate the crush sleeve and set pinion bearing preload.
Product Features:
See More
Product Features:
- Crush sleeve eliminator kit for GM 10.5″ 14 bolt truck
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)
from
$13.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2002
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 3.50 INCH / 89 MM
- MOUNT WIDTH: 1.50 INCH / 38 MM
- COMPLETE MOUNT
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-762)
from
$1009.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Yukon Gear – Yoke For GM 10.5" 14 Bolt Truck, 1410, Strap Style (Part No.41180)
from
$299.99
Yukon yoke for GM 10.5″ 14 bolt truck, 1410, strap style. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 10.5″ 14 bolt truck
- 30 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Driveworks – Tapered Roller Bearing (Part No.S-HM-903210)
Powertrax – No-Slip Traction System (Part No.9207053000)
from
$591.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
aFe POWER – Differential Cover (Part No.46-70372)
from
$355.99
aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable A356-T6 cast aluminum with reinforcing ribs for maximum strength. Mounting hardware is included for a hassle-free installation. An oil level sight glass and calibration plug set to the factory level prevents overfilling of the differential. A magnetic drain plug and a deep reach magnetic fill plug are provided for maximum protection. This cover is finished in black powder-coating with machined fins for a distinctive look. 4 Quart Gear Oil Capacity: This cover has about a 4 quart gear oil capacity at the factory fill level, factory cover holds about 3 quarts. Built-in External Fins: Built-in external fins transfer heat from the fluid to the outside air for maximum cooling. Magnetic Drain/Fill Plug: This system incorporates a magnetic drain and deep reach fill plug that captures loose particles for maximum rear-end protection. Oil Level Sight Glass: Large oil level sight glass with 1/8” NPT calibration plug set to the factory fluid level to eliminate overfilling. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.
Product Features:
See More
Product Features:
- Constructed of Durable A356 Die Cast Aluminum
- Reinforcing Ribs and Black Powder coating w/Machined Fins
- Magnetic Drain and Fill Plugs Capture Loose Particles
- Large Oil Level Sight Glass w/ Calibration Plug
National – Bearings (Part No.307-FFL5)
from
$77.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Pro-King – Differential Internal Nest Kit (Part No.743B717)
from
$221.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Pro-King – Differential Internal Nest Kit (Part No.744A717)
from
$323.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Popular 1990 Chevrolet C3500 Drivetrains Categories
1990 Chevrolet C3500 Drivetrains
You count on your 1990 Chevrolet C3500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 272 Drivetrains ranging in price from $1.89 to $1,374.99, you’re sure to find everything you need for your 1990 Chevrolet C3500.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 18 different brands like Valvoline, Moog, and Driveworks. 1990 Chevrolet C3500 Drivetrains start as low as $1.89!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,220 extensive product reviews on 1990 Chevrolet C3500 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Premium Universal Joint with 4.0 stars and Multi Purpose Bearing with 3.4 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1990 Chevrolet C3500 below to get started!
Top-Rated Drivetrains Brands For Your 1990 Chevrolet C3500
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1990 Chevrolet C3500 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1990 Chevrolet C3500 back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1990 Chevrolet C3500 Drivetrains
What are the most purchased Drivetrains for the 1990 Chevrolet C3500?
Out of 272 Drivetrains for the 1990 Chevrolet C3500, the most popular in our inventory are:
What are the top-rated 1990 Chevrolet C3500 Drivetrains?
Top-rated Drivetrains for your 1990 Chevrolet C3500 based on customer reviews/ratings are:
