1990 Chevrolet Beretta Performance and Racing Products

Essential Performance and Racing Products for 1990 Chevrolet Berettas

Hypertech – ThermoMaster Power Computer Chip (Part No.120622)

ThermoMaster Power Computer Chip

from

$214.49
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:
  • Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
  • Controls Engines Air/Fuel Ratio
  • Controls Spark Advance For Max Power
  • Potential Gas Mileage Improvements
  • No Wiring Or Soldering Required
  • Installs In Less Than 30 Minutes
  • Product might not be available in all states due to local laws.
See More

Hypertech – ThermoMaster Power Chip (Part No.128832)

ThermoMaster Power Chip

from

$168.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:
  • Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
  • Controls Engines Air/Fuel Ratio
  • Controls Spark Advance For Max Power
  • Potential Gas Mileage Improvements
  • No Wiring Or Soldering Required
  • Installs In Less Than 30 Minutes
  • Product might not be available in all states due to local laws.
See More

MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)

Coil; GM Coil Pack; 2 Tower Style

from

$76.99
The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.

Product Features:
  • Direct performance replacement
  • For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
  • 80:1 turns ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
  • CARB E.O. Approved
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)

50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound

from

$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Edelbrock – Concealed Nitrous Kits for EFI Applications (20-30 Hp) (Part No.70028)

Concealed Nitrous Kits for EFI Applications (20-30 Hp)

from

$388.99


Product Features:
  • Easily Concealable
  • Install In Minutes
  • Quick Removal
  • No Obvious Signs Of Installation
  • No Obvious Signs Of Use
See More

Edelbrock – Universal Performer EFI Dry Systems for 4, 6 And 8 Cylinder Engine (50-70 Hp) (Part No.71006)

Universal Performer EFI Dry Systems for 4, 6 And 8 Cylinder Engine (50-70 Hp)

from

$926.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
  • Detailed Instructions
See More

Hypertech – Street Runner Power Computer Chip, with Overdrive (Part No.123401)

Street Runner Power Computer Chip, with Overdrive

from

$204.49
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.

Product Features:
  • Designed For Daily Street Driving
  • For Unmodified Vehicles w/Stock Thermostat
  • Controls Engines Air/Fuel Ratio
  • Controls Spark Advance For Max Power
  • Potential Gas Mileage Improvements
  • No Wiring Or Soldering Required
  • Installs In Less Than 30 Minutes
  • Product might not be available in all states due to local laws.
See More

Hypertech – ThermoMaster Power Chip (Part No.153432)

ThermoMaster Power Chip

from

$214.49
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:
  • Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
  • Controls Engines Air/Fuel Ratio
  • Controls Spark Advance For Max Power
  • Potential Gas Mileage Improvements
  • No Wiring Or Soldering Required
  • Installs In Less Than 30 Minutes
See More

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Mr. Gasket – Starter Motor Heat Shield (Part No.3678)

Starter Motor Heat Shield

from

$43.99
Fits Chevy small block 265-400 CID, Chevy big block 396-454 CID, & 90 degree Chevy V6. The Starter Motor Heat Shield is built with heat-resistant material sandwiched between two aluminum plates. The shield protects the starter from heat buildup from the exhaust system, especially important when using headers.

Product Features:
  • Designed to prevent starter overheat due to extreme exhaust temperature
  • Heat resistant material sandwiched between 2 aluminum plates
  • Protects Starter From High Temperatures
  • Made Of 2 Sheets Of Aluminum Heat Resistant Center
  • Natural Finish
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2022)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$54.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Edelbrock – Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP) (Part No.71008)

Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP)

from

$842.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
See More

Edelbrock – Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit (Part No.71884)

Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit

from

$266.99
Product Features:
  • Wet To Dry Conversion System
  • Hose Included
  • Includes Fittings
  • Includes Solenoid
  • Includes All Necessary Installation Items
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$40.99
Brake Bleeder Screws

Earls Performance Product – Brake Bleeder Screws (Part No.280022ERL)

Brake Bleeder Screws

from

$32.59
Brake Bleeder Screws

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Energy Suspension – High Performance Sway Bar End Link Kit with Hardware (Part No.9.8117R)

High Performance Sway Bar End Link Kit with Hardware

from

$26.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

Product Features:
  • Made from HYPER-Flex Polyurethane
  • Allows Vehicle to Work At Maximum Efficiency
  • Easy to Install
  • Superior Performance and Greater Longevity
  • Lasts Much Longer Than OEM Rubber End Links
See More

Upgrade your 1990 Chevrolet Beretta with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1990 Chevrolet Beretta, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Beretta functioning at its best. At Advance Auto Parts, we offer a wide selection of 28 Performance and Racing Products for the 1990 Chevrolet Beretta, designed to meet your needs without breaking the bank. From Performance Steering Product replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1990 Chevrolet Beretta at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $926.99, with an average price of $250.01. Our 28 Performance and Racing Products in stock come from 11 trusted brands, so you’re sure to find the right part for your 1990 Chevrolet Beretta without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Chevrolet Beretta, we stock popular OEM and aftermarket Performance and Racing Products from top names like Energy Suspension, MSD Ignition, Mr. Gasket, and more. Energy Suspension Performance and Racing Products start at just $9.99 and boast an impressive 4 stars average rating from customers. MSD Ignition and Mr. Gasket also bring quality to the table, with Performance and Racing Products available starting at $43.99, and at an average 4 stars rating. With 113 customer reviews and counting, our 1990 Chevrolet Beretta Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Chevrolet Beretta is always ready to roll. We’re committed to providing you with everything you need to keep your Beretta in top shape, all in one place. Start shopping confidently below for your 1990 Chevrolet Beretta!

Best-Selling Performance Steering Products for 1990 Chevrolet Berettas

Enhance the driving experience in your Chevrolet with 2 quality Performance Steering Product components, starting at $9.99.

Energy Suspension – High Performance Sway Bar End Link Kit with Hardware (Part No.9.8117R)

High Performance Sway Bar End Link Kit with Hardware

from

$26.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

Product Features:
  • Made from HYPER-Flex Polyurethane
  • Allows Vehicle to Work At Maximum Efficiency
  • Easy to Install
  • Superior Performance and Greater Longevity
  • Lasts Much Longer Than OEM Rubber End Links
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Most Popular 1990 Chevrolet Beretta Performance Engines

Customize your Chevrolet with 1 Performance Engines products like Performance Torque Converters, all priced under $665.99.

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Top Picks for 1990 Chevrolet Beretta Performance Exhaust Products

Upgrade Chevrolet Berettas with top-quality Performance Exhaust Products parts, including 1 OEM and aftermarket selections for your 1990 model.

Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)

50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound

from

$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

In-Demand Performance Air Filters for 1990 Chevrolet Berettas

Select from 1 premium Performance Air Filters parts for your 1990 Chevrolet Beretta.

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2022)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$54.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Most Sold 1990 Chevrolet Beretta Performance Ignition Products

Explore our best-selling Chevrolet parts for the 1990 Beretta among 6 OEM and aftermarket options starting from $65.99.

MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)

Coil; GM Coil Pack; 2 Tower Style

from

$76.99
The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.

Product Features:
  • Direct performance replacement
  • For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
  • 80:1 turns ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
  • CARB E.O. Approved
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

Coil; GM External HEI Coil; High Performance

from

$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:
  • Direct performance replacement for GM dual connector coil
  • 100:1 Turns Ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
See More

MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation

from

$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:
  • Replacement Coil For GM Dual Connector Coil
  • Improved Turns Ratio
  • Lower Primary Resistance
  • Bolt-In replacement coil
  • Produce More Output Voltage
  • Smooth Idle
See More

Accel – GM 86-99 Dis Supercoil (Part No.140017)

GM 86-99 Dis Supercoil

from

$72.99
Re-engineered to be the only true performance AC/Delco style DIS coil. “”Raised Dome”” construction, section bobbin technology, highly specialized silicone magnetic steel core, optimized windings, resistance, and turns ratio result in higher energy and voltage outputs, and longer dwell. Compatible with OE computer controlled ignition systems as well as Crane or MSD capacitive discharge DIS ignition systems. Brass contact increases energy transfer and resists corrosion better than aluminum. High dielectric strength “”ACCEL Yellow”” over molded housing. Packaged as single unit: 4 cyls require 2 coils, 6 cyls require 3 coils and 8 cyls require 4 coils.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP Dr-39
  • MSD 8224
  • Resist Corrosion
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Top-Rated Performance and Racing Products Brands For Your 1990 Chevrolet Beretta

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1990 Chevrolet Berettas. Below you’ll find some of our best rated Performance and Racing Products from Energy Suspension, MSD Ignition, and Mr. Gasket, and more. Performance and Racing Products from these brands that fit a 1990 Beretta start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Energy Suspension 1990 Chevrolet Beretta Performance and Racing Products

When it comes to maintaining or upgrading your 1990 Chevrolet Beretta, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Energy Suspension ticks all of those boxes. We offer a wide selection of Energy Suspension Performance and Racing Products, specifically designed for the 1990 Chevrolet Beretta. With over 2 Energy Suspension brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.99, with an average price of just $18.49. Plus, with over 10 customer reviews and an average rating of 4 stars, you can trust that our Energy Suspension Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

High Performance Sway Bar End Link Kit with Hardware
from
$26.99

(7)

High Performance Sway Bar End Link Kit with Hardware

“A +++++++++++++++”

Tie Rod Dust Boot
from
$9.99

(3)

Tie Rod Dust Boot

“Replaced the old torn boot and added a bit of color for a low cost.”

Popular MSD Ignition 1990 Chevrolet Beretta Performance and Racing Products

MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1990 Chevrolet Beretta owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1990 Beretta, Advance Auto Parts carries a full inventory of 3 MSD Ignition Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range from $65.99 to $76.99, plus, with more than 11 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

Coil; GM Coil Pack; 2 Tower Style
from
$76.99

(1)

Coil; GM Coil Pack; 2 Tower Style

“These are easy to install. I suggest getting the ignition controller as well. The mounts are necessary for that.”

Coil; GM External HEI Coil; High Performance
from
$71.99

(3)

Coil; GM External HEI Coil; High Performance

“This product is great, I also installed the msd cap and rotor and an msd ingnition 6a These products togeather create performace and a little more pow”

FAQs for 1990 Chevrolet Beretta Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1990 Chevrolet Berettas?

Out of 28 Performance and Racing Products that fit 1990 Chevrolet Berettas, the following parts are the top sellers:

What’s the price range for 1990 Chevrolet Beretta Performance and Racing Products?

Performance and Racing Product prices for the 1990 Chevrolet Beretta start at $9.99 and go up to $926.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1990 Chevrolet Beretta?

The average price for Performance and Racing Products for the 1990 Chevrolet Beretta is $250.01. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Beretta model years?

Yes, we currently carry Performance and Racing Products for 9 model years of Chevrolet Berettas between 1987 and 1996. Performance and Racing Products are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1989, 1988, and 1987.

What are the cheapest Performance and Racing Products for my 1990 Chevrolet Beretta?

The cheapest 1990 Chevrolet Beretta Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1990 Chevrolet Beretta?

Out of 113 reviews by customers, our 1990 Chevrolet Beretta Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1990 Chevrolet Beretta and their top-rated products:

What types of Performance and Racing Products do you sell for my 1990 Chevrolet Beretta?

Can I get help with 1990 Chevrolet Beretta Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet Beretta Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Beretta Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.