1989 White/GMC WCA Belts and Hoses

Name: Curved Radiator Hose
Brand: Dayco
SKU: D71757
Price: 13.99 USD

Below you will find various in-demand White/GMC Belts and Hoses, components and accessories for your 1989 WCA. Advance Auto Parts has popular WCA parts like Serpentine and V Belts, Radiator Hoses, Engine Cooling Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other WCA model years including 1988, 1990, 1991, 1992, 1993, 1994, 1995 and more. Select a category of 1989 White/GMC WCA Belts and Hoses below and start saving instantly.

Popular 1989 White/GMC WCA Belts and Hoses Categories

Essential Belts and Hoses for 1989 White/GMC WCAs

from

$13.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$38.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$37.99

Product Features:

Engineered to resist electrochemical degradation, the leading cause of hose failure
Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
EPDM tube and Neoprene cover for extended service life
Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
Resistant to heat, oil and ozone
Performs to SAE 20R5 Type EC Class D-2 specifications
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transfer applications
Caution: Do not use for fuel or oil transfer applications.

from

$15.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$20.29

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$32.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$30.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$66.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$56.99

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$54.99

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$18.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$2.99

Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:

Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
Engineered with compounds that resist electrochemical degradation
Approved for marine applications
Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: For a maintenance free connection, use PowerGrip SB clamps
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the inch. See store for details.

from

$8.79

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$26.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$24.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$13.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$1.49

Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:

Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
Engineered with compounds that resist electrochemical degradation
Approved for marine applications
Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: For a maintenance free connection, use PowerGrip SB clamps
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the inch. See store for details.

from

$52.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$28.99

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$36.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$50.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$55.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$23.99

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$43.99

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$49.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$24.49

Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$37.49

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

Upgrade your 1989 White/GMC WCA with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1989 White/GMC WCA, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your White/GMC or enhancing its overall performance, Belts and Hoses are key to keeping your WCA functioning at its best. At Advance Auto Parts, we offer a wide selection of 55 Belts and Hoses for the 1989 White/GMC WCA, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1989 White/GMC WCA at great prices. Our Belts and Hoses inventory for this model ranges from just $2.99 to $84.99, with an average price of $35.20. Our 55 Belts and Hoses in stock come from 3 trusted brands, so you’re sure to find the right part for your 1989 White/GMC WCA without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 White/GMC WCA, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Driveworks, and more. Dayco Belts and Hoses start at just $8.79 and boast an impressive 5 stars average rating from customers. With 84 customer reviews and counting, our 1989 White/GMC WCA Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Fluids and Chemicals, Wipers and Related Products and more to make sure your 1989 White/GMC WCA is always ready to roll. We’re committed to providing you with everything you need to keep your WCA in top shape, all in one place. Start shopping confidently below for your 1989 White/GMC WCA!

Best-Selling Serpentine and V Belts for 1989 White/GMC WCAs

Enhance the driving experience in your White/GMC with 47 quality Serpentine and V Belt components, starting at $2.99.

show more show less

from

$15.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$5.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$5.09

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$4.09

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

Made with a fabric reinforced base material; this v-belt has the strength and stability required for long term performance on all v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$24.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$28.99

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$21.29

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses.
áDesigned for efficient power transmission to vehicle accessories in today’s trucks and buses.
Provides greater durability and flexibility 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$15.79

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$24.49

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$27.49

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$42.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$27.49

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$36.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$31.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$15.49

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$23.99

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$25.49

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$75.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$56.99

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$43.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$34.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$21.99

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$74.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$46.99

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$49.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$43.99

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$26.99

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$23.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$84.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$75.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$60.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$59.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$55.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$54.99

Engineered to handle operating conditions with temperatures up to 130°C (266°F)
Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
Capable of delivering excellent performance in high torque and high power pulse applications
Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

from

$47.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$46.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$46.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$42.49

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$40.99

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$36.99

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$34.99

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$31.49

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$31.49

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$5.29

Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.

Product Features:

Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
No-Noise Advanced Design EPDM rubber compound for quiet extended life

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$2.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

Top Picks for 1989 White/GMC WCA Engine Cooling Hoses

Upgrade White/GMC WCAs with top-quality Engine Cooling Hoses parts, including 3 OEM and aftermarket selections for your 1989 model.

show more show less

from

$15.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$32.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$20.29

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

Top-Rated Belts and Hoses Brands For Your 1989 White/GMC WCA

Shop for the best-rated brands offering Belts and Hoses and other products for your 1989 White/GMC WCAs. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 1989 WCA start at just $2.99 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 1989 White/GMC WCA Belts and Hoses

When it comes to maintaining or upgrading your 1989 White/GMC WCA, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1989 White/GMC WCA. With over 19 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.79, with an average price of just $27.40. Plus, with over 19 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$21.29

This product is not rated

Bottom Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality

“”

from
$24.49

This product is not rated

Bottom Cog V-Belt: 47" Long, Exact Fit Premium Quality

“”

from
$15.79

This product is not rated

Automotive RPF Raw Edge Cogged Belt

“”

Popular Driveworks 1989 White/GMC WCA Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 1989 White/GMC WCA owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1989 WCA, Advance Auto Parts carries a full inventory of 8 Driveworks Belts and Hoses. Plus you will be keeping your White/GMC in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $2.99 to $15.79, plus, with more than 9 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$4.99

This product is not rated

Automotive V-Belt

“”

from
$4.99

This product is not rated

Automotive V-Belt, Driveworks

“”

from
$5.29

This product is not rated

Poly Rib Belt Serpentine Belt; 60.5 Long, 6 Rib Count

“”

FAQs for 1989 White/GMC WCA Belts and Hoses

Which Belts and Hoses are best-sellers for 1989 White/GMC WCAs?

Out of 55 Belts and Hoses that fit 1989 White/GMC WCAs, the following parts are the top sellers:

Bottom Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality (19270487) – $21.29
Automotive RPF Raw Edge Cogged Belt (3300109) – $15.79
Bottom Cog V-Belt: 47" Long, Exact Fit Premium Quality (19270488) – $24.49

What’s the price range for 1989 White/GMC WCA Belts and Hoses?

Belts and Hose prices for the 1989 White/GMC WCA start at $2.99 and go up to $84.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1989 White/GMC WCA?

The average price for Belts and Hoses for the 1989 White/GMC WCA is $35.20. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other White/GMC WCA model years?

Yes, we currently carry Belts and Hoses for 7 model years of White/GMC WCAs between 1988 and 1995. Belts and Hoses are bought most frequently for the following model years: 1995, 1994, 1993, 1992, 1991, 1990, and 1988.

What are the cheapest Belts and Hoses for my 1989 White/GMC WCA?

The cheapest 1989 White/GMC WCA Belts and Hoses we carry in stock are:

Automotive V-Belt, Driveworks (10065851) – $2.99
Green Stripe« 2-Ply Straight Coolant Hose (10521360) – $2.99
Automotive V-Belt, Driveworks (10065191) – $4.09
Automotive V-Belt, Driveworks (5061660) – $4.99
Automotive V-Belt (5060486) – $4.99

What are the top-rated Belts and Hoses that fit the 1989 White/GMC WCA?

Out of 84 reviews by customers, our 1989 White/GMC WCA Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1989 White/GMC WCA and their top-rated products:

Serpentine and V Belts
- Automotive V-Belt (5061628) – $5.09
- Automotive V-Belt, Driveworks (10065191) – $4.09
- Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count (5062160) – $15.79

What types of Belts and Hoses do you sell for my 1989 White/GMC WCA?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1989 White/GMC WCA:

Can I get help with 1989 White/GMC WCA Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about White/GMC Belts and Hoses and more.

What is your return policy for White/GMC WCA Belts and Hoses?

Advance Auto Parts keeps returns simple. For new White/GMC WCA Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1989 White/GMC WCA Belts and Hoses

Dayco – Curved Radiator Hose (Part No.D71757)

Gates – Premium Molded Coolant Hose (Part No.21194)

Gates – Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter (Part No.26508)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4" Long, 2.25" Diameter (Part No.B71729)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.31" Long, 2.25" Diameter (Part No.C72139)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.50" Long, 2.25" Diameter (Part No.E71073)

Dayco – Poly Rib Belt Serpentine Belt; 34.06 Long, 5 Rib Count (Part No.5050340)

Gates – Micro-V« Serpentine Drive Belt (Part No.K080570)

Dayco – Poly Rib Belt HD Serpentine Belt; 57.09 Long, 8 Rib Count, Heavy Duty (Part No.5080570)

Dayco – Poly Rib Belt HD Serpentine Belt; 52.56 Long, 8 Rib Count, Heavy Duty (Part No.5080525)

Driveworks – Poly Rib Belt Serpentine Belt; 34.06 Long, 5 Rib Count (Part No.340K5)

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24232)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, 1" Diameter (Part No.C71218)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 2.50" Diameter (Part No.E70922)

Dayco – Flex Radiator Hoses; EPDM Rubber, 12.25 Inch Long, 2 Inch Inner Dia. (Part No.81411)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7" Long, 2.25" Diameter (Part No.B71010)

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24220)

Gates – Molded Heater Hose: EPDM, Direct Fit, 2.5" Inside Diameter (Part No.21135)

Dayco – Bottom Cog V-Belt; 57 Inch Long, Exact Fit Premium Quality (Part No.17570)

Gates – Automotive XL« High Capacity V-Belt (Part No.9550)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9530HD)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9570HD)

Dayco – Double Cog V-Belt; 57 Inch Long, Exact Fit Premium Quality (Part No.22570)

Gates – Automotive XL« High Capacity V-Belt (Part No.9570)

Driveworks – Automotive V-Belt (Part No.50017)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9585HD)

Dayco – Bottom Cog V-Belt: 47" Long, Exact Fit Premium Quality (Part No.17470)

Gates – Notched V-Belt: 53.61" Long, 1 Strand, Exact Fit (Part No.9530)

Driveworks – Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count (Part No.350K5)

Driveworks – Automotive V-Belt (Part No.45017)

Driveworks – Automotive V-Belt (Part No.57017)

Driveworks – Automotive V-Belt, Driveworks (Part No.46317)

Dayco – Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count (Part No.5050350)

Dayco – Bottom Cog V-Belt; 57 Inch Long, Exact Fit Premium Quality (Part No.17570)

Dayco – Bottom Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality (Part No.17463)

Dayco – Automotive RPF Raw Edge Cogged Belt (Part No.17450)

Dayco – Bottom Cog V-Belt: 47" Long, Exact Fit Premium Quality (Part No.17470)

Dayco – Bottom Cog V-Belt; 54 Inch Long, Exact Fit Premium Quality (Part No.17540)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9580HD)

Dayco – V-Belt, Top Cog (Part No.17525)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9560HD)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9485HD)

Dayco – Bottom Cog V-Belt; 42.5 Inch Long, Exact Fit Premium Quality (Part No.17425)

Dayco – Double Cog V-Belt; 57 Inch Long, Exact Fit Premium Quality (Part No.22570)

Dayco – Bottom Cog V-Belt: 50" Long, Exact Fit Premium Quality (Part No.17500)

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K080585HD)

Dayco – Poly Rib Belt HD Serpentine Belt; 58.5 Long, 8 Rib Count, Heavy Duty (Part No.5080585)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9380HD)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9490HD)

Dayco – Double Cog V-Belt; 64.5 Inch Long, Exact Fit Premium Quality (Part No.22645)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 57" Long, 8 Rib Count, Exact Fit (Part No.K080565HD)

Dayco – Poly Rib Belt HD Serpentine Belt; 56.5 Long, 8 Rib Count, Heavy Duty (Part No.5080565)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9585HD)

Gates – Automotive XL« High Capacity V-Belt (Part No.9570)

Gates – Automotive XL« High Capacity V-Belt (Part No.9560)

Gates – Micro-V« Serpentine Drive Belt (Part No.K050350)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 53.169" Long, 8 Rib Count, Exact Fit (Part No.K080525HD)

Gates – V-Ribbed Serpentine Belt: 53.169" Long, 8 Rib Count, Exact Fit (Part No.K080525)

Gates – V-Ribbed Serpentine Belt: 59.024" Long, 8 Rib Count, Exact Fit (Part No.K080585)

Gates – Micro-V« Serpentine Drive Belt (Part No.K080565)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9570HD)

Dayco – Poly Rib Belt HD Serpentine Belt; 52.56 Long, 8 Rib Count, Heavy Duty (Part No.5080525)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9550HD)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9540HD)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9565HD)

Gates – Automotive XL« High Capacity V-Belt (Part No.9565)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9463HD)

Gates – Automotive XL« High Capacity V-Belt (Part No.9550)

Gates – Automotive XL« High Capacity V-Belt (Part No.9540)

Gates – Automotive XL« High Capacity V-Belt (Part No.9380)

Gates – Automotive XL« High Capacity V-Belt (Part No.9485)

Driveworks – Poly Rib Belt Serpentine Belt; 60.5 Long, 6 Rib Count (Part No.54017)

Driveworks – Automotive V-Belt, Driveworks (Part No.47017)

Driveworks – Automotive V-Belt (Part No.50017)

Driveworks – Automotive V-Belt, Driveworks (Part No.42517)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12.50" Long, 1" Diameter (Part No.C71218)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 2.50" Diameter (Part No.E70922)

Gates – Molded Heater Hose: EPDM, Direct Fit, 2.75" Inside Diameter (Part No.21939)

Gates – Molded Heater Hose: EPDM, Direct Fit, 2.5" Inside Diameter (Part No.21135)