1989 Volvo 245 Drivetrains
More 1989 Volvo 245 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1989 Volvo 245, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1989 Volvo 245 Drivetrains
Yukon Gear – Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25" (Part No.55014)
from
$17.99
Yukon 1541H alloy right hand rear axle for Model 35 (drum brakes) with a 54 tooth, 2.7″ ABS ring. axle has a length of 29-1/4″ inches and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H allo
Product Features:
See More
Product Features:
- Pinion depth shims for AMC Model 35 and Chrysler 7.25″
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
Yukon Gear – Replacement Chrome Cover For Dana 30 Standard Rotation (Part No.32003)
Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)
from
$162.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits Dana Spicer 25, 27, 30, 4 and 50
Yukon Gear – Pump Up Kit, Zip Locker (Part No.34031)
from
$174.99
Pump up kit, Zip Locker.
Product Features:
See More
Product Features:
- Tire pump up kit
- Includes hose, fittings, couplers and teflon tape
Professional Parts Sweden – Freeze Plug (Part No.A1030392592PPS)
from
$3.42
Freeze Plug
National – Bearings (Part No.LM501314)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles (Part No.16073)
from
$155.99
Yukon replacement standard open spider gear kit for Dana 30 with 27 spline axles and with or without quick disconnect. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Dana Spicer 30 open differential with 27 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Bearings (Part No.M86647)
from
$24.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Universal Joint (Part No.DW-369)
from
$20.49
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Yukon Gear – Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size (Part No.41018)
from
$147.99
Yukon replacement yoke for Dana 30, 44, 50, and Dana 300 with 26 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Professional Parts Sweden – Driveshaft Support Spring (Part No.K1053390161PPS)
from
$2.74
The Professional Parts Sweden Driveshaft Support Spring is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rein – Power Steering Rack Boot Kit (Part No.BKK0086R)
from
$15.49
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific power steering boot kits come complete with everything needed to do a proper installation, including all the hardware needed for a guaranteed fit the first time.
See More
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
MTC – Driveshaft Support Washer (Part No.K105294653MTC)
from
$1.63
The MTC Driveshaft Support Washer is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Driveworks – Taper Bearing Set (Part No.S-A-17)
from
$9.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
USA Standard Gear – Spartan Locker for Dana 30 Differential with 27 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17000)
from
$602.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. Does not fit Std. JK Carrier. Use YC D706008
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 with 27 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Yukon Gear – High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 4.11 Ratio (Part No.24020)
from
$405.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 30 without crush sleeve
- 7.20″ ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 4.11 ratio
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$30.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Pinion Install Kit For Dana 30 Rear Differential (Part No.13017)
from
$233.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 rear
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Replacement Carrier Shim Kit For Dana 30 & 44 With 19 Spline Axles (Part No.55018)
from
$26.99
Product Features:
See More
- Carrier shim kit for Dana Spicer 30 and Dana Spicer 44 with 19 spline axles
Yukon Gear – Replacement Cross Pin Shaft For Standard Open Dana 30 (Part No.33316)
from
$12.99
Product Features:
See More
- Cross pin shaft for Dana Spicer 30
- Fits standard open differentials only
Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)
from
$6.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
- 3/4″ x 16 thread
Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)
from
$21.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
- Left hand thread
Popular 1989 Volvo 245 Drivetrains Categories
1989 Volvo 245 Drivetrains
You count on your 1989 Volvo 245 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 120 Drivetrains ranging in price from $1.63 to $1,303.99, you’re sure to find everything you need for your 1989 Volvo 245.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Yukon Gear, National, and DriveWorks. 1989 Volvo 245 Drivetrains start as low as $1.63!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 43 extensive product reviews on 1989 Volvo 245 Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 5.0 stars and Greaseable Premium Universal Joint with 4.7 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1989 Volvo 245 below to get started!
Top-Rated Drivetrains Brands For Your 1989 Volvo 245
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Volvo 245 running right for years to come. In our inventory you’ll find brands like Yukon Gear, National, DriveWorks, and even more.
Popular Driveworks Drivetrains
You’ll find popular Driveworks brand products across Drive Shafts and Axles. All are waiting to get your 1989 Volvo 245 back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1989 Volvo 245, and some of our most reviewed National parts include:
FAQs for 1989 Volvo 245 Drivetrains
What are the most purchased Drivetrains for the 1989 Volvo 245?
Out of 120 Drivetrains for the 1989 Volvo 245, the most popular in our inventory are:
from
$11.99
This product is not rated
Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24
Differential Ring Gear Bolts
from
$9.99
This product is not rated
Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt
Differential Cover Bolts
What are the top-rated 1989 Volvo 245 Drivetrains?
Top-rated Drivetrains for your 1989 Volvo 245 based on customer reviews/ratings are:
from
$37.99
(3)
Greaseable Premium Universal Joint
“Perfect for rebuilding front (3 needed) & rear (1 needed) driveshafts on the Land Rover Discovery II. Made in the USA, keep them greased and the last ”
from
$39.99
(1)
Shaft Repair Sleeve
“used these speedy sleeves on the front axle of my Kubota with the wheel seals,saved me from spending 15 times more on the axle’s, Thank’s”
