1989 Toyota Corolla Engine Parts
Find Your Specific 1989 Toyota Corolla Engine Parts
Below you will find various in-demand Toyota Engine Parts, components and accessories for your 1989 Corolla. Advance Auto Parts has popular Corolla parts like Camshafts, Engine Mounts, Engine Timing Parts and more. You’ll also find aftermarket and OEM Engine Parts for other Corolla model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 1989 Toyota Corolla Engine Parts below and start saving instantly.
Popular 1989 Toyota Corolla Engine Parts Categories
Essential Engine Parts for 1989 Toyota Corollas
PowerBond – Premium OEM Replacement Harmonic Balancer; 150mm Diameter (Part No.PB1653N)
from
$181.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
National – Shaft Repair Sleeve (Part No.99147)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Camshaft Seal (Part No.S-223010)
Victor Reinz – Engine Valve Cover Gasket Set (Part No.15-52809-01)
from
$43.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Dana engineering-approved for fit, form and function
- Meets or exceeds OE specifications
Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26158 PT-1)
from
$131.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Dayco – Timing Component Kit Without Belt, Dayco (Part No.84002)
from
$45.99
Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.
Product Features:
See More
Product Features:
- Engineered for the majority of domestic and import vehicle applications with a timing belt
- All components needed for a complete timing belt replacement included in one box
- Includes premium Dayco components and a tough, wear-resistant belt
- Meets or exceeds OE quality
Beck/Arnley – Engine Mount (Part No.104-1727)
from
$81.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
- Premium materials to dampen vibration
- Additional factory parts included where applicable
- Designed for underhood conditions
- Application specific for this vehicle
Carquest Premium – Oil Filler Cap (Part No.10092)
from
$8.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Dorman – Pigtail – Male Connector with Female Terminals, 3-Wire (Part No.645-744)
from
$53.99
This engine camshaft position sensor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft position sensor connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
INA US – ENG TIMING BELT TNS (Part No.ZT-9-5135)
from
$37.99
ENG TIMING BELT TNS
Dorman – Rubber Expansion Plug 2 In. – Size Range 2 In. – 2-1/8 In. (sold by each) (Part No.570-014)
from
$25.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Sealed Power – Engine Connecting Rod Bearing Set (Part No.4-1025PA)
from
$59.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength
- Provides conformability required for older apps
- Our standard material is comparable to competitors performance bearing
- Note – This material offers less resistance to wear & corrosion than other materials.
- Utilizes ISO & QS certified manufacturing
Dayco – Premium Timing Belt, 33.0 Inch With 88 Square Tooth (Part No.95070)
from
$15.49
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- This specific belt is for applications with standard temperature and load requirements with a square tooth profile
Sealed Power – Engine Assembly Lubricant (Part No.55-400)
from
$10.49
Sealed Power parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Formulated for pre-lubrication cam lobes, lifters & engine bearings
- Increases load carrying capacity
- Holds fast to surfaces
- Exacting tolerances
- Meets or exceeds OEM specifications
- 4.0 oz. Squeeze Container
Felpro – Engine Valve Cover Grommet Set (Part No.ES 72133)
from
$28.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Carquest Premium – Multi-Use Connector (Part No.PTA1104)
from
$26.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)
from
$122.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool« engine oil cooler kit
- Imperial Econo-Kool® engine oil cooler kit
- Lightweight construction with high-efficiency turbulators
- Light-duty applications
- All except Chevrolet V8 applications
- Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.
Felpro – Engine Crankshaft Seal Kit (Part No.BS 40665)
from
$12.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Melling – Stock Replacement OE Type Oil Pump (Part No.M200)
from
$113.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)
from
$6.99
Product Features:
See More
- Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
- High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
- Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
- Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up
Felpro – Engine Conversion Gasket Set (Part No.CS 9383)
from
$52.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
Dayco – Water Pump Kit With Components And Belt, Dayco (Part No.WP235K1A)
from
$114.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.
Product Features:
See More
Product Features:
- Engineered for both domestic and import vehicle applications with a timing belt
- Includes premium Dayco components and a tough, wear-resistant belt
Beck/Arnley – Crankshaft Seal (Part No.052-3179)
from
$7.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- High quality rubber designed to keep water and dirt out
- Quality construction for fitment
- Designed for under vehicle environment
- Application specific for this vehicle
Spectra Premium – Engine Oil Pan (Part No.TOP30A)
from
$142.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
- Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
- Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Coating salt spray tested for over 200 hours to insure durability
Dorman – Steel Cup Expansion Plug 35.21mm, Height 0.380 (Part No.555-093.1)
from
$2.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Melling – Engine Oil Priming Tool (Part No.MPL-201)
from
$355.99
Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.
See More
National – Multi-Purpose Seal (Part No.223235)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Upgrade your 1989 Toyota Corolla with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 1989 Toyota Corolla, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Engine Parts are key to keeping your Corolla functioning at its best. At Advance Auto Parts, we offer a wide selection of 48 Engine Parts for the 1989 Toyota Corolla, designed to meet your needs without breaking the bank.
From
Camshaft
replacements to
Engine Mounts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1989 Toyota Corolla at great prices.
Our Engine Parts inventory for this model
ranges from just $1.79 to $355.99, with
an average price of $57.20.
Our 48 Engine Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1989 Toyota Corolla without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 Toyota Corolla, we stock popular OEM and aftermarket Engine Parts from top names
like Felpro, Dorman, Imperial, and more.
Felpro Engine Parts
start at just $8.79 and boast an impressive 4.6 stars average rating from customers.
Dorman and Imperial also bring quality to the table, with Engine Parts available starting at $18.99, and at an average 4.2 stars rating.
With 197 customer reviews and counting, our 1989 Toyota Corolla Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1989 Toyota Corolla is always ready to roll. We’re committed to providing you with everything you need to keep your Corolla in top shape, all in one place.
Start shopping confidently below for your 1989 Toyota Corolla!
Best-Selling Camshafts for 1989 Toyota Corollas
Enhance the driving experience in your Toyota with 7 quality Camshaft components, starting at $6.99.
Felpro – Engine Camshaft Seal (Part No.TCS 45592)
from
$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
National – Multi-Purpose Seal (Part No.223830)
from
$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Carquest Premium – Multi-Use Connector (Part No.PTA1104)
from
$26.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
National – Multi Purpose Seal (Part No.1987)
from
$17.99
Product Features:
See More
- Design type: spring loaded; single-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Carquest Premium – Multi-Use Connector (Part No.ABA3461)
from
$14.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Felpro – Engine Camshaft Seal Kit (Part No.TCS 45424)
from
$12.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)
from
$6.99
Product Features:
See More
- Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
- High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
- Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
- Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up
Most Popular 1989 Toyota Corolla Engine Mounts
Customize your Toyota with 3 Engine Mounts products
like Engine Mounts, all
priced under $43.99.
Anchor – Engine Mount: Right, 1 Piece (Part No.9117)
from
$43.99
Anchor 9117 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1988-1989
- Weight approx: 4 Lbs
Anchor – Engine Mount: Front, 1 Piece (Part No.8180)
from
$27.99
Anchor 8180 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1988-1997
- Weight approx: 3 Lbs
Anchor – Engine Mount: Rear, 1 Piece (Part No.8186)
from
$21.99
Anchor 8186 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1988-1992
- Weight approx: 3 Lbs
Top Picks for 1989 Toyota Corolla Engine Timing Parts
Upgrade Toyota Corollas with top-quality Engine Timing Parts parts, including 5 OEM and aftermarket selections for your 1989 model.
Dayco – Timing Component Kit Without Belt, Dayco (Part No.84002)
from
$45.99
Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.
Product Features:
See More
Product Features:
- Engineered for the majority of domestic and import vehicle applications with a timing belt
- All components needed for a complete timing belt replacement included in one box
- Includes premium Dayco components and a tough, wear-resistant belt
- Meets or exceeds OE quality
National – Multi-Purpose Seal (Part No.223235)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Dayco – Premium Timing Belt, 35.24 Inch With 94 Square Tooth (Part No.95036)
from
$15.49
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- This specific belt is for applications with standard temperature and load requirements with a square tooth profile
Dayco – Water Pump Kit With Components And Belt, Dayco (Part No.WP036K1A)
from
$103.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.
Product Features:
See More
Product Features:
- Engineered for both domestic and import vehicle applications with a timing belt
- Includes premium Dayco components and a tough, wear-resistant belt
INA US – ENG TIMING BELT TNS (Part No.ZT-9-5135)
from
$37.99
ENG TIMING BELT TNS
In-Demand Engine Gaskets and Seals for 1989 Toyota Corollas
Select from 7 premium Engine Gaskets and Seals parts for your 1989 Toyota Corolla, with prices ranging from $9.99 to $52.99.
Felpro – VALVE COVER GASKET SET (Part No.VS 50324 R-1)
from
$42.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Validated for fit, form, and function
- Application specific design
- Engineered and manufactured specifically for the repair environment
- Quality you can trust
- Every part for the repair procedure is Includes in the kit unless otherwise noted
National – Shaft Repair Sleeve (Part No.99128)
from
$41.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Felpro – Engine Conversion Gasket Set (Part No.CS 9383)
from
$52.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
National – Engine Crankshaft Seal (Part No.227045)
from
$19.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
- Good dry heat resistance
- Excellent low temperature capability
- Delivers quality and reliable performance for every type of repair
Victor Reinz – Engine Valve Cover Gasket Set (Part No.15-52809-01)
from
$43.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Dana engineering-approved for fit, form and function
- Meets or exceeds OE specifications
Felpro – Engine Conversion Gasket Set (Part No.CS 9604)
from
$33.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
Victor Reinz – RTV Silicone (Part No.70-31414-10)
from
$9.99
Product Features:
See More
- Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
- Insignificant shrinkage and loss of mass even in high-heat environments
- Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
- Sealing gap 0.006 in (0.15 mm)
Most Sold 1989 Toyota Corolla Valve Cover and Cylinder Heads
Explore our best-selling Toyota parts for the 1989 Corolla among 3 OEM and aftermarket options starting from $28.99.
Felpro – Engine Valve Cover Grommet Set (Part No.ES 72133)
from
$28.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 8188 PT)
from
$123.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Application specific design to ensure a perfect fit and premium seal
- Premium quality parts you can trust
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9661 PT)
from
$179.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Top-Rated Engine Parts Brands For Your 1989 Toyota Corolla
Shop for the best-rated brands offering Engine Parts and other products for your 1989 Toyota Corollas. Below you’ll find some of our best rated Engine Parts from Felpro, Dorman, and Imperial, and more. Engine Parts from these brands that fit a 1989 Corolla start at just $8.79 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 1989 Toyota Corolla Engine Parts
When it comes to maintaining or upgrading your 1989 Toyota Corolla, using quality Engine Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Engine Parts, specifically designed for the 1989 Toyota Corolla. With over 3 Felpro brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.79, with an average price of just $26.92. Plus, with over 9 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$28.99
(1)
Engine Valve Cover Grommet Set
“This set of grommets is practically identical to the OEM ones – in my case I was replacing the valve cover on my 2.7L 4×4 tacoma and decided to go wit”
Popular Dorman 1989 Toyota Corolla Engine Parts
Dorman auto parts is one of the highest quality Engine Part brands in the market. Any 1989 Toyota Corolla owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1989 Corolla, Advance Auto Parts carries a full inventory of 1 Dorman Engine Parts. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Dorman Engine Parts range up to $18.99, plus, with more than 2 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.
from
$18.99
(2)
Rubber Expansion Plug 1-3/8" – Size Range 1-3/8" – 1-1/2" (Sold by each)
“These worked great for making a skidoo secondary clutch tool.”
FAQs for 1989 Toyota Corolla Engine Parts
Which Engine Parts are best-sellers for 1989 Toyota Corollas?
Out of 48 Engine Parts that fit 1989 Toyota Corollas, the following parts are the top sellers:
- Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (18481414) – $10.99
- Rubber Expansion Plug 1-1/2" – Size Range 1-1/2" – 1-5/8" (Sold by each) (16140204) – $14.99
- Econo-Kool® Engine Oil Cooler (15230012) – $122.99
What’s the price range for 1989 Toyota Corolla Engine Parts?
Engine Part prices for the 1989 Toyota Corolla start at $1.79 and go up to $355.99 for the most premium parts.
What’s the average price of a Engine Part for a 1989 Toyota Corolla?
The average price for Engine Parts for the 1989 Toyota Corolla is $57.20. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other Toyota Corolla model years?
What are the cheapest Engine Parts for my 1989 Toyota Corolla?
The cheapest 1989 Toyota Corolla Engine Parts we carry in stock are:
- Steel Cup Expansion Plug 40.08mm, Height 0.450 (Sold by each) (16140160) – $1.79
- Steel Cup Expansion Plug 35.21mm, Height 0.380 (Sold by each) (16140158) – $1.79
- Steel Cup Expansion Plug 35.21mm, Height 0.380 (3492354) – $2.99
- Steel Cup Expansion Plug 35.21mm, Height 0.380 (22972484) – $2.99
- Steel Cup Expansion Plug 40.08mm, Height 0.450 (3492710) – $3.99
What are the top-rated Engine Parts that fit the 1989 Toyota Corolla?
Out of 197 reviews by customers, our 1989 Toyota Corolla Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1989 Toyota Corolla and their top-rated products:
- Engine Gaskets and Seals
- VALVE COVER GASKET SET (5992206) – $42.99
- Valve Cover and Cylinder Heads
- VALVE COVER GASKET SET (5992206) – $42.99
- Engine Internals
- VALVE COVER GASKET SET (5992206) – $42.99
What types of Engine Parts do you sell for my 1989 Toyota Corolla?
As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1989 Toyota Corolla:
Can I get help with 1989 Toyota Corolla Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Engine Parts and more.
What is your return policy for Toyota Corolla Engine Parts?
Advance Auto Parts keeps returns simple. For new Toyota Corolla Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
