1989 Suzuki Samurai Differentials

Essential 1989 Suzuki Samurai Differentials

Yukon Gear – Master Overhaul Kit For Suzuki Samurai Differential (Part No.14106)

Master Overhaul Kit For Suzuki Samurai Differential

from

$369.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Suzuki Samurai
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and silicone.
See More

Payen – Pinion Seal (Part No.J7010247734PAY)

Pinion Seal

from

$9.07
Pinion Seal

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart (Part No.VV820)

High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart

from

$12.49
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
See More

Yukon Gear – Bearing Race Driver (Part No.56005)

Bearing Race Driver

from

$126.99
Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).

Product Features:
  • Bearing race driver
  • Fits 30306 race
  • All steel construction
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

USA Standard Gear – Samurai Spartan Locker Cross Pin Long (Part No.17028)

Samurai Spartan Locker Cross Pin Long

from

$46.99
Samurai Spartan locker cross pin long.

Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Suzuki Samurai
  • Works with Spartan Locker or standard open spider gears
  • Long shaft
See More

USA Standard Gear – Samurai Spartan Locker Cross Pin Short (Part No.17029)

Samurai Spartan Locker Cross Pin Short

from

$26.99
Samurai Spartan locker cross pin short.

Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Suzuki Samurai
  • Works with Spartan Locker or standard open spider gears
  • Short shaft
See More

Yukon Gear – Pinion Nut (Part No.33156)

Pinion Nut

from

$5.99
Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landrcuiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.

Product Features:
  • Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landcruiser with 30 spline pinion and Tacoma/T100 with factory locker
  • 20mm x 1.5 thread
  • 30mm socket
See More

National – Bearings (Part No.KC-11445-Y)

Bearings

from

$60.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Powertrax – Lock Right Locker (Part No.1530-LR)

Lock Right Locker

from

$377.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Mini Spool For Suzuki Samurai (Part No.32234)

    Mini Spool For Suzuki Samurai

    from

    $188.99
    Mini Spool for ’86 to ’95 Suzuki Samurai and ’89 to ’00 sidekick (rear only) with 26 axles. Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Suzuki Samurai
    • Installs into a standard open carrier case
    • Provides 100% traction to both wheels at all times
    • Not recommended for street driven vehicles
    See More

    USA Standard Gear – Spartan Locker for Suzuki Samurai Differential with 26 Spline Axles (Part No.17013)

    Spartan Locker for Suzuki Samurai Differential with 26 Spline Axles

    from

    $469.99
    The Spartan locker by USA standard gear is a mechanical locker that fits inside a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. This unit does use the stock side gears.

    Product Features:
    • Fits Suzuki Samurai
    • Made from 9310 steel for added strength
    • Works with stock side gears in standard carrier case
    See More

    Yukon Gear – Suzuki Samurai Crush Sleeve (Part No.33126)

    Suzuki Samurai Crush Sleeve

    from

    $23.99
    Suzuki Samurai crush sleeve. Approx 1.240″ long.

    Product Features:
    • Crush sleeve for Suzuki Samurai
    • 1.240″ tall
    See More

    Beck/Arnley – Seal Wheel (Part No.052-4064)

    Seal Wheel

    from

    $20.49
    Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

    Product Features:
    • Matches OE form, fit and function
    • High quality rubber designed to keep water and dirt out
    • Quality construction for fitment
    • Designed for under vehicle environment
    • Application specific for this vehicle
    See More

    Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

    Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

    from

    $39.99
    8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

    Product Features:
    • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1109)

    Differential Pinion Shim Kit

    from

    $13.49


    Product Features:
    • KIT SHIM TOYO TRK 79-92 REAR/89-92 FRONT
    See More

    USA Standard Gear – Pinion Installation Kit For Suzuki Samurai (Part No.60019)

    Pinion Installation Kit For Suzuki Samurai

    from

    $213.99
    Product Features:
    • Fits Suzuki Samurai
    • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    USA Standard Gear – Master Overhaul Kit For The Suzuki Samurai (Part No.37064)

    Master Overhaul Kit For The Suzuki Samurai

    from

    $265.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

    Product Features:
    • Fits Suzuki Samurai
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
    See More

    Yukon Gear – Minor Install Kit For Suzuki Samurai Differential (Part No.12064)

    Minor Install Kit For Suzuki Samurai Differential

    from

    $76.99
    Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

    Product Features:
    • Fits Suzuki Samurai
    • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56034)

    The Carrier Bearing Puller

    from

    $689.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
    See More

    Yukon Gear – Pinion Install Kit For Suzuki Samurai Differential (Part No.13080)

    Pinion Install Kit For Suzuki Samurai Differential

    from

    $309.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits Suzuki Samurai
    • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    1989 Suzuki Samurai Differentials

    Maybe you’re in the middle of a full rebuild of that 1989 Suzuki Samurai. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 29 different Differentials in our inventory ranging from $5.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1989 Suzuki Samurai running smoothly.

    Differentials are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Suzuki Samurai. Royal Purple, Valvoline, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1989 Suzuki Samurai, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

    So if you’re in the market for aftermarket Differentials to keep your 1989 Suzuki Samurai rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1989 Suzuki Samurai Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Suzuki Samurai demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Samurai the best it can be. Be sure to browse some of our top Differentials brands and parts.

    FAQs for 1989 Suzuki Samurai Differentials

    What are the most purchased Differentials for the 1989 Suzuki Samurai?

    Out of 29 Differentials for the 1989 Suzuki Samurai, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)
    from $12.99
    This product is not rated
    HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)
    Differential Oil
    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts
    from $148.99
    This product is not rated
    Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts
    Differential Oil