1989 Suzuki Car Parts

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

Replace aging, worn out factory soft-top and gain some additional storage space inside the driving compartment. All the features of the original factory top with exclusive Rampage additions; two zippered storage pockets. Produced in original factory specifications and colors, the Rampage replacement top easily installs over factory framework, and attaches to factory mounting points and Original Equipment belt rail attachment System. Fits all factory applications and includes the top fabric, clear or tinted windows and, where applicable, includes upper door skins that slip over the OE upper doorframes.

Product Features:

• Produced To OEM Specs
• Weatherproof Design Heat Sealed Seams and Windows
• Denim Black With Clear Windows

New XHD Replacement Soft-Tops from Rugged Ridge now available! Each Fabric Soft Top is designed to easily fit the factory original soft top hardware. Simply take off the old top and slip on the new. It’s just that easy! These new designs feature reinforce

Product Features:

• Black Denim
• 30 Mil Windows
• Rear Window Zips Out
• UV Treated
• Uses Factory Bow Assembly

Rugged Ridge Fabric Replacement Soft Top has been developed out of years of industry research and engineering. Our trained staff of Jeep experts have developed an entire program that offers the best value, selection and design of any Fabric Soft Top offer

Product Features:

• Durable Vinyl Coated Polyester
• DOT Approved Crystal Clear Glass

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

New XHD Replacement Soft-Tops from Rugged Ridge now available! Each Fabric Soft Top is designed to easily fit the factory original soft top hardware. Simply take off the old top and slip on the new. It’s just that easy! These new designs feature reinforce

Product Features:

• Black Denim
• 30 Mil Windows
• Rear and Side Windows Roll Up
• UV Treated
• Uses Factory Bow Assembly

Fender Flare

New XHD Replacement Soft-Tops from Rugged Ridge now available! Each Fabric Soft Top is designed to easily fit the factory original soft top hardware. Simply take off the old top and slip on the new. It’s just that easy! These new designs feature reinforce

Product Features:

• White Denim
• 30 Mil Windows
• Rear and Side Windows Roll Up
• UV Treated
• Uses Factory Bow Assembly

New XHD Replacement Soft-Tops from Rugged Ridge now available! Each Fabric Soft Top is designed to easily fit the factory original soft top hardware. Simply take off the old top and slip on the new. It’s just that easy! These new designs feature reinforce

Product Features:

• White Denim
• 30 Mil Windows
• Rear Window Zips Out
• UV Treated
• Uses Factory Bow Assembly

Rugged Ridge Fabric Replacement Soft Top has been developed out of years of industry research and engineering. Our trained staff of Jeep experts have developed an entire program that offers the best value, selection and design of any Fabric Soft Top offer

Product Features:

• Durable Vinyl Coated Polyester
• DOT Approved Crystal Clear Glass

Rugged Ridge Fabric Replacement Soft Top has been developed out of years of industry research and engineering. Our trained staff of Jeep experts have developed an entire program that offers the best value, selection and design of any Fabric Soft Top offer

Product Features:

• Durable Vinyl Coated Polyester
• DOT Approved Crystal Clear Glass

Replace aging, worn out factory soft-top and gain some additional storage space inside the driving compartment. All the features of the original factory top with exclusive Rampage additions; two zippered storage pockets. Produced in original factory speci

Product Features:

• Produced To OEM Specs
• Weatherproof Design Heat Sealed Seams and Windows
• Diamond Black with Tinted Windows
• One Year Warranty

Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.

Product Features:

• Protects Cab Area From UV & Heat Build-up
• Also Good For Snow & Ice Protection
• Easy to Install
• Stow Behind Seat

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.

Product Features:

• Protects Cab Area From UV & Heat Build-up
• Also Good For Snow & Ice Protection
• Easy to Install
• Stow Behind Seat

Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.

Product Features:

• Protects Cab Area From UV & Heat Build-up
• Also Good For Snow & Ice Protection
• Easy to Install
• Stow Behind Seat

Truck Cab Cooler protects the cockpit area from UV rays and helps reduce heat build-up inside the vehicle. Easy to install, Cab Coolers use hook and loop fasteners under the mirrors and door handles (varies by model). Some patterns include adjustable webbing straps to wheel wells to securely hold the cover in place. Custom patterned for trucks and SUV’s.

Product Features:

• Protects Cab Area From UV & Heat Build-up
• Also Good For Snow & Ice Protection
• Easy to Install
• Stow Behind Seat

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

This door mirror was engineered to look, fit and function like the original mirror assembly for your vehicle’s specific year, make and model. It includes the same mirror glass, housing, bracket and technology as the part that came on the vehicle.

Product Features:

• Perfect replacement – reverse engineered to look, fit and function exactly like the original door mirror on your vehicle’s specific year, make and model
• Complete assembly – includes same mirror glass, housing, bracket and technology as the original part that came on the vehicle
• Cost-effective and reliable – functions similarly to the original part but is much less expensive than getting a replacement from the dealership or original manufacturer
• Easy installation – no special tools or equipment is necessary for installing this new part

This door mirror was engineered to look, fit and function like the original mirror assembly for your vehicle’s specific year, make and model. It includes the same mirror glass, housing, bracket and technology as the part that came on the vehicle.

Product Features:

• Perfect replacement – reverse engineered to look, fit and function exactly like the original door mirror on your vehicle’s specific year, make and model
• Complete assembly – includes same mirror glass, housing, bracket and technology as the original part that came on the vehicle
• Cost-effective and reliable – functions similarly to the original part but is much less expensive than getting a replacement from the dealership or original manufacturer
• Easy installation – no special tools or equipment is necessary for installing this new part

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

New Standard Replacement Driver Side Rocker Panel, Slip-On Type, 2 Door Models, 40.5 X 4.63 X 3.63

Product Features:

• Slip-On Type, 2 Door Models, 40.5 X 4.63 X 3.63, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, Black, 2 Door. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

• Black, 2 Door, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass to be adjusted by hand
• Manual folding for additional clearance
• Black
• Superior material and manufacturing process ensures the highest quality possible

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

AT SOLENOID SEAL

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to SUZUKI 85-95;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1985-1995
• Weight approx: 1 Lbs

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

• BUILT TO LAST — Advanced heat treatment process for strength
• PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Controlled heat treating process for lasting performance and extended bearing life
• Industry leading coverage
• Professional technicians know they can depend on National

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 90 minutes

AT DPSTK TUBE SEAL

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

AT SPEED PINION SEAL

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

AT FRT PUMP BUSHING

Product Features:

• Brand may vary by location

One of the most complete rebuild kits in the automatic transmission industry today. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

• Include steels, frictions, gaskets, and filter
• Includes Band and Modulator (if applicable)

This Basic Rebuild Kit contains a complete gasket Kit and friction set. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

• Does not include steels or filter

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

• Designed specially for high-torque and high vibration applications
• Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
• OEM specified
• Low-odor, non-corrosive formula
• Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Matched cup and cone components ensures consistent quality and outstanding performance
• Industry leading coverage
• Professional technicians know they can depend on National

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

• Matches OE form, fit and function
• Includes necessary hardware and clips for proper installation
• Hardware matches original design requirements
• Constructed for durability
• Application specific for this vehicle

Clutch cables connect the clutch pedal to the transmission shift fork. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Clutch cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Includes brackets, grommets, etc to match original
• Returns clutch petal feel to normal
• Allows proper clutch engagement

Clutch cables connect the clutch pedal to the transmission shift fork. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Clutch cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Includes brackets, grommets, etc to match original
• Returns clutch petal feel to normal
• Allows proper clutch engagement

The EXEDY Pro-Kit clutch assembly you will receive is manufactured on the same production line as OEM clutch components! Clutch cover assemblies (pressure plates): All cover assemblies endure a precise robotic testing process to ensure proper clamp load and clutch lift separation. This step ensures optimal pedal feel for better drivability. To help guarantee durability, the diaphragm spring (dark fingers in the center) receives special high frequency induction heat treating. This helps prevent the wear that normally occurs at the contact surface of the release bearing. Together, these procedures provide you a like-new pedal feel throughout the life of your clutch. Clutch Discs: EXEDY Engineers develop, perfect and manufacture our own friction materials. We produce a material with exceptional friction and wear characteristics that will help engage smoothly, grip as expected and provide you with a longer lasting installation. Disc Spring Dampers: This is the center section of the clutch disc. EXEDY spring-type disc dampers are patented worldwide to suppress engine and driveline noise by absorbing vibrations. Vehicle-specific designs let you enjoy your ride without compromise.

Product Features:

• Original Equipment Replacement.
• Direct fit application.
• True OE friction plates and steels.
• Contains all necessary components

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

Clutch cables connect the clutch pedal to the transmission shift fork. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Clutch cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Includes brackets, grommets, etc to match original
• Returns clutch petal feel to normal
• Allows proper clutch engagement

Product Features:

• Brand may vary by location

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

M/T FLYWHEEL

LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.

Product Features:

• OE quality and direct fit application
• Made from high quality steel
• Designed to reduce clutch chatter and vibration
• Dynamically balanced

The Nachi pilot bearing is manufactured in accordance to strict OEM specifications for performance and durability.

Product Features:

• OEM supplier of clutch pilot bearings for Acura and Honda
• Adopted original seal design to prevent contamination and grease leakage
• Contains special grease for wider temperature ranges and longer life
• Smooth and quiet operation
• Lower rotating torque by improving seal lips
• Compact design for lightweight to achieve high performance

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

HIGHLAND all weather floor mats offer the ultimate protection for front and rear floors. These durable, pliable floor mats will not stiffen or crack even in the harshest of weather conditions. Protect your investment and increase your resale value with these high quality floor mats.

Product Features:

• Easily installed and removed – no tools required
• Designed to fit your specific vehicle contours
• Raised ridges confines dirt and water to keep your vehicles carpet clean
• Anti-skid spikes on back of mats prevent the mat from slipping

Lower Radiator Hose Heater

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for a perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.

Product Features:

• The most heavy-duty car cover on the market
• Specially treated to resist fading and color transfer
• Sheds water and blocks out dust
• Outsmart the outdoors!

As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.

Product Features:

• The most heavy-duty car cover on the market
• Specially treated to resist fading and color transfer
• Sheds water and blocks out dust
• Outsmart the outdoors!

As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.

Product Features:

• The most heavy-duty car cover on the market
• Specially treated to resist fading and color transfer
• Sheds water and blocks out dust
• Outsmart the outdoors!

As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution.

Product Features:

• The most heavy-duty car cover on the market
• Specially treated to resist fading and color transfer
• Sheds water and blocks out dust
• Outsmart the outdoors!

Sunbrella custom fit car covers are top quality outdoor covers, specifically crafted to withstand the harshest Arizona desert sun. This heavy-duty cover withstands high heat, high temperatures, and damaging UV rays. Treated for moisture resistance in humid marine areas as well. Constructed from woven acrylic fabric that is solution-dyed for ultimate color protection. Custom cut to fit your exact vehicle. Installs easily with a tie-down cab.

Product Features:

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage

For those who like traditional woven fabrics for indoor car cover protection, the Tan Flannel is the perfect choice. This is a high performance indoor fabric with a durable Polycotton blend on the outside and a flannel underside soft napped finish. Its long wearing and breathable. Specially treated to repel moisture and resist rot and mildew.

Product Features:

• A favorite amongst car enthusiasts
• Flannel lined for an ultra-soft, paint-friendly cover
• Constructed from all cotton based materials
• Our ‘classic’ indoor cover

For those who like traditional woven fabrics for indoor car cover protection, the Tan Flannel is the perfect choice. This is a high performance indoor fabric with a durable Polycotton blend on the outside and a flannel underside soft napped finish. Its long wearing and breathable. Specially treated to repel moisture and resist rot and mildew.

Product Features:

• A favorite amongst car enthusiasts
• Flannel lined for an ultra-soft, paint-friendly cover
• Constructed from all cotton based materials
• Our ‘classic’ indoor cover

For those who like traditional woven fabrics for indoor car cover protection, the Tan Flannel is the perfect choice. This is a high performance indoor fabric with a durable Polycotton blend on the outside and a flannel underside soft napped finish. Its long wearing and breathable. Specially treated to repel moisture and resist rot and mildew.

Product Features:

• A favorite amongst car enthusiasts
• Flannel lined for an ultra-soft, paint-friendly cover
• Constructed from all cotton based materials
• Our ‘classic’ indoor cover

Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:

• Good basic indoor protection
• Drill weave Polycotton blend
• Resists tears and punctures
• Treated to resist rot and mildew

Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:

• Good basic indoor protection
• Drill weave Polycotton blend
• Resists tears and punctures
• Treated to resist rot and mildew

Keep your front-end looking showroom new with the AVS Bugflector II(R); an innovative high-profile hood shield with a wrap-around design. The AVS Bugflector II(R) is constructed using proprietary, impact resistant ABS material, and it offers maximum coverage area to stop rocks from dinging your hood and to keep insects off your windshield. Car wash safe with an easy non-drill installation, the AVS Bugflector II(R) means minimal downtime without sacrificing protection for your vehicle.

Product Features:

• Provides deflection to protect hood, fenders, and windshield
• High profile, full-wrap design for Trucks, SUVs, and Vans
• Off-the-hood design allows for easy cleaning and waxing
• Durable, impact-resistant acrylic construction
• Available in dark smoke or chrome
• Easy, no-drill installation

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for a perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Standard Installation Kit. This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step-by-step instructions, a die cast hub, grade 5 hardware and matte black trim pieces.

Product Features:

• Use To Install All Classic, Challenger Or Signature Series Wheels
• Each Kit Contains Complete Step-By-Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
• ISO/ TS Certified
• Designed To Mount Our Wheel To Your Rig

ACCEL CABLE

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

SuedeMat dashboard covers are a clean and rich looking dash cover that looks and feels like suede leather. They maintain the same great custom fit as DashMats, molding to ridges and curves on your dashboard. Along with the rest of the DashMat products, it dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• The rich appearance and feel of suede-like fabric
• Custom tailored for a precise, snug fit
• Protects your dash from sun damage and reduces windshield glare
• Vents, sensors and trays remain fully functional
• Simple installation with hook and loop fasteners

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

The Limited Edition Custom Dashboard Cover features a new warp-knit polyester fabric style that looks great with today’s vehicle interiors. Individually made to fit your vehicle’s specific dashboard. DashMat dashboard covers are a stylish way to cut windshield haze caused by gasses emitted from the dashboard. Dramatically reduces hazardous windshield glare as well. Rays from the sun beat through the dashboard at extremely high temperatures causing damage to the dashboard. Limited Edition DashMat dash covers protect your vehicle’s dashboard in the most extreme temperature conditions.

Product Features:

• Unique warp-knit design fits perfectly with today’s vehicle interiors
• Compliments technical fabrics in newer vehicles
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Vents and sensor openings pre-cut for a factory finish look
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s #1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s No. 1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

The Original DashMat is America’s #1 dashboard cover for cars, trucks, vans and SUV’s. Custom-tailored for a perfect fit, a DashMat helps protect the dash surface from UV damage, dramatically reduces hazardous windshield glare, and/or covers blemishes and cracks in older dashboards. Constructed of durable, color-fast, non-shrinking needle punch carpet material.

Product Features:

• Soft foss fiber carpet won’t fray or unravel
• Custom fit to the dashboard of your vehicle
• Helps prevent dashboard warping and cracking
• Reduces hazardous windshield glare
• Passenger-side airbag opening included where applicable
• Hook and loop fasteners included for easy secure installation

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Includes Cable Lube
• Plastic sheath protects cable from debris and water
• Comes ready to install

Original equipment replacement horn that delivers a powerful 130 dB of sound that ensures you’ll be heard over surrounding noise! This horn features high durability, water & corrosion resistant steel housing. The HK 9 disc horn that meets or exceeds SAE & O.E.M. specifications for a wide range of cars, trucks & motorcycles. Quick & Easy installation kit included. Features high durability, water & corrosion resistant steel housing with aluminium tone disc and universal mounting bracket. 12V, 130 dB @ 4″