1989 Mercedes-Benz 300SEL Cooling and Climate Controls

Essential Cooling and Climate Controls for 1989 Mercedes-Benz 300SELs

Carquest Premium – Radiator Cap: 13 PSI (Part No.10229)

Radiator Cap: 13 PSI

from

$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Rein – Cap-Expansion Tank (Part No.CPE0026P)

Cap-Expansion Tank

from

$11.49
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

ACM – Air Conditioning Temperature Switch (Part No.R105529376ACM)

Air Conditioning Temperature Switch

from

$32.44
ACM is a supplier of Original Equipment quality climate control products. Located on receiver drier for auxiliary cooling fan. Identified by 2 spade terminals on short pigtail with red base.
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1249)

Temperature Sender With Gauge

from

$18.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Daytime Running Light Relay (Part No.RLC1001)

Daytime Running Light Relay

from

$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

APA/URO – APA/URO Expansion Tank (Part No.G103016617APA)

APA/URO Expansion Tank

from

$42.41
The APA/URO expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:
  • OE-Equivalent and Direct Fit for easy Installation.
  • OE style connections and fittings.
  • Made of highly durable materials.
  • Resistant to thermal wear and cracking.
See More

Behr – Air Conditioning Evaporator, Without Valve (Part No.R113044442BEH)

Air Conditioning Evaporator, Without Valve

from

$250.87
Air Conditioning Evaporator, Without Valve

CRP – Thermostat O-Ring (Part No.G403032487)

Thermostat O-Ring

from

$2.29
Thermostat O-Ring

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T38602)

A/C Block Type O-Ring Expansion Valve

from

$44.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Dorman – Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle (Part No.902-943)

Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle

from

$43.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13496)

Standard Thermostat: 160 Degrees

from

$21.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Programa – HVAC Control Module (Part No.R205949491PRO)

HVAC Control Module

from

$420.22
Remanufactured Programa specializes in BMW, Mercedes Benz, Volvo, Porsche and Saab remanufactured ignition control units. Remanufacturing Process:

Product Features:
  • Complete visual inspection.
  • Boards and components are repaired or replaced.
  • Any test that fails to meet OEM specifications is repaired or replaced.
  • Once the ICU meets all OEM specifications, the unit is reassembled, sealed and packaged.
See More

Factory Air – Green Round O-Ring (Part No.24615)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Febi – Bilstein Engine Cooling Fan Blade (Part No.G505014303FEB)

Bilstein Engine Cooling Fan Blade

from

$83.78
The Febi/Bilstein Engine Cooling Fan Blade is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUE1914)

HVAC Blower Motor Resistor

from

$668.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Dorman – Electrical Harness – 2-Wire GM A/C Clutch with Diode (Part No.85143)

Electrical Harness - 2-Wire GM A/C Clutch with Diode

from

$11.99
This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Metrix – Auxiliary Cooling Fan Assembly (Part No.G500034209MTX)

Auxiliary Cooling Fan Assembly

from

$115.94
The Metrix Auxiliary Cooling Fan Assembly is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE quality
  • Quiet operation and dependable performance
  • Dual Bearing design technology
  • Vibration free operation
  • Precision assembled and balanced with all new components
  • Tested to OEM specifications
See More

Nissens – Nissens Heater Core (Part No.R300070302NSS)

Nissens Heater Core

from

$147.81
Nissens manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.

Product Features:
  • OEM Quality Direct fit Application
  • Meets or exceeds OEM specifications.
  • Utilizes the factory style mounts, connectors and fittings.
  • Provides exceptional reliability.
See More

Carquest Premium – A/C Filter Drier (Part No.T33384)

A/C Filter Drier

from

$47.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Dorman – 5-Wire Style Relay (Part No.85170)

5-Wire Style Relay

from

$17.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Febi – Rivet (Part No.Q20011324407FEB)

Rivet

from

$2.02
Rivet

APA/URO Parts – Coolant Level Sensor (Part No.G105016387APA)

Coolant Level Sensor

from

$28.65
A.P.A. URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components.
See More

Hella – Coolant Level Sensor (Part No.G105016387HEL)

Coolant Level Sensor

from

$38.56
Coolant Level Sensor

Carquest Premium – Radiator Cap: 16 PSI (Part No.10226)

Radiator Cap: 16 PSI

from

$9.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10230)

Radiator Cap: 16 PSI

from

$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Upgrade your 1989 Mercedes-Benz 300SEL with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1989 Mercedes-Benz 300SEL, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Cooling and Climate Controls are key to keeping your 300SEL functioning at its best. At Advance Auto Parts, we offer a wide selection of 76 Cooling and Climate Controls for the 1989 Mercedes-Benz 300SEL, designed to meet your needs without breaking the bank. From Heating Part replacements to Engine Cooling Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1989 Mercedes-Benz 300SEL at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.99 to $668.99, with an average price of $81.47. Our 76 Cooling and Climate Controls in stock come from 29 trusted brands, so you’re sure to find the right part for your 1989 Mercedes-Benz 300SEL without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 Mercedes-Benz 300SEL, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Factory Air, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Factory Air also bring quality to the table, with Cooling and Climate Controls available starting at $0.99, and at an average 4 stars rating. With 380 customer reviews and counting, our 1989 Mercedes-Benz 300SEL Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1989 Mercedes-Benz 300SEL is always ready to roll. We’re committed to providing you with everything you need to keep your 300SEL in top shape, all in one place. Start shopping confidently below for your 1989 Mercedes-Benz 300SEL!

Best-Selling Heating Parts for 1989 Mercedes-Benz 300SELs

Enhance the driving experience in your Mercedes-Benz with 2 quality Heating Part components, starting at $31.71.

APA/URO Parts – Mono Valve Repair Ki (Part No.R302311903APA)

Mono Valve Repair Ki

from

$31.71
Mono Valve Repair Ki

Nissens – Nissens Heater Core (Part No.R300070302NSS)

Nissens Heater Core

from

$147.81
Nissens manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.

Product Features:
  • OEM Quality Direct fit Application
  • Meets or exceeds OEM specifications.
  • Utilizes the factory style mounts, connectors and fittings.
  • Provides exceptional reliability.
See More

Most Popular 1989 Mercedes-Benz 300SEL Engine Cooling Parts

Customize your Mercedes-Benz with 47 Engine Cooling Parts products like Thermostats, Radiators, and Water Pumps, all priced under $347.99.

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13648)

Standard Thermostat: 180 Degrees

from

$24.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Radiator Cap: 20 PSI (Part No.10335)

Radiator Cap: 20 PSI

from

$9.49
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Safety lever to vent coolant pressure before removal
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

MAHLE Original – Engine Coolant Thermostat Housing Gasket (Part No.C31633)

Engine Coolant Thermostat Housing Gasket

from

$2.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Carquest Premium – Thermostat, 189 Degrees Fahrenheit (Part No.48019)

Thermostat, 189 Degrees Fahrenheit

from

$45.29
Original equipment design provides exact fit and performance.

Product Features:
  • Precise fitting sealing edges prevent leakage and premature cooling.
  • Self-cleaning and self-aligning thermostat valve.
  • Stainless steel assembly and springs are engineered for long life and smooth performance.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – Radiator Cap: 20 PSI (Part No.10235)

Radiator Cap: 20 PSI

from

$8.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Standard Thermostat: 192 Degrees (Part No.13649)

Standard Thermostat: 192 Degrees

from

$25.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13496)

Standard Thermostat: 160 Degrees

from

$21.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Rein – Cap-Expansion Tank (Part No.CPE0026P)

Cap-Expansion Tank

from

$11.49
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Mahle – MAHLE Thermostat (Part No.G400014603MAH)

MAHLE Thermostat

from

$32.73
Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:
  • OE quality and design
  • Maintenance-free, durable elements
See More

Beck/Arnley – Thermostat, 195 Degrees Fahrenheit (Part No.143-0636)

Thermostat, 195 Degrees Fahrenheit

from

$28.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
  • Constructed with premium materials for durability
  • Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
  • Application specific for this vehicle
See More

Rein – Radiator Cap (Part No.G101030351RIN)

Radiator Cap

from

$16.62
Radiator Cap

Flex A Lite – Black Magic Electric Fan (Part No.160)

Black Magic Electric Fan

from

$347.99
Black Magic Electric Fan

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.41472)

Radiator: With Transmission Oil Cooler

from

$296.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Behr – Hella Service Visco® Engine Cooling Fan clutch (Part No.G501014302BEH)

Hella Service Visco® Engine Cooling Fan clutch

from

$235.74
The Visco® clutch has the task of making the frictional connection to the fan wheel depending on the temperature, and influencing its speed. The drive torque is transferred by means of wear-free viscous friction to the fan wheel, the continuously variable speed of which is set on the basis of the operating conditions. In the case of the electrically-driven Visco® clutch, control takes place directly via sensors. Requirement-based cooling optimizes the coolant temperature, engine noise and fuel consumption.

Product Features:
  • Out of box, drop in replacements
  • Factory mounts for easy install
  • Exact fit
  • Reduced labor time
  • Higher customer satisfaction
See More

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-310)

Radiator Fan Assembly: Single, Cost Effective And Reliable

from

$183.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Geba – Water Pump (Part No.G3000945830GEB)

Water Pump

from

$141.00
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • High quality cast aluminum.
  • Advanced bearing design for high axial and radial stresses.
  • Unitized sealing technology that ensures optimal leak tightness and longevity.
  • Optimum cooling performance and longevity.
See More

MTC – MTC, Auxiliary Water Pump, NLA 1.19 (Part No.G305011908MTC)

MTC, Auxiliary Water Pump, NLA 1.19

from

$140.16
Built to meet the latest OE manufacturer-specified designs, MTC Auxiliary Water Pumps are the best way to make sure you have the proper heat protection for the engine in your vehicle. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • CO²-reduction by optimized efficiency, speed control and reduced weight
  • Coverage of a wide hydraulic performance range
  • Reduced noise level
See More

Autopart International Inc – Fan Clutch (Part No.G50101936765API)

Fan Clutch

from

$134.18
Fan Clutch

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)

Trimline Straight Blade Electric Fan

from

$119.99
Trimline Straight Blade Electric Fan

Metrix – Auxiliary Cooling Fan Assembly (Part No.G500034209MTX)

Auxiliary Cooling Fan Assembly

from

$115.94
The Metrix Auxiliary Cooling Fan Assembly is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE quality
  • Quiet operation and dependable performance
  • Dual Bearing design technology
  • Vibration free operation
  • Precision assembled and balanced with all new components
  • Tested to OEM specifications
See More

Bosch – Water Temperature Sensors (Part No.C602012903BOS)

Water Temperature Sensors

from

$104.65
Bosch liquid temperature sensors accurately monitor the vital fluids in your vehicle ensuring long and healthy life. The sensor provides information to the Engine control Unit to keep your engine running strong, safe, and efficient.

Product Features:
  • High durability against operating materials: fuel, oil, water
  • Sturdy, vibration-proof design with lasting performance
  • Extreme Accuracy under extreme conditions: -40F – +260F
See More

Carquest Premium – Universal Reverse Rotation Thermal Standard Duty Fan Clutch (Part No.215075)

Universal Reverse Rotation Thermal Standard Duty Fan Clutch

from

$103.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Febi – Bilstein Engine Cooling Fan Blade (Part No.G505014303FEB)

Bilstein Engine Cooling Fan Blade

from

$83.78
The Febi/Bilstein Engine Cooling Fan Blade is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Daytime Running Light Relay (Part No.RLC1001)

Daytime Running Light Relay

from

$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1481)

Coolant Temperature Sensor

from

$56.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Mahle – A/C ACC Temp Sensor (Part No.R107526553MAH)

A/C ACC Temp Sensor

from

$46.66
A/C ACC Temp Sensor

FAE – Water Temp. Sensor (Part No.C60202725401FAE)

Water Temp. Sensor

from

$44.25
Water Temp. Sensor

Dorman – Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle (Part No.902-943)

Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle

from

$43.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

APA/URO – APA/URO Expansion Tank (Part No.G103016617APA)

APA/URO Expansion Tank

from

$42.41
The APA/URO expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:
  • OE-Equivalent and Direct Fit for easy Installation.
  • OE style connections and fittings.
  • Made of highly durable materials.
  • Resistant to thermal wear and cracking.
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Hella – Coolant Level Sensor (Part No.G105016387HEL)

Coolant Level Sensor

from

$38.56
Coolant Level Sensor

Delphi – Engine Coolant Temperature Sensor (Part No.TS10263)

Engine Coolant Temperature Sensor

from

$32.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

Febi – Bilstein Thermostat Housing Cover / Water Outlet (Part No.G401139361FEB)

Bilstein Thermostat Housing Cover / Water Outlet

from

$31.84
The Febi/Bilstein Thermostat Housing Cover is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE style construction
  • Quality machined thread ports
  • Corrosion and rust inhibitor coated
  • Meets or Exceeds OEM Specifications
See More

Carquest Premium – Engine Coolant Temperature Sender (Part No.WTA1502)

Engine Coolant Temperature Sender

from

$30.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

APA/URO Parts – Coolant Level Sensor (Part No.G105016387APA)

Coolant Level Sensor

from

$28.65
A.P.A. URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components.
See More

Febi – Water Temp. Sensor (Part No.C60202725401FEB)

Water Temp. Sensor

from

$20.50
Water Temp. Sensor

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1249)

Temperature Sender With Gauge

from

$18.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Calorstat – CALORSTAT Thermostat (Part No.G400014603CAL)

CALORSTAT Thermostat

from

$18.56
CALORSTAT thermostatic components (bellows thermostats for water temperature regulation), followed by the use of a different technology based on the wax expansion. CALORSTAT by Vernet has produced thermostatic elements for more than 50 years. A vast amount of experience and continuous development has enabled the Company to remain the world leader in this field. Throughout the world, Vernet is regarded as a valued partner by manufacturers, large and small, in the Sanitary, Heating and Automotive industry.

Product Features:
  • Comfort enhancement by a faster cabine warming
  • CO2 emissions and fuel consumption reduction
  • Thermostat opening driven by the ECU (electrical thermostat)
  • An adaptation of the control strategies to the vehicle use (electrical thermostat)
See More

Autopart International Inc – Thermostat (Part No.G40001993757API)

Thermostat

from

$17.57
Thermostat

Behr – Radiator Drain Plug (Part No.G106034117BEH)

Radiator Drain Plug

from

$8.14
Radiator Drain Plug

APA/URO Parts – Radiator Cap (Part No.G101030351APA)

Radiator Cap

from

$7.65
Radiator Cap

CRP – Coolant Sensor O-Rin (Part No.G105112427CRP)

Coolant Sensor O-Rin

from

$2.60
Coolant Sensor O-Rin

CRP – Thermostat O-Ring (Part No.G403032487)

Thermostat O-Ring

from

$2.29
Thermostat O-Ring

Febi – Rivet (Part No.Q20011324407FEB)

Rivet

from

$2.02
Rivet

Top Picks for 1989 Mercedes-Benz 300SEL Blower Motor and Related Products

Upgrade Mercedes-Benz 300SELs with top-quality Blower Motor and Related Products parts, including 3 OEM and aftermarket selections for your 1989 model.

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUE1914)

HVAC Blower Motor Resistor

from

$668.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Vemo – Blower Motor (Part No.R203116694VMO)

Blower Motor

from

$380.05
Blower Motor

APA/URO Parts – Blower Motor (Part No.R203116694APA)

Blower Motor

from

$242.94
Blower Motor

In-Demand Air Conditioning Parts for 1989 Mercedes-Benz 300SELs

Select from 23 premium Air Conditioning Parts parts for your 1989 Mercedes-Benz 300SEL, with prices ranging from $0.99 to $334.99.

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T38602)

A/C Block Type O-Ring Expansion Valve

from

$44.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Cap & Valve A/C System Seal Kit

from

$16.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Dorman – 5-Wire Style Relay (Part No.85170)

5-Wire Style Relay

from

$17.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Factory Air – Green Round O-Ring (Part No.24650)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Factory Air – Green Round O-Ring (Part No.24610)

Green Round O-Ring

from

$0.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Factory Air – Green Round O-Ring (Part No.24615)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Behr – A/C Pressure Switch (Part No.R1054178181BEH)

A/C Pressure Switch

from

$35.56
Behr GmbH & Co. KG, Stuttgart, is a specialist for automotive air conditioning and engine cooling systems, the Behr Group is one of the world’s leading manufacturers and suppliers of Original Equipment cooling and air conditioning products for European passenger and commercial vehicles. 2 bar low pressure and 30 bar high pressure binary switch. This switch is designed to be compatible with R-12 and R134a refrigerants. Located on receiver-drier with 2 spade terminals. Used for compressor cut-out.
See More

Dorman – Electrical Harness – 2-Wire GM A/C Clutch with Diode (Part No.85143)

Electrical Harness - 2-Wire GM A/C Clutch with Diode

from

$11.99
This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Factory Air – Sealing Washer Kit (Part No.24338)

Sealing Washer Kit

from

$5.29
Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Carquest Premium – New Compressor with Clutch, Nippondenso 10PA17C (Part No.T58336)

New Compressor with Clutch, Nippondenso 10PA17C

from

$334.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All compressors go through sophisticated testing and leak test processes
  • Includes specific electrical connector to eliminate splicing
  • For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
  • Validated for fit, form, and function to OE standards
See More

Carquest Standard – Reman Nippondenso 10PA17C Compressor w/ Clutch (Part No.DW57336)

Reman Nippondenso 10PA17C Compressor w/ Clutch

from

$261.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

Behr – Air Conditioning Evaporator, Without Valve (Part No.R113044442BEH)

Air Conditioning Evaporator, Without Valve

from

$250.87
Air Conditioning Evaporator, Without Valve

Carquest Premium – A/C Compressor Speed Sensor (Part No.ACC1605)

A/C Compressor Speed Sensor

from

$92.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
  • All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
See More

Autopart International Inc – A/C Receiver Drier (Part No.R10403307429API)

A/C Receiver Drier

from

$53.87
A/C Receiver Drier

Egelhof – A/C Expansion Valve (Part No.R104516718EGE)

A/C Expansion Valve

from

$50.89
A/C Expansion Valve

Carquest Premium – A/C Filter Drier (Part No.T33384)

A/C Filter Drier

from

$47.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Behr – A/C Temp. Switch (Part No.R105529376BEH)

A/C Temp. Switch

from

$47.36
A/C Temp. Switch

Worldpac – AUXILIARY FAN RESIST (Part No.G504051923VMO)

AUXILIARY FAN RESIST

from

$37.50
AUXILIARY FAN RESIST

ACM – Air Conditioning Temperature Switch (Part No.R105529376ACM)

Air Conditioning Temperature Switch

from

$32.44
ACM is a supplier of Original Equipment quality climate control products. Located on receiver drier for auxiliary cooling fan. Identified by 2 spade terminals on short pigtail with red base.
See More

Carquest Premium – HVAC Pressure Switch (Part No.ACA1572)

HVAC Pressure Switch

from

$27.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
  • All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
See More

Santech – A/C Pressure Switch (Part No.R1054178181SII)

A/C Pressure Switch

from

$20.70
A/C Pressure Switch

Santech – A/C Manifold Gasket (Part No.R1115749573SII)

A/C Manifold Gasket

from

$16.79
A/C Manifold Gasket

ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)

Air Conditioning Manifold Seal Kit

from

$6.13
ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.
See More

Most Sold 1989 Mercedes-Benz 300SEL HVAC Electrical Parts

Explore our best-selling Mercedes-Benz parts for the 1989 300SEL among 1 OEM and aftermarket options starting from $420.22.

Programa – HVAC Control Module (Part No.R205949491PRO)

HVAC Control Module

from

$420.22
Remanufactured Programa specializes in BMW, Mercedes Benz, Volvo, Porsche and Saab remanufactured ignition control units. Remanufacturing Process:

Product Features:
  • Complete visual inspection.
  • Boards and components are repaired or replaced.
  • Any test that fails to meet OEM specifications is repaired or replaced.
  • Once the ICU meets all OEM specifications, the unit is reassembled, sealed and packaged.
See More

Top-Rated Cooling and Climate Controls Brands For Your 1989 Mercedes-Benz 300SEL

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1989 Mercedes-Benz 300SELs. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Factory Air, and more. Cooling and Climate Controls from these brands that fit a 1989 300SEL start at just $0.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1989 Mercedes-Benz 300SEL Cooling and Climate Controls

When it comes to maintaining or upgrading your 1989 Mercedes-Benz 300SEL, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1989 Mercedes-Benz 300SEL. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ
from
$38.99
This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular Carquest Premium 1989 Mercedes-Benz 300SEL Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1989 Mercedes-Benz 300SEL owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1989 300SEL, Advance Auto Parts carries a full inventory of 19 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Mercedes-Benz in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $8.79 to $668.99, plus, with more than 78 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

HVAC Blower Motor Resistor
from
$668.99
This product is not rated

HVAC Blower Motor Resistor

“”

Standard Thermostat: 160 Degrees
from
$21.99
This product is not rated

Standard Thermostat: 160 Degrees

“”

Radiator Cap Tester Adapter
from
$14.29
This product is not rated

Radiator Cap Tester Adapter

“”

FAQs for 1989 Mercedes-Benz 300SEL Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1989 Mercedes-Benz 300SELs?

Out of 76 Cooling and Climate Controls that fit 1989 Mercedes-Benz 300SELs, the following parts are the top sellers:

What’s the price range for 1989 Mercedes-Benz 300SEL Cooling and Climate Controls?

Cooling and Climate Control prices for the 1989 Mercedes-Benz 300SEL start at $0.99 and go up to $668.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1989 Mercedes-Benz 300SEL?

The average price for Cooling and Climate Controls for the 1989 Mercedes-Benz 300SEL is $81.47. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Mercedes-Benz 300SEL model years?

Yes, we currently carry Cooling and Climate Controls for 14 model years of Mercedes-Benz 300SELs between 1963 and 1991. Cooling and Climate Controls are bought most frequently for the following model years: 1991, 1990, 1988, 1973, 1972, 1971, 1970, 1969, and 1968.

What are the cheapest Cooling and Climate Controls for my 1989 Mercedes-Benz 300SEL?

The cheapest 1989 Mercedes-Benz 300SEL Cooling and Climate Controls we carry in stock are:

What are the top-rated Cooling and Climate Controls that fit the 1989 Mercedes-Benz 300SEL?

Out of 380 reviews by customers, our 1989 Mercedes-Benz 300SEL Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1989 Mercedes-Benz 300SEL and their top-rated products:

What types of Cooling and Climate Controls do you sell for my 1989 Mercedes-Benz 300SEL?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1989 Mercedes-Benz 300SEL:

Can I get help with 1989 Mercedes-Benz 300SEL Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Cooling and Climate Controls and more.

What is your return policy for Mercedes-Benz 300SEL Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz 300SEL Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.