1989 Mercedes-Benz 190D Cooling and Climate Controls

Name: Standard Thermostat: 180 Degrees
Brand: Carquest Premium
SKU: 13588
Price: 22.99 USD
Rating: 3.5 (2 reviews)

Below you will find various in-demand Mercedes-Benz Cooling and Climate Controls, components and accessories for your 1989 190D. Advance Auto Parts has popular 190D parts like Engine Cooling Parts, Heating Parts, Blower Motor and Related Products and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other 190D model years including 1984, 1985, 1986, 1987, 1988 and more. Select a category of 1989 Mercedes-Benz 190D Cooling and Climate Controls below and start saving instantly.

Popular 1989 Mercedes-Benz 190D Cooling and Climate Controls Categories

Coolant Temperature Sensors

Heater Cores

Coolant Reservoir Caps

AC Line O-Rings

Radiator Fan Control Relays

AC Relay Connectors

Engine Auxiliary Water Pumps

AC Clutch Coil Connectors

Accumulator and Receiver Driers

AC O-Ring and Gasket Kits

Temperature Switch and Senders

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Drain Plugs

AC Compressor Pressure Switches

Engine Coolant Temperature Sensor O-Rings

AC Refrigerant Pressure Sensors

Coolant Level Sensors

AC Temperature Control Switches

Radiator Cap Adapters

AC Compressor Seals

Thermostat – Optional Replacements

Coolant Level Sensor O-Rings

AC Compressor Speed Sensors

HVAC Blower Fan Sensor

Essential Cooling and Climate Controls for 1989 Mercedes-Benz 190Ds

from

$22.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$47.36

A/C Temp. Switch

from

$292.50

The Visco® clutch has the task of making the frictional connection to the fan wheel depending on the temperature, and influencing its speed. The drive torque is transferred by means of wear-free viscous friction to the fan wheel, the continuously variable speed of which is set on the basis of the operating conditions. In the case of the electrically-driven Visco® clutch, control takes place directly via sensors. Requirement-based cooling optimizes the coolant temperature, engine noise and fuel consumption.

Product Features:

Out of box, drop in replacements
Factory mounts for easy install
Exact fit
Reduced labor time
Higher customer satisfaction

from

$159.94

Nissens manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.

Product Features:

OEM Quality Direct fit Application
Meets or exceeds OEM specifications.
Utilizes the factory style mounts, connectors and fittings.
Provides exceptional reliability.

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$46.66

A/C ACC Temp Sensor

from

$20.70

A/C Pressure Switch

from

$28.65

A.P.A. URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components.

from

$59.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$54.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$88.15

The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
High quality cast aluminum.
Advanced bearing design for high axial and radial stresses.
Unitized sealing technology that ensures optimal leak tightness and longevity.
Optimum cooling performance and longevity.

from

$6.13

ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.

from

$18.49

URO Parts has been a leading brand of replacement auto parts for European vehicles for more than thirty years. Affordable yet dedicated to quality, URO Parts controls its production process in strict accordance with ISO/TS 16949 QMS specifications and offers a wide variety of components used to restore or repair engine, electrical, drive train, braking, steering, suspension, climate control, cooling, exhaust, and fuel systems in classic to late-model German, British, and Scandinavian vehicles. Looking for parts that are even higher quality than original equipment? URO Parts engineers analyze common failures and identify weaknesses in original equipment parts when creating URO Premium components, which are superior to OE in performance and reliability thanks to improved materials and more robust designs. Thanks to high-quality, competitively-priced URO Parts and bulletproof URO Premium replacement components, owning a prestigious European vehicle is no longer an expensive luxury reserved for the elite and wealthy.

Product Features:

Guaranteed Fitment
High Quality Materials
Designed and tested to provide a long life
Guaranteed fitment
Replacement of failed A/C refrigerant pressure sensor restores proper system operation
Direct-fit OE replacement design is easily installed
Easy plug-and-play wiring connection
Manufactured using high-quality polymer and corrosion-resistant metal materials to withstand A/C system heat
Alloy conductors minimize electrical resistance for accurate operation
Designed and tested for reliability and long life

from

$18.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$8.14

Radiator Drain Plug

from

$11.99

This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.49

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$27.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$16.62

Radiator Cap

from

$59.87

The Meyle expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:

OE-Equivalent and Direct Fit for easy Installation.
OE style connections and fittings.
Made of highly durable materials.
Resistant to thermal wear and cracking.

from

$39.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$17.99

This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$367.99

Black Magic Electric Fan

from

$109.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$14.29

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$39.49

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
Constructed with premium materials for durability
Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
Application specific for this vehicle

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

Upgrade your 1989 Mercedes-Benz 190D with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1989 Mercedes-Benz 190D, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Cooling and Climate Controls are key to keeping your 190D functioning at its best. At Advance Auto Parts, we offer a wide selection of 47 Cooling and Climate Controls for the 1989 Mercedes-Benz 190D, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Heating Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1989 Mercedes-Benz 190D at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.99 to $367.99, with an average price of $55.23. Our 47 Cooling and Climate Controls in stock come from 21 trusted brands, so you’re sure to find the right part for your 1989 Mercedes-Benz 190D without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 Mercedes-Benz 190D, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Carquest Premium Factory Air, and more. Carquest Premium Cooling and Climate Controls start at just $8.79 and boast an impressive 4.4 stars average rating from customers. With 27 customer reviews and counting, our 1989 Mercedes-Benz 190D Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1989 Mercedes-Benz 190D is always ready to roll. We’re committed to providing you with everything you need to keep your 190D in top shape, all in one place. Start shopping confidently below for your 1989 Mercedes-Benz 190D!

Best-Selling Engine Cooling Parts for 1989 Mercedes-Benz 190Ds

Enhance the driving experience in your Mercedes-Benz with 28 quality Engine Cooling Part components, starting at $3.46.

show more show less

from

$9.49

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$8.79

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$22.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$6.39

Dorman’s Engine Oil Drain Plug Gaskets are conveniently available in packs of varying quantities. Many styles are offered, including Copper, Aluminum, Nylon, Metal/Rubber, Inset, Fiber and Crush gaskets. Replacement is recommended at every oil change. Oil filter caps are available separately.

Product Features:

Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
Gaskets are also included with many of Dorman’s Engine Oil Drain Plugs and Pans
Made to specific sizes and standards to ensure a proper fit
Designed and constructed to strict engineering quality standards

from

$14.29

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$60.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$11.49

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$119.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$88.15

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
High quality cast aluminum.
Advanced bearing design for high axial and radial stresses.
Unitized sealing technology that ensures optimal leak tightness and longevity.
Optimum cooling performance and longevity.

from

$16.62

Radiator Cap

from

$367.99

Black Magic Electric Fan

from

$292.50

Out of box, drop in replacements
Factory mounts for easy install
Exact fit
Reduced labor time
Higher customer satisfaction

from

$161.78

Built to meet the latest OE manufacturer-specified designs, MTC Auxiliary Water Pumps are the best way to make sure you have the proper heat protection for the engine in your vehicle. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

OE Quality, reliability and service life
Leak-proof sealing of the drive
Fuel savings and reduced emissions
Cooling even without operation of the engine
CO²-reduction by optimized efficiency, speed control and reduced weight
Coverage of a wide hydraulic performance range
Reduced noise level

from

$119.99

Trimline Straight Blade Electric Fan

from

$114.68

Fan Clutch

from

$109.99

from

$59.99

from

$59.87

The Meyle expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:

OE-Equivalent and Direct Fit for easy Installation.
OE style connections and fittings.
Made of highly durable materials.
Resistant to thermal wear and cracking.

from

$50.13

Coolant Level Sensor

from

$39.49

Matches OE form, fit and function
Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
Constructed with premium materials for durability
Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
Application specific for this vehicle

from

$38.99

Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Resistant to cracking and wear from heat cycles preventing coolant loss
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$32.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$30.99

from

$28.65

from

$18.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$8.14

Radiator Drain Plug

from

$7.65

Radiator Cap

from

$3.46

Coolant Sensor O-Rin

Top Picks for 1989 Mercedes-Benz 190D Blower Motor and Related Products

Upgrade Mercedes-Benz 190Ds with top-quality Blower Motor and Related Products parts, including 1 OEM and aftermarket selections for your 1989 model.

show more show less

from

$46.66

A/C ACC Temp Sensor

In-Demand Air Conditioning Parts for 1989 Mercedes-Benz 190Ds

Select from 17 premium Air Conditioning Parts parts for your 1989 Mercedes-Benz 190D, with prices ranging from $0.99 to $92.99.

show more show less

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$17.99

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$0.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$35.56

Behr GmbH & Co. KG, Stuttgart, is a specialist for automotive air conditioning and engine cooling systems, the Behr Group is one of the world’s leading manufacturers and suppliers of Original Equipment cooling and air conditioning products for European passenger and commercial vehicles. 2 bar low pressure and 30 bar high pressure binary switch. This switch is designed to be compatible with R-12 and R134a refrigerants. Located on receiver-drier with 2 spade terminals. Used for compressor cut-out.

from

$11.99

Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$54.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$92.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$50.53

A/C Expansion Valve

from

$47.36

A/C Temp. Switch

from

$39.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$37.50

AUXILIARY FAN RESIST

from

$27.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$20.70

A/C Pressure Switch

from

$18.49

Guaranteed Fitment
High Quality Materials
Designed and tested to provide a long life
Guaranteed fitment
Replacement of failed A/C refrigerant pressure sensor restores proper system operation
Direct-fit OE replacement design is easily installed
Easy plug-and-play wiring connection
Manufactured using high-quality polymer and corrosion-resistant metal materials to withstand A/C system heat
Alloy conductors minimize electrical resistance for accurate operation
Designed and tested for reliability and long life

from

$6.13

ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.

Top-Rated Cooling and Climate Controls Brands For Your 1989 Mercedes-Benz 190D

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1989 Mercedes-Benz 190Ds. Below you’ll find some of our best rated Cooling and Climate Controls from Carquest Premium and Factory Air, and more. Cooling and Climate Controls from these brands that fit a 1989 190D start at just $8.79 and are rated as high as 4.4 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 1989 Mercedes-Benz 190D Cooling and Climate Controls

When it comes to maintaining or upgrading your 1989 Mercedes-Benz 190D, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Cooling and Climate Controls, specifically designed for the 1989 Mercedes-Benz 190D. With over 2 Carquest Premium brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.79, with an average price of just $9.14. Plus, with over 19 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $8.79

(16)

Radiator Cap: 20 PSI

“Purchased radiator offline and this cap worked perfect on it.”

from $9.49

(3)

Radiator Cap: 20 PSI

“Great”

Popular Factory Air 1989 Mercedes-Benz 190D Cooling and Climate Controls

Factory Air auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1989 Mercedes-Benz 190D owner should feel confident when installing genuine Factory Air parts in their vehicle. To ensure the best fit and performance for your 1989 190D, Advance Auto Parts carries a full inventory of 1 Factory Air Cooling and Climate Controls. Plus you will be keeping your Mercedes-Benz in peak condition while saving money because prices on these Factory Air Cooling and Climate Controls range up to $16.99, plus, with more than 6 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $16.99

(6)

Cap & Valve A/C System Seal Kit

“Good product and price.”

FAQs for 1989 Mercedes-Benz 190D Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1989 Mercedes-Benz 190Ds?

Out of 47 Cooling and Climate Controls that fit 1989 Mercedes-Benz 190Ds, the following parts are the top sellers:

Cap & Valve A/C System Seal Kit (15890308) – $16.99
5-Wire Style Relay (22148718) – $17.99
Engine Oil Drain Plug Gasket (12073270) – $6.39

What’s the price range for 1989 Mercedes-Benz 190D Cooling and Climate Controls?

Cooling and Climate Control prices for the 1989 Mercedes-Benz 190D start at $0.99 and go up to $367.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1989 Mercedes-Benz 190D?

The average price for Cooling and Climate Controls for the 1989 Mercedes-Benz 190D is $55.23. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Mercedes-Benz 190D model years?

Yes, we currently carry Cooling and Climate Controls for 4 model years of Mercedes-Benz 190Ds between 1984 and 1988. Cooling and Climate Controls are bought most frequently for the following model years: 1988, 1987, 1986, 1985, and 1984.

What are the cheapest Cooling and Climate Controls for my 1989 Mercedes-Benz 190D?

The cheapest 1989 Mercedes-Benz 190D Cooling and Climate Controls we carry in stock are:

Green Round O-Ring, sold by each (18890254) – $0.99
Green Round O-Ring, sold by each (18890169) – $1.99
Green Round O-Ring, sold by each (18890821) – $1.99
Coolant Sensor O-Rin (11974183) – $3.46
Air Conditioning Manifold Seal Kit (10766769) – $6.13

What are the top-rated Cooling and Climate Controls that fit the 1989 Mercedes-Benz 190D?

Out of 27 reviews by customers, our 1989 Mercedes-Benz 190D Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1989 Mercedes-Benz 190D and their top-rated products:

Air Conditioning Parts
- Cap & Valve A/C System Seal Kit (15890308) – $16.99
Engine Cooling Parts
- Cap & Valve A/C System Seal Kit (15890308) – $16.99

What types of Cooling and Climate Controls do you sell for my 1989 Mercedes-Benz 190D?

As of 4/10/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1989 Mercedes-Benz 190D:

Can I get help with 1989 Mercedes-Benz 190D Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Cooling and Climate Controls and more.

What is your return policy for Mercedes-Benz 190D Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz 190D Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1989 Mercedes-Benz 190D Cooling and Climate Controls

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13588)

Behr – A/C Temp. Switch (Part No.R105529376BEH)

Behr – Hella Service Visco® Engine Cooling Fan clutch (Part No.G501081391BEH)

Nissens – Nissens Heater Core (Part No.R300057789NSS)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Mahle – A/C ACC Temp Sensor (Part No.R107526553MAH)

Santech – A/C Pressure Switch (Part No.R1054178181SII)

APA/URO Parts – Coolant Level Sensor (Part No.G105016387APA)

Carquest Premium – Daytime Running Light Relay (Part No.RLC1001)

Carquest Premium – A/C Filter Drier (Part No.T33400)

Geba – Water Pump (Part No.G3000948841GEB)

ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)

URO Parts – AC Pressure Switch (Part No.0048206810)

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1249)

Behr – Radiator Drain Plug (Part No.G106034117BEH)

Dorman – Electrical Harness – 2-Wire GM A/C Clutch with Diode (Part No.85143)

Rein – Cap-Expansion Tank (Part No.CPE0026P)

Carquest Premium – HVAC Pressure Switch (Part No.ACA1572)

Rein – Radiator Cap (Part No.G101030351RIN)

Meyle – Meyle Expansion Tank (Part No.G103029651MEY)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38750)

Dorman – 5-Wire Style Relay (Part No.85170)

Flex A Lite – Black Magic Electric Fan (Part No.180)

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1763)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Beck/Arnley – Thermostat, 176 Degrees Fahrenheit (Part No.143-0823)

Factory Air – Green Round O-Ring, sold by each (Part No.24615)

Factory Air – Green Round O-Ring, sold by each (Part No.24650)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10335)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10235)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13588)

Dorman – Engine Oil Drain Plug Gasket (Part No.A6120831514DOR)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Dorman – Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-643)

Rein – Cap-Expansion Tank (Part No.CPE0026P)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2205)

Geba – Water Pump (Part No.G3000948841GEB)

Rein – Radiator Cap (Part No.G101030351RIN)

Flex A Lite – Black Magic Electric Fan (Part No.180)

Behr – Hella Service Visco® Engine Cooling Fan clutch (Part No.G501081391BEH)

MTC – MTC, Auxiliary Water Pump, NLA 1.19 (Part No.G305011908MTC)

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)

Autopart International Inc – Fan Clutch (Part No.G50101946805API)

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1763)

Carquest Premium – Daytime Running Light Relay (Part No.RLC1001)

Meyle – Meyle Expansion Tank (Part No.G103029651MEY)

Hella – Coolant Level Sensor (Part No.G105016387HEL)

Beck/Arnley – Thermostat, 176 Degrees Fahrenheit (Part No.143-0823)

Rein – Expansion Tank (Part No.EPT0007)

Motorad – Standard Thermostat: 185 Degrees (Part No.251-185)

Carquest Premium – Engine Coolant Temperature Sender (Part No.WTA1502)

APA/URO Parts – Coolant Level Sensor (Part No.G105016387APA)

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1249)

Behr – Radiator Drain Plug (Part No.G106034117BEH)

APA/URO Parts – Radiator Cap (Part No.G101030351APA)

CRP – Coolant Sensor O-Rin (Part No.G105112427CRP)

Nissens – Nissens Heater Core (Part No.R300057789NSS)

Mahle – A/C ACC Temp Sensor (Part No.R107526553MAH)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Dorman – 5-Wire Style Relay (Part No.85170)

Factory Air – Green Round O-Ring, sold by each (Part No.24650)

Factory Air – Green Round O-Ring, sold by each (Part No.24610)

Factory Air – Green Round O-Ring, sold by each (Part No.24615)

Behr – A/C Pressure Switch (Part No.R1054178181BEH)

Dorman – Electrical Harness – 2-Wire GM A/C Clutch with Diode (Part No.85143)

Carquest Premium – A/C Filter Drier (Part No.T33400)

Carquest Premium – A/C Compressor Speed Sensor (Part No.ACC1605)

Autopart International Inc – A/C Expansion Valve (Part No.R10453349390API)

Behr – A/C Temp. Switch (Part No.R105529376BEH)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38750)

Worldpac – AUXILIARY FAN RESIST (Part No.G504051923VMO)

Carquest Premium – HVAC Pressure Switch (Part No.ACA1572)

Santech – A/C Pressure Switch (Part No.R1054178181SII)

URO Parts – AC Pressure Switch (Part No.0048206810)

ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)