1989 Jeep Comanche Wheel Bearings
More 1989 Jeep Comanche Wheel Bearings
Find your specific 1989 Jeep Comanche original or aftermarket Wheel Bearings below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1989 Jeep Comanche Wheel Bearings
Crown Auto Jeep Replacmnt – For Use With Dana 35 Rear Axle Or 44 Rear Axle (Part No.83503064)
from
$64.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-A-10)
from
$19.49
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-5707)
from
$13.79
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-6408)
from
$11.29
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
National – Cylindrical Bearing (Part No.6408)
from
$21.99
Manufactured with premium-grade steel, National® cylindrical bearings are designed and engineered to meet OE specifications.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly: Front, 5 Studs (Part No.513084)
from
$147.99
Product Features:
See More
- EXTENDED SERVICE LIFE – Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT – Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL – Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION – Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Dorman – Wheel Bearing and Hub Assembly: Front, 5 Studs (Part No.951-038)
from
$139.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.
Product Features:
See More
Product Features:
- Complete repair – this assembly includes the wheel hub and application-specific bearing components
- Saves time – eliminates work required to remove individual corroded components
- Reliable fit – precision-engineered to match the dimensions of original equipment
- Trustworthy quality – engineered and tested in the United States
Carquest Premium – Hub Assembly with Wheel Bearing 91-45439 (Part No.91-45439)
from
$132.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
Driveworks – Wheel Hub Assembly (Part No.NT513107)
from
$79.99
Driveworks Wheel hub assemblies & Bearings are integrated designed, they will meet your specific vehicle application and also provide the same or better performance, durability, and reliability you expect from OE. The inside ball or tapered bearing sealed with lifetime lubrication supports the vehicle’s rolling weight and provides a smooth and quiet rotation of the wheel. The design also enables lower total system cost, easier installation and longer service lifetime. The Wheel hub assemblies & Bearings come complete with new wheel studs, hub and bearings. The assembly also includes new ABS Wheel Sensors where applicable.
Product Features:
See More
Product Features:
- High quality materials ensure long service life
- Integral raceway provides proper clearance between the roller and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Broad range of designs and custom-tailored to specific applications and operating conditions
- ABS Components and Bearing Preload 100% Tested To OE Specs
- Premium seals, both inboard and outboard, protect the bearing
- Brand may vary by location
Driveworks – Wheel Hub Assembly (Part No.NT513084)
from
$92.99
DRIVEWORKS Wheel Hub assemblies are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hub assemblies are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hub assemblies. DRIVEWORKS Wheel Hub assemblies come complete with wheel studs, hub and bearings where applicable. ABS Wheel Sensors are also provided where applicable.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Integral raceway provides proper clearance between the ball and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Quality ABS leads are 100% tested to ensure longevity and performance (where applicable)
- Go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components (where applicable)
- Brand may vary by location
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 19 Spline Outer Stubs – Non-Engraved Caps (Part No.29079)
from
$429.99
Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Non-engraved caps..
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 19 spline outer axles
- Includes two drive flanges, two caps and all necessary hardware
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 30 Spline Outer Stubs – Non-Engraved Caps (Part No.29066)
from
$436.99
Yukon hardcore drive flange kit for Dana 44, 30 spline outer stubs. Non-engraved caps.
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 30 spline outer axles
- Includes two drive flanges, two caps and all necessary hardware
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 30 Spline Outer Stubs – Engraved Caps (Part No.29065)
from
$429.99
Yukon hardcore drive flange kit for Dana 44, 30 spline outer stubs. Yukon engraved caps.
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 30 spline outer axles
- Includes two drive flanges, two Yukon engraved caps and all necessary hardware
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 19 Spline Outer Stubs – Engraved Caps (Part No.29080)
from
$429.99
Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Yukon engraved caps.
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 19 spline outer axles
- Includes two drive flanges, two Yukon engraved caps and all necessary hardware
Yukon Gear – Hardcore Drive Flange, 30 Spline Inner, 48 Spline Outer (Part No.29075)
from
$129.99
Drive flange, 30 spline inner, 48 spline outer.
Product Features:
See More
Product Features:
- Drive flange
- Fits Dana 44
- 30 spline
- One single flange
Yukon Gear – Drive Flange, 19 Spline Inner, 48 Spline Outer (Part No.29078)
from
$129.99
Drive flange, 19 spline inner, 48 spline outer.
Product Features:
See More
Product Features:
- Drive flange
- Fits Dana 44
- 19 spline
- One single flange
Dorman – Hub And Bearing Mounting Bolts (Part No.917-509)
from
$30.99
Wheel hub bolts rounded off or have damaged threads? These wheel hub bolts are designed to match the performance of original equipment bolts to secure the hub to the knuckle/spindle on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – these wheel hub bolts are designed to match the performance of the original bolts on specified vehicles
- Ideal solution – made of durable materials to reliably replace bolts with rounded-off or damaged threads
- Application-specific – precision-manufactured to securely mount the hub to the vehicle knuckle/spindle
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Wheel Hub Mounting Bolt (Part No.97250)
from
$7.99
Wheel hub bolts rounded off or have damaged threads? These wheel hub bolts are designed to match the performance of original equipment bolts to secure the hub to the knuckle/spindle on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – these wheel hub bolts are designed to match the performance of the original bolts on specified vehicles
- Ideal solution – made of durable materials to reliably replace bolts with rounded-off or damaged threads
- Application-specific – precision-manufactured to securely mount the hub to the vehicle knuckle/spindle
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Driveworks – Taper Bearing Cup (Part No.S-M-86610)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
SKF – Wheel Bearing Race (Part No.K8002345514SKF)
from
$6.77
The SKF Wheel Bearing Race is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Popular 1989 Jeep Comanche Wheel Bearings Categories
1989 Jeep Comanche Wheel Bearings
Maybe you’re in the middle of a full rebuild of that 1989 Jeep Comanche. Maybe you just need a couple of Wheel Bearings. Either way, Advance Auto Parts has 20 different Wheel Bearings in our inventory ranging from $4.99 to $436.99. That means you can find the exact parts or products you need to keep that 1989 Jeep Comanche running smoothly.
Wheel Bearings are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Jeep Comanche. National, Dorman, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Wheel Bearings for your 1989 Jeep Comanche, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 87 reviews in this category, some of the top rated parts include Wheel Bearing and Hub Assembly with 2.5 stars.
So if you’re in the market for aftermarket Wheel Bearings to keep your 1989 Jeep Comanche rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Wheel Bearings Brands To Make Your 1989 Jeep Comanche Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Jeep Comanche demands trusted brand parts and products to keep it running. Many trusted brands of Wheel Bearings make up Advance Auto Parts’ inventory, and all are ready to help make your Comanche the best it can be. Be sure to browse some of our top Wheel Bearings brands and parts.
Popular Dorman Wheel Bearings
We carry Dorman parts in our stock across Wheel Hub Screws categories, plus more. For a 1989 Jeep Comanche, our most popular Dorman Wheel Bearings include:
Top 1989 Jeep Comanche Wheel Bearings from Driveworks
Driveworks products are another trusted brand when it comes to Wheel Bearings for your 1989 Jeep Comanche. Popular Driveworks parts include:
FAQs for 1989 Jeep Comanche Wheel Bearings
What are the most purchased Wheel Bearings for the 1989 Jeep Comanche?
Out of 20 Wheel Bearings for the 1989 Jeep Comanche, the most popular in our inventory are:
What are the top-rated 1989 Jeep Comanche Wheel Bearings?
Top-rated Wheel Bearings for your 1989 Jeep Comanche based on customer reviews/ratings are:
from
$123.99
(2)
Wheel Bearing and Hub Assembly
“Materials appear to be comparable to OEM (but so did the lower grade parts I had installed 2 of within a 20,000 mile span on the same axle). Hopefully”
