1989 Jeep Cherokee Performance and Racing Products
Find Your Specific 1989 Jeep Cherokee Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 1989 Cherokee. Advance Auto Parts has popular Cherokee parts like Performance Fuel Systems, Performance Engines, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Cherokee model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 1989 Jeep Cherokee Performance and Racing Products below and start saving instantly.
Popular 1989 Jeep Cherokee Performance and Racing Products Categories
Essential Performance and Racing Products for 1989 Jeep Cherokees
Energy Suspension – Coil Spring Isolator Set (Part No.2.6103R)
from
$58.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Lasts from 3 to 10 Times Longer
- Assemble to Chassis Same Way as OEM
- Maintains Factory Ride Characteristics
- Simple Way to Increase Vehicle Height
Energy Suspension – Hyper-Flex System (Part No.2.18105G)
from
$239.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Motor Mount (Part No.2.1102R)
from
$46.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Energy Suspension – Sway Bar Bushing Set (Part No.2.5103G)
from
$41.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Control Arm Bushing Set (Part No.2.3105G)
from
$61.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Dynomax – Ultra Flo Exhaust Muffler, Universal Fit Stainless Steel, 20" L, 2.25" In, 2.25" Out, Oval (Part No.17512)
from
$211.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Omix – Thermostat Housing; 81-90 Jeep CJ/Wrangler YJ (Part No.17118.02)
from
$21.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Highly Durable
- Long Lasting
Mallory – Distributor Wiring Harness (Part No.29349)
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Energy Suspension – Control Arm Bushing Set (Part No.2.3101G)
from
$123.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Leaf Spring Bushing Set (Part No.2.2109R)
from
$90.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Omix – Idle Air Control Valve; 4.0L; 86-90 Jeep XJ/MJ/SJ (Part No.17715.06)
from
$115.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Built To Meet Or Exceed OE Specifications
- OE Style
- Direct Fit
Rugged Ridge – Heavy Duty Differential Skid Plate (Part No.16597.35)
from
$114.99
Protect your factory differential cover with these heavy duty skid plates. Designed to fit the contours of your stock differential cover and made of durable 3/16-inch black powdercoated steel, these skid plates will help you slide over obstacles.
Product Features:
See More
Product Features:
- Black Powder Coated
- 3/16 in. Steel
- Use w/ Factory Diff Cover
- Mounting Hardware Included
Rugged Ridge – Skid Plate (Part No.DMC-16597.44)
from
$205.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 in. black powder coated steel, these skid plates will help you slide over obstacles and not get hung up. Includes replacement mounting hardware and instructions. Will not fit Aluminum Housing D44A.
Product Features:
See More
Product Features:
- Black Powder Coated
- 3/16 in. Steel
- Use w/Factory Diff Cover
- Mounting Hardware Included
- Jeep Logo
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Energy Suspension – Sway Bar Bushing Set (Part No.2.5104G)
from
$41.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Shackle Bushing Set (Part No.2.2111R)
Powertrax – Lock Right Locker (Part No.2413-LR)
from
$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Powertrax – Lock Right Locker (Part No.2310-LR)
from
$359.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Accel – GM 1984-95 Remote Supercoil (Part No.140011)
from
$88.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP DR-37
- MSD 8226
- Resist Corrosion
- W/New Mounting Hardware
Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)
from
$80.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Standard Motor Products SMP Uf-198
- MSD 8228
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)
from
$102.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
Upgrade your 1989 Jeep Cherokee with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1989 Jeep Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 28 Performance and Racing Products for the 1989 Jeep Cherokee, designed to meet your needs without breaking the bank.
From
Performance Fuel System
replacements to
Performance Engines
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1989 Jeep Cherokee at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $5.99 to $359.99, with
an average price of $89.13.
Our 28 Performance and Racing Products in stock come from 7 trusted brands, so you’re sure to find the right part for your 1989 Jeep Cherokee without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 Jeep Cherokee, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, Energy Suspension, Flowmaster Inc., and more.
Mallory Performance and Racing Products
start at just $95.99 and boast an impressive 4.9 stars average rating from customers.
Energy Suspension and Flowmaster Inc. also bring quality to the table, with Performance and Racing Products available starting at $5.99, and at an average 4.4 stars rating.
With 219 customer reviews and counting, our 1989 Jeep Cherokee Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1989 Jeep Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Cherokee in top shape, all in one place.
Start shopping confidently below for your 1989 Jeep Cherokee!
Best-Selling Performance Fuel Systems for 1989 Jeep Cherokees
Enhance the driving experience in your Jeep with 1 quality Performance Fuel System components, starting at $115.99.
Omix – Idle Air Control Valve; 4.0L; 86-90 Jeep XJ/MJ/SJ (Part No.17715.06)
from
$115.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Built To Meet Or Exceed OE Specifications
- OE Style
- Direct Fit
Most Popular 1989 Jeep Cherokee Performance Engines
Customize your Jeep with 2 Performance Engines products
like Performance Water Outlets and
Performance Engine Coolant Thermostats, all
priced under $32.49.
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Omix – Thermostat Housing; 81-90 Jeep CJ/Wrangler YJ (Part No.17118.02)
from
$21.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Highly Durable
- Long Lasting
Top Picks for 1989 Jeep Cherokee Performance Exhaust Products
Upgrade Jeep Cherokees with top-quality Performance Exhaust Products parts, including 2 OEM and aftermarket selections for your 1989 model.
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942447)
from
$137.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942442)
from
$152.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
In-Demand Performance Steering Products for 1989 Jeep Cherokees
Select from 7 premium Performance Steering Products parts for your 1989 Jeep Cherokee, with prices ranging from $5.99 to $41.49.
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Sway Bar Bushing Set (Part No.2.5104R)
from
$41.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.2.5103G)
from
$41.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.2.5105R)
from
$41.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.2.5104G)
from
$41.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Most Sold 1989 Jeep Cherokee Performance Ignition Products
Explore our best-selling Jeep parts for the 1989 Cherokee among 2 OEM and aftermarket options starting from $95.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top-Rated Performance and Racing Products Brands For Your 1989 Jeep Cherokee
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1989 Jeep Cherokees. Below you’ll find some of our best rated Performance and Racing Products from Mallory, Energy Suspension, and Flowmaster Inc., and more. Performance and Racing Products from these brands that fit a 1989 Cherokee start at just $5.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1989 Jeep Cherokee Performance and Racing Products
When it comes to maintaining or upgrading your 1989 Jeep Cherokee, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1989 Jeep Cherokee. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $95.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular Energy Suspension 1989 Jeep Cherokee Performance and Racing Products
Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1989 Jeep Cherokee owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1989 Cherokee, Advance Auto Parts carries a full inventory of 1 Energy Suspension Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range up to $5.99, plus, with more than 3 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$5.99
(3)
Tie Rod Dust Boot
“Replaced the old torn boot and added a bit of color for a low cost.”
FAQs for 1989 Jeep Cherokee Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1989 Jeep Cherokees?
Out of 28 Performance and Racing Products that fit 1989 Jeep Cherokees, the following parts are the top sellers:
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
- High Performance Thermostat (22903641) – $32.49
What’s the price range for 1989 Jeep Cherokee Performance and Racing Products?
Performance and Racing Product prices for the 1989 Jeep Cherokee start at $5.99 and go up to $359.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1989 Jeep Cherokee?
The average price for Performance and Racing Products for the 1989 Jeep Cherokee is $89.13. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep Cherokee model years?
What are the cheapest Performance and Racing Products for my 1989 Jeep Cherokee?
The cheapest 1989 Jeep Cherokee Performance and Racing Products we carry in stock are:
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
- Tie Rod Dust Boot (22906873) – $6.29
- Thermostat Housing; 81-90 Jeep CJ/Wrangler YJ (10185981) – $21.49
- Shackle Bushing Set (22907455) – $25.49
What are the top-rated Performance and Racing Products that fit the 1989 Jeep Cherokee?
Out of 219 reviews by customers, our 1989 Jeep Cherokee Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1989 Jeep Cherokee and their top-rated products:
- Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
- Performance Steering Products
- Thermocap Radiator Cap (6900022) – $53.99
What types of Performance and Racing Products do you sell for my 1989 Jeep Cherokee?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1989 Jeep Cherokee:
Can I get help with 1989 Jeep Cherokee Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep Cherokee Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep Cherokee Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
