1989 Isuzu I-MARK Engine Parts
Find Your Specific 1989 Isuzu I-MARK Engine Parts
Below you will find various in-demand Isuzu Engine Parts, components and accessories for your 1989 I-MARK. Advance Auto Parts has popular I-MARK parts like Engine Mounts, Engine Internals, Engine Timing Parts and more. You’ll also find aftermarket and OEM Engine Parts for other I-MARK model years including
1981,
1982,
1983,
1984,
1985,
1986,
1987,
1988 and more. Select a category of 1989 Isuzu I-MARK Engine Parts below and start saving instantly.
Popular 1989 Isuzu I-MARK Engine Parts Categories
Essential Engine Parts for 1989 Isuzu I-MARKs
Victor Reinz – Engine Oil Pan Gasket Set (Part No.10-10399-01)
from
$16.79
Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Melling – Stock Replacement OE Type Oil Pump (Part No.M144)
from
$99.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
Melling – Stock Replacement Oil Pump: Standard Volume, Standard Pressure, Cast Iron, With Gasket (Part No.M139)
from
$85.99
Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
National – Shaft Repair Sleeve (Part No.99128)
from
$41.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Cardone – Remanufactured Engine Control Computer (Part No.77-8546)
from
$145.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100 percent computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Felpro – Engine Conversion Gasket Set (Part No.CS 9685)
from
$37.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
National – Shaft Repair Sleeve (Part No.99177)
from
$39.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)
from
$122.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool« engine oil cooler kit
- Imperial Econo-Kool® engine oil cooler kit
- Lightweight construction with high-efficiency turbulators
- Light-duty applications
- All except Chevrolet V8 applications
- Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.
Imperial – Engine Oil Cooler (Part No.241040)
from
$248.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Swirl-Cool engine oil cooler kit
- Size: 1-1/2″ x 6-1/2″ x 18″
- Heavy-duty applications
- All except Chevrolet V8 applications
- Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
- Heavy duty applications
- All except Chevrolet V8 applications
- Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
- Heavy duty applications
- All except Chevrolet V8 applications
Carquest Premium – Multi-Use Connector (Part No.ABA3459)
from
$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest – Air Charge Temperature Sensor Connector (Part No.28423)
from
$12.79
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
- Neodymium magnet produces max high voltage output at all speeds
Melling – Engine Oil Priming Tool (Part No.MPL-201)
from
$355.99
Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.
See More
Beck/Arnley – OIL FILLER CAP (Part No.016-0125)
from
$15.29
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Easy twist removal and fit for a perfect seal
- Made with premium materials
- Constructed for durability
- Application specific for this vehicle
Carquest Premium – Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10081)
from
$10.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Carquest Premium – Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10101)
from
$12.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Anchor – Engine Mount: Rear, 1 Piece (Part No.8826)
from
$52.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 85-88; GEO 89-89; ISUZU 85-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1989
- Weight approx: 4 Lbs
Anchor – Engine Mount: Front, 1 Piece (Part No.8539)
from
$39.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to ISUZU 89-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1989-1989
- Weight approx: 1 Lbs
Anchor – Engine Mount: Front, 1 Piece (Part No.8442)
from
$55.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 85-88; GEO 89-89; ISUZU 85-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1989
- Weight approx: 4 Lbs
Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)
from
$6.99
Product Features:
See More
- Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
- High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
- Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
- Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up
Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)
from
$113.99
Product Features:
See More
- Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
- High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
- Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
- Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up
Sealed Power – Engine Assembly Lubricant (Part No.55-400)
from
$10.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Formulated for prelubrication cam lobes, lifters & engine bearings
- Increases load carrying capacity
- Holds fast to surfaces
- Exacting tolerances
- Meets or exceeds OEM specifications
- 4.0 oz. Squeeze Container
National – Engine Crankshaft Seal (Part No.225020)
from
$10.29
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
- Excellent high temperature capabilities
- Compatible with wide range of fluids
- Delivers quality and reliable performance for every type of repair
National – Engine Crankshaft Seal (Part No.224025)
from
$12.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Driveworks – Manual Transmission Output Shaft Seal (Part No.S-224020)
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1103)
from
$91.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Upgrade your 1989 Isuzu I-MARK with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 1989 Isuzu I-MARK, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Isuzu or enhancing its overall performance, Engine Parts are key to keeping your I-MARK functioning at its best. At Advance Auto Parts, we offer a wide selection of 23 Engine Parts for the 1989 Isuzu I-MARK, designed to meet your needs without breaking the bank.
From
Engine Mount
replacements to
Engine Internals
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1989 Isuzu I-MARK at great prices.
Our Engine Parts inventory for this model
ranges from just $6.49 to $355.99, with
an average price of $79.66.
Our 23 Engine Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 1989 Isuzu I-MARK without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 Isuzu I-MARK, we stock popular OEM and aftermarket Engine Parts from top names
like Carquest Premium, National, Imperial, and more.
Carquest Premium Engine Parts
start at just $10.99 and boast an impressive 4.4 stars average rating from customers.
National and Imperial also bring quality to the table, with Engine Parts available starting at $39.99, and at an average 4.3 stars rating.
With 107 customer reviews and counting, our 1989 Isuzu I-MARK Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1989 Isuzu I-MARK is always ready to roll. We’re committed to providing you with everything you need to keep your I-MARK in top shape, all in one place.
Start shopping confidently below for your 1989 Isuzu I-MARK!
Best-Selling Engine Mounts for 1989 Isuzu I-MARKs
Enhance the driving experience in your Isuzu with 3 quality Engine Mount components, starting at $39.99.
Anchor – Engine Mount: Front, 1 Piece (Part No.8442)
from
$55.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 85-88; GEO 89-89; ISUZU 85-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1989
- Weight approx: 4 Lbs
Anchor – Engine Mount: Rear, 1 Piece (Part No.8826)
from
$52.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 85-88; GEO 89-89; ISUZU 85-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1989
- Weight approx: 4 Lbs
Anchor – Engine Mount: Front, 1 Piece (Part No.8539)
from
$39.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to ISUZU 89-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1989-1989
- Weight approx: 1 Lbs
Most Popular 1989 Isuzu I-MARK Engine Internals
Customize your Isuzu with 2 Engine Internals products
like Crankshaft Seals, all
priced under $7.29.
National – Multi-Purpose Seal (Part No.710308)
from
$6.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Driveworks – Manual Transmission Output Shaft Seal (Part No.S-224020)
Top Picks for 1989 Isuzu I-MARK Engine Timing Parts
Upgrade Isuzu I-MARKs with top-quality Engine Timing Parts parts, including 1 OEM and aftermarket selections for your 1989 model.
National – Shaft Repair Sleeve (Part No.99177)
from
$39.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
In-Demand Camshafts for 1989 Isuzu I-MARKs
Select from 2 premium Camshafts parts for your 1989 Isuzu I-MARK, with prices ranging from $12.79 to $20.99.
Carquest – Air Charge Temperature Sensor Connector (Part No.28423)
from
$12.79
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
- Neodymium magnet produces max high voltage output at all speeds
Carquest Premium – Multi-Use Connector (Part No.ABA3459)
from
$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Most Sold 1989 Isuzu I-MARK Engine Gaskets and Seals
Explore our best-selling Isuzu parts for the 1989 I-MARK among 2 OEM and aftermarket options starting from $16.79.
Felpro – Engine Conversion Gasket Set (Part No.CS 9685)
from
$37.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
Victor Reinz – Engine Oil Pan Gasket Set (Part No.10-10399-01)
from
$16.79
Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Top-Rated Engine Parts Brands For Your 1989 Isuzu I-MARK
Shop for the best-rated brands offering Engine Parts and other products for your 1989 Isuzu I-MARKs. Below you’ll find some of our best rated Engine Parts from Carquest Premium, National, and Imperial, and more. Engine Parts from these brands that fit a 1989 I-MARK start at just $10.99 and are rated as high as 4.4 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Premium 1989 Isuzu I-MARK Engine Parts
When it comes to maintaining or upgrading your 1989 Isuzu I-MARK, using quality Engine Parts is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Engine Parts, specifically designed for the 1989 Isuzu I-MARK. With over 2 Carquest Premium brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.99, with an average price of just $11.99. Plus, with over 28 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$10.99
(26)
Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Just what we needed to replace an oil filler cap that went missing.”
from
$12.99
(2)
Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“It’s “just an oil cap” but you can’t drive a car without one. I called, the men at the store looked it up, my neighbor picked it up for me, and I was”
Popular National 1989 Isuzu I-MARK Engine Parts
National auto parts is one of the highest quality Engine Part brands in the market. Any 1989 Isuzu I-MARK owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1989 I-MARK, Advance Auto Parts carries a full inventory of 1 National Engine Parts. Plus you will be keeping your Isuzu in peak condition while saving money because prices on these National Engine Parts range up to $39.99, plus, with more than 1 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.
from
$39.99
(1)
Shaft Repair Sleeve
“Easy to use, too early to tell how long it will last. It did stop the oil leak with a new oil seal on the front crankshaft pulley. 87 mercedes 300td.”
FAQs for 1989 Isuzu I-MARK Engine Parts
Which Engine Parts are best-sellers for 1989 Isuzu I-MARKs?
Out of 23 Engine Parts that fit 1989 Isuzu I-MARKs, the following parts are the top sellers:
- Air Charge Temperature Sensor Connector (20975509) – $12.79
- Multi-Use Connector (12443066) – $20.99
- Econo-Kool® Engine Oil Cooler (15230012) – $122.99
What’s the price range for 1989 Isuzu I-MARK Engine Parts?
Engine Part prices for the 1989 Isuzu I-MARK start at $6.49 and go up to $355.99 for the most premium parts.
What’s the average price of a Engine Part for a 1989 Isuzu I-MARK?
The average price for Engine Parts for the 1989 Isuzu I-MARK is $79.66. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other Isuzu I-MARK model years?
What are the cheapest Engine Parts for my 1989 Isuzu I-MARK?
The cheapest 1989 Isuzu I-MARK Engine Parts we carry in stock are:
- Multi-Purpose Seal (18444863) – $6.49
- Stock Replacement Engine Assembly Lubricant, 4 oz. (50175373) – $6.99
- Manual Transmission Output Shaft Seal (11493994) – $7.29
- Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (18481415) – $10.99
- Air Charge Temperature Sensor Connector (20975509) – $12.79
What are the top-rated Engine Parts that fit the 1989 Isuzu I-MARK?
Out of 107 reviews by customers, our 1989 Isuzu I-MARK Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1989 Isuzu I-MARK and their top-rated products:
- Camshafts
- Air Charge Temperature Sensor Connector (20975509) – $12.79
What types of Engine Parts do you sell for my 1989 Isuzu I-MARK?
As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 1989 Isuzu I-MARK:
Can I get help with 1989 Isuzu I-MARK Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Isuzu Engine Parts and more.
What is your return policy for Isuzu I-MARK Engine Parts?
Advance Auto Parts keeps returns simple. For new Isuzu I-MARK Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
