1989 International F2575 Shocks and Struts

Essential 1989 International F2575 Shocks and Struts

Monroe – Magnum Rear; Front Suspension Shock Absorber (Part No.66710)

Magnum Rear; Front Suspension Shock Absorber

from

$91.99
The Monroe Magnum shock absorber for class 3-6 vehicles is gas-charged for quicker response and a stable, more comfortable ride. Designed to handle the demands of high mileage and severe use vehicles, replace worn-out units with Magnum shocks to help reduce excessive vibration.

Product Features:
  • FOR HARDWORKING COMMERCIAL VEHICLES   — Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
  • FOR HARDWORKING COMMERCIAL VEHICLES áá– Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
  • CONSISTENT RIDE — All-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while 2-in. or 2-1/4-in. reserve tube holds more fluid to improve performance (when required)
  • EXCEPTIONAL HANDLING — 10-Stage valving, tuned specifically to each vehicle, adjusts to road extremes while the larger 1-3/8-in. bore provides more efficient damping control to provide consistency and a smooth ride (most applications)
  • STRONG AND DURABLE — Shouldered bushing and bonded bushing with sleeve protects from bushing walkout for improved quality; arc welds up to 360░ for durability
  • STRONG AND DURABLE — Shouldered bushing and bonded bushing with sleeve protects from bushing walkout for improved quality; arc welds up to 360° for durability
  • BUILT TO LAST — Robust hydraulic lock-out prevents over extension of air bags, top-out of the piston and averts damage to seal assembly (on most applications)
  • LONGER SERVICE LIFE — Bearing with PTFE coating reduces friction between rod and rod guide combined with nitrocarburized piston rod provides durability and longer service life (most applications)
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Delivers exceptional control and isolates impact-related noise, vibration, and harshness under most driving conditions
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
See More

Bulldog HD – Heavy-Duty Shock Absorber – 2003-2016 IC Corporation RE School Bus (Part No.HD1214-0545)

Heavy-Duty Shock Absorber - 2003-2016 IC Corporation RE School Bus

from

$50.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.

Product Features:
  • Robotic 360 Degree Welds; Highest Weld Strength in the Industry
  • Propriety Value Design for long lasting compression and rebound performance
  • Brushing rubber formulation with lowest levels of filler
  • OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
  • Double lip seal design to reduce excessive misting and extend damping life cycle
See More

Monroe – Magnum Rear Suspension Shock Absorber (Part No.66638)

Magnum Rear Suspension Shock Absorber

from

$87.99
The Monroe Magnum shock absorber for class 3-6 vehicles is gas-charged for quicker response and a stable, more comfortable ride. Designed to handle the demands of high mileage and severe use vehicles, replace worn-out units with Magnum shocks to help reduce excessive vibration.

Product Features:
  • FOR HARDWORKING COMMERCIAL VEHICLES   — Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
  • FOR HARDWORKING COMMERCIAL VEHICLES áá– Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
  • CONSISTENT RIDE — All-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while 2-in. or 2-1/4-in. reserve tube holds more fluid to improve performance (when required)
  • EXCEPTIONAL HANDLING — 10-Stage valving, tuned specifically to each vehicle, adjusts to road extremes while the larger 1-3/8-in. bore provides more efficient damping control to provide consistency and a smooth ride (most applications)
  • STRONG AND DURABLE — Shouldered bushing and bonded bushing with sleeve protects from bushing walkout for improved quality; arc welds up to 360░ for durability
  • STRONG AND DURABLE — Shouldered bushing and bonded bushing with sleeve protects from bushing walkout for improved quality; arc welds up to 360° for durability
  • BUILT TO LAST — Robust hydraulic lock-out prevents over extension of air bags, top-out of the piston and averts damage to seal assembly (on most applications)
  • LONGER SERVICE LIFE — Bearing with PTFE coating reduces friction between rod and rod guide combined with nitrocarburized piston rod provides durability and longer service life (most applications)
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Delivers exceptional control and isolates impact-related noise, vibration, and harshness under most driving conditions
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
See More

Monroe – Magnum Shock Absorber (Part No.65409)

Magnum Shock Absorber

from

$123.99
The Monroe Magnum shock absorber for class 6-8 vehicles is the first gas-charged, large-bore shock for air spring and taper leaf suspensions. The nitrogen gas charge provides the fast response essential for today’s heavy truck suspension systems.

Product Features:
  • FOR HARDWORKING COMMERCIAL VEHICLES — Designed to handle the demands of high mileage and severe use class 6-8 trucks and buses
  • CONSISTENT RIDE — All-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger 2-3/8-in. reserve tube holds more fluid to improve performance (most applications)
  • EXCEPTIONAL HANDLING — 10-Stage valving, tuned specifically to each vehicle, adjusts to road extremes while the larger 1-3/4-in. bore provides more efficient damping control to provide consistency and a smooth ride (most applications)
  • STRONG AND DURABLE — Shouldered bushing and bonded bushing with sleeve protects from bushing walkout for improved quality; arc welds up to 360░ for durability
  • STRONG AND DURABLE — Shouldered bushing and bonded bushing with sleeve protects from bushing walkout for improved quality; arc welds up to 360° for durability
  • BUILT TO LAST — Robust hydraulic lock-out prevents over extension of air bags, top-out of the piston and averts damage to seal assembly (most applications)
  • LONGER SERVICE LIFE — Bearing with PTFE coating reduces friction between rod and rod guide combined with nitrocarburized piston rod provides durability and longer service life (most applications)
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Delivers exceptional control and isolates impact-related noise, vibration and harshness under most driving conditions
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • Single-lip, low-friction oil seal
See More

Bulldog HD – Heavy-Duty Shock Absorber – 1987-1992 International 1452SC (Part No.HD1215-0028)

Heavy-Duty Shock Absorber - 1987-1992 International 1452SC

from

$79.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.

Product Features:
  • Robotic 360 Degree Welds; Highest Weld Strength in the Industry
  • Propriety Value Design for long lasting compression and rebound performance
  • Brushing rubber formulation with lowest levels of filler
  • OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
  • Double lip seal design to reduce excessive misting and extend damping life cycle
See More

Monroe – Magnum Front; Rear Suspension Shock Absorber (Part No.66923)

Magnum Front; Rear Suspension Shock Absorber

from

$77.99
The Monroe Magnum shock absorber for class 3-6 vehicles is gas-charged for quicker response and a stable, more comfortable ride. Designed to handle the demands of high mileage and severe use vehicles, replace worn-out units with Magnum shocks to help reduce excessive vibration.

Product Features:
  • FOR HARDWORKING COMMERCIAL VEHICLES   — Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
  • FOR HARDWORKING COMMERCIAL VEHICLES áá– Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
  • CONSISTENT RIDE — All-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while 2-in. or 2-1/4-in. reserve tube holds more fluid to improve performance (when required)
  • EXCEPTIONAL HANDLING — 10-Stage valving, tuned specifically to each vehicle, adjusts to road extremes while the larger 1-3/8-in. bore provides more efficient damping control to provide consistency and a smooth ride (most applications)
  • STRONG AND DURABLE — Shouldered bushing and bonded bushing with sleeve protects from bushing walkout for improved quality; arc welds up to 360░ for durability
  • STRONG AND DURABLE — Shouldered bushing and bonded bushing with sleeve protects from bushing walkout for improved quality; arc welds up to 360° for durability
  • BUILT TO LAST — Robust hydraulic lock-out prevents over extension of air bags, top-out of the piston and averts damage to seal assembly (on most applications)
  • LONGER SERVICE LIFE — Bearing with PTFE coating reduces friction between rod and rod guide combined with nitrocarburized piston rod provides durability and longer service life (most applications)
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Delivers exceptional control and isolates impact-related noise, vibration, and harshness under most driving conditions
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
See More

Monroe – Magnum Shock Absorber (Part No.74406)

Magnum Shock Absorber

from

$137.99
Tough Monroe® Magnum shock absorbers for transit buses deliver a firm, controlled ride for greater stability and increased driver comfort. Designed to meet or exceed demanding OE manufacturer specifications

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 1-3/4-inch (44.6 mm) Bore Larger bore gives accessibility to finer tune the valving by allowing more hydraulic fluid to dissipate heat for better vehicle control
  • 2-3/4-inch (69.85 mm) Reserve Tube More fluid for more consistent performance – when required
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • All weather fluid Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
See More

1989 International F2575 Shocks and Struts

Maybe you’re in the middle of a full rebuild of that 1989 International F2575. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 7 different Shocks and Struts in our inventory ranging from $50.99 to $137.99. That means you can find the exact parts or products you need to keep that 1989 International F2575 running smoothly.

Shocks and Struts are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1989 International F2575. Monroe and Bulldog HD are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Shocks and Struts for your 1989 International F2575, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Shocks and Struts to keep your 1989 International F2575 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Shocks and Struts Brands To Make Your 1989 International F2575 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 International F2575 demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your F2575 the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.

FAQs for 1989 International F2575 Shocks and Struts

What are the most purchased Shocks and Struts for the 1989 International F2575?

Out of 7 Shocks and Struts for the 1989 International F2575, the most popular in our inventory are:
Magnum Front; Rear Suspension Shock Absorber
from $77.99
This product is not rated
Magnum Front; Rear Suspension Shock Absorber
Rear Shock and Struts
Magnum Shock Absorber
from $123.99
This product is not rated
Magnum Shock Absorber
Rear Shock and Struts
Heavy-Duty Shock Absorber - 1987-1992 International 1452SC
from $79.99
This product is not rated
Heavy-Duty Shock Absorber – 1987-1992 International 1452SC
Rear Shock and Struts