from

$54.99

Remove chassis flex for better handling. Made of the highest quality materials. Offered in different finishes to dress up the engine compartment.

from

$137.99

Single or Dual bar design with integrated steel brace virtually eliminates body flex for improved handling and drivability. Solid one piece design for maximum rigidity. Reduces chassis flex and improves torsion stiffness. Improves vehicle handling and drivability characteristics. Mounts directly to strut tower with little or no modifications required. Includes comprehensive instructions and all necessary hardware. Titanium grey powder coating delivers lasting good looks. Available for upper front and or rear.

Product Features:

CS-2 dual bar design
Mounts directly with no modifications required
Includes instructions and all necessary hardware
Titanium-look grey powder coat delivers lasting good looks
Stiffens chassis and improves vehicle handling
Maximum rigidity to increase vehicle handling

from

$29.99

Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.

Product Features:

Made from HYPER-Flex Polyurethane
Gives Shock Maximum Efficiency
Add to the Performance of Every Shock
Gives Instant Response/Control to Suspension

from

$29.99

Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.

Product Features:

Made from HYPER-Flex Polyurethane
Gives Shock Maximum Efficiency
Add to the Performance of Every Shock
Gives Instant Response/Control to Suspension

from

$29.99

Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.

Product Features:

Made from HYPER-Flex Polyurethane
Gives Shock Maximum Efficiency
Add to the Performance of Every Shock
Gives Instant Response/Control to Suspension

from

$66.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$95.99

Product Features:

#1 recommended Original Equipment replacement choice for Asian performance vehicles
Specifically calibrated to help restore the original handling and control characteristics of Hondas and Acuras
Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
Triple chrome plated piston rod and multi-lip oil seals that reduce wear
Features a precision, sintered iron strut rod guide to help retain correct wheel alignment
Engineered to help vehicles with electronic safety systems (ESC, ABS, etc.)
To reduce the chance of noise and vibration KYB recommends installing new strut mounts, part number: SM5058
Protect your new struts from dirt, debris and salt with a KYB Strut Boot, part number: SB108

from

$59.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

#1 Recommended Original Equipment Replacement Choice For Asian Cars
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Honda Civic
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Number: Sm5293
Protect Your New Struts From Dirt, Debris And Salt With A KYB Strut Boot, Part Number: Sb103

from

$26.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Long-lasting performance
Restores like-new steering and handling
Engineered to meet or exceed OE requirements
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$29.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Long-lasting performance
Restores like-new steering and handling
Engineered to meet or exceed OE requirements
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$35.99

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$36.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$30.41

Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.

Product Features:

Made from premium quality cellular polyurethane
The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
KYB Bump Stop Kits suit a variety of vehicle applications
KYB Bump Stop Kits perfectly compliment KYB Struts

from

$31.49

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$6.99

Driveworks Shock Mount, Suspension Strut Bellows

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$20.99

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$91.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

#1 Recommended Original Equipment Replacement Choice For Asian Performance Vehicles
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Honda Or Acura
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Number: Sm5058
Protect Your New Struts From Dirt, Debris And Salt With A KYB Strut Boot, Part Number: Sb108

from

$65.99

Monroe® OESpectrum® shock absorbers and struts are available for popular for European, Asian and North American passenger cars, light trucks and SUVs featuring Tenneco’s latest global original equipment valving technologies designed with the right technology specific for each application. OESpectrum shocks and struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness. They are backed by Monroe’s Limited Lifetime Warranty and Feel the Difference Guarantee.

Product Features:

All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
Twin Technology: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
Hardened and Chrome Plated Piston Rod: Long service life.
Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$68.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

#1 Recommended Original Equipment Replacement Choice For Asian Cars
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Honda Or Acura
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Number: Sm5059