1989 Eagle Summit Ignition and Tune-Up Products
More 1989 Eagle Summit Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1989 Eagle Summit, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1989 Eagle Summit Ignition and Tune-Up Products
Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1904)
from
$11.49
Distributor Cap and Rotor Kit
Carquest Premium – Distributor Cap (Part No.CAC1611)
from
$22.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
NGK – Ignition Wire Set (Part No.F1020115941NGK)
from
$52.06
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
NGK – Ignition Wire Set (Part No.F1020115946NGK)
from
$62.81
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
Carquest Premium – Distributor Rotor (Part No.DAA1218)
from
$14.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Rotor (Part No.DAA1223)
from
$3.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Accel – Lts 8Mm Thundersport Cust Fit Yel (Part No.7920Y)
from
$59.99
Ferro-spiral core. For street or strip use. OE-type spark plug boots. Stainless steel spark plug terminals. Complete EMI and RFI suppression. 550 degree double silicone construction. Copper and nickel alloy conductor. 150 Ohms or resistance.
Product Features:
See More
Product Features:
- Ferro-Spiral Core
- For Street/Strip Use
- OE-Type Spark Plug Boots
- Stainless Steel Spark Plug Terminals
- Complete EMI/RFI Suppression
- 550 Degree Double Silicone Construction
- Copper/Nickel Alloy Conductor
- 150 Ohms Resistance
DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-4009)
from
$43.49
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Carquest Premium – Distributor T48409: 100% New, With Cap and Rotor (Part No.T48409)
from
$277.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new unit with no core charges
- Precision machined shafts result in high speed accuracy and help prevent bearing failures
- Every distributor is tested to ensure reliable and long-lasting performance
- O-rings or gaskets included where applicable
- Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
- Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
- Original Equipment Equivalent high voltage ignition coils.
- 100% New Components and fasteners eliminate premature failures.
A1 Cardone – Ignition Distributor (Part No.F2000199446CAR)
from
$518.20
Based on over 40 years of making top-rated remanufactured products, we’ve seen where: and why:original parts fail. This unique, reverse-engineering expertise is the foundation of CARDONE Select Engineered (CSE) Technology. The CSE process identifies and corrects original design flaws, resulting in longer-lasting, reliable electronics parts.
Product Features:
See More
Product Features:
- CARDONE Select Engineered (CSE) Technology ensures that all distributors meet or exceed O.E. form, fit and function.
- The only NEW distributor in the aftermarket that is 100% computer tested for guaranteed, long-lasting performance.
- This distributor includes the cap and rotor to make installation a snap. Dust cover and gasket are also included on Honda applications.
- When CAM sizes are consolidated, the rotor number is placed on the unit to make service easy later on.
Original Equipment – Ignition Control Unit (Part No.F6000268404OEA)
from
$180.30
The Original Equipment Ignition Control Unit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
BERU Systems – Ignition Igniter (Part No.F2024303170BER)
from
$116.74
The ignition Igniter, also known as the switching unit, is used to regulate the current and dwell angle for transistor ignition systems using a hall sensor or inductive sensor. The module provides for reliable spark distribution in modern ignition systems with rotary high voltage distribution – a task that in older, conventional coil ignition systems was performed by the contact sets.
Product Features:
See More
Product Features:
- Well tried and tested OEM quality
- Connections and housing corrosion protected
- High thermal resistance and thus functional reliability
- Depending on the version, also with cooling plate or thermally conductive paste included
Carquest Premium – Ignition Module (Part No.CBE1083)
from
$109.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.
Product Features:
See More
Product Features:
- CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
- CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
- CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
Prestolite – Prestolite Ignition Wire Set (Part No.F102087333PST)
from
$74.26
The Prestolite carbon core wire set is resistant to fuels, oils and other under-hood chemicals and utilizes a stainless steel or zinc-plated steel for optimum strength, electrical conductivity, and corrosion resistance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- OE style connectors.
- Resistant to high temperatures, corrosion and vibration.
- Ignition noise suppressed. The Prestolite Ignition Wire Set features identical fit, function, color, and performance to OE.
NGK – Spark Plug Wire Set (Part No.8102)
from
$141.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
NGK – Spark Plug Wire Set (Part No.9634)
from
$55.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)
from
$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
DENSO – First Time Fit Ignition Wire Set (Part No.F1020689089ND)
from
$46.16
The Denso First Time Fit ignition wire sets are identical in form, fit, color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES specifications. The Denso 7 and 8mm ignition wires are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40F to 428 F and pass tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Carbon fiberglass core for superior conductivity.
- Fiberglass braiding for strength.
- Conductive silicone layer for EMI/RFI noise suppression.
- Silicone insulation for superior dielectric and heat performance.
- Reinforced Kevlar core.
NGK – Spark Plug Wire Set (Part No.8098)
from
$75.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Carquest Premium – Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit (Part No.35-4010)
from
$36.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK16PR-L11 (Part No.3395)
from
$15.49
Manufactured to the strictest OE performance, durability and emissions standards.
Product Features:
See More
Product Features:
- Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
- Platinum ground electrode for extended life
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Sustained spark performance over 100,000 miles
- Lasts up to three times as long as conventional plugs
- Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
- Iridium Long Life
- Enhanced Engine Performance: Enjoy more horsepower, faster and easier starts, and fewer misfires under heavy loads, thanks to the advanced design and materials used in the DENSO Iridium Long Life plug.
- Fuel Efficiency: This spark plug not only boosts engine performance but also helps in better conservation of fuel, making it an economical choice for long-term use.
DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IK20 (Part No.5304)
from
$11.79
Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).
Product Features:
See More
Product Features:
- World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
- Patented 360-degree laser welding assembly process
- U-groove and taper cut ground electrode to maximize flame propagation.
- Withstands temperatures greater than 4000° Fahrenheit
- Burnished nickel plating for high temperature endurance and superior corrosion resistance
- Wide range of part numbers for thousands of applications, including classic and collector cars
- Iridium Power
DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IW20TT (Part No.4709)
from
$10.99
Durability of an OE style plug combined with Power & Torque of high performance.
Product Features:
See More
Product Features:
- 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
- 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
- DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Durability of an OE style plug combined with Power & Torque of high performance.
- Withstands temperatures greater than 4000¦ Fahrenheit
- Iridium TT
Autolite – Racing Resistor Spark Plug: Enables Performance, Handles Intense Conditions (Part No.AR3923)
from
$4.99
The ground electrode is cut-back from the center electrode to provide a gap. The face of the ground electrode is concave to provide a constant gap to the center electrode. This plug is designed use in all aftermarket cylinder heads used in different types of racing venues including oval and road racing.
Product Features:
See More
Product Features:
- Opens spark face for better ignitability of flame kernel
- Retains less heat, transfers heat to shell faster – reduces risk of pre-ignition
- Dyno testing has shown proven power gains
- Cut-back ground electrode evolved from practice of grinding back the side electrode
Delphi – Ignition Coil (Part No.GN10170)
from
$70.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Delphi – Ignition Coil (Part No.F30001541575DEL)
from
$28.96
Ignition Coil
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBE1676)
from
$82.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1623)
from
$42.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Popular 1989 Eagle Summit Ignition and Tune-Up Products Categories
1989 Eagle Summit Ignition and Tune-Up Products
You count on your 1989 Eagle Summit to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 43 Ignition and Tune-Up Products ranging in price from $3.49 to $277.99, you’re sure to find everything you need for your 1989 Eagle Summit.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 15 different brands like NGK, Champion, and E3. 1989 Eagle Summit Ignition and Tune-Up Products start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 271 extensive product reviews on 1989 Eagle Summit Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration with 4.9 stars and Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RN14PMP5 with 4.9 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1989 Eagle Summit below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1989 Eagle Summit
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Eagle Summit running right for years to come. In our inventory you’ll find brands like NGK, Champion, E3, and even more.
Popular ACDelco Ignition and Tune-Up Products
You’ll find popular ACDelco brand products across Spark Plugs. All are waiting to get your 1989 Eagle Summit back on the road. Some of the top-rated ACDelco products in these categories are:
Top-Rated NGK Ignition and Tune-Up Products
If NGK are what you’re looking for, our inventory holds plenty. We stock NGK brand Ignition and Tune-Up Products for your 1989 Eagle Summit, and some of our most reviewed NGK parts include:
from
$4.99
(18)
OE Series Standard Nickel Spark Plug: Conventional Tip Design, BPR5ES-11
Spark Plugs
FAQs for 1989 Eagle Summit Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1989 Eagle Summit?
Out of 43 Ignition and Tune-Up Products for the 1989 Eagle Summit, the most popular in our inventory are:
from
$6.79
This product is not rated
RAPIDFIRE Premium Platinum Tip Copper Core Spark Plug: Reduces Misfires & Enhances Durability
Spark Plugs
What are the top-rated 1989 Eagle Summit Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1989 Eagle Summit based on customer reviews/ratings are:
from
$3.49
(12)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
“Replaced my old plug and generator fired right up. Excellent recommendation by the service desk. Thanks.”
from
$8.29
(8)
Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RN14PMP5
“There working good”
from
$4.79
(5)
OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, BPR6EY-11
“Purchased these plugs from Hinson’s Car Quest. They worked perfect. The staff was so much more friendly than other stores I go to. Will definitely be ”
