1989 Dodge B350 Drivetrains
More 1989 Dodge B350 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1989 Dodge B350, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1989 Dodge B350 Drivetrains
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – Forged Replacement Yoke For Dana 60, Stronger Than Billet, With A 1350 U/Joint Size (Part No.41029)
from
$266.99
Yukon forged replacement yoke for Dana 60, stronger than billet, with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1350 u-joint size
- 3.625″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)
from
$7.99
Dana 60 & Dana 70 Power Lok case bolt.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 60 and 70
- 7/16 x 14 thread
- 3.5″ long
- 9/16″ hex head
Yukon Gear – 9.25" Chrysler C/Clip (Part No.33075)
from
$17.99
9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.
Product Features:
See More
Product Features:
- c-clip for Chrysler 9.25″ rear
- 0.205″ thick
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)
Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)
Dorman – Rear Drive Shaft: Greaseable (Part No.976-858)
from
$921.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Yukon Gear – Dana 60 & Dana 61 Tracloc Clutch Set (Part No.16156)
from
$269.99
Dana 60 & Dana 61 TracLoc clutch set.
Product Features:
See More
Product Features:
- Clutch kit
- Fit Dana Spicer 60 Trac Loc positraction
Driveworks – Wheel Bearing (Part No.S-RP-1561-FO)
Yukon Gear – Differential (Part No.26037)
from
$941.99
Differential
USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 70 In A 3.73 Ratio (Part No.36088)
from
$392.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits Dana Spicer 70
- 10.50″ ring gear diameter
- 29 spline pinion
- 12 ring gear bolts
- 3.73 ratio
Yukon Gear – Pinion Install Kit For Dana 70-U Differential (Part No.13035)
from
$329.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 70U
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Set Up Bearing (Part No.56039)
from
$263.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 60
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Yukon Gear – Bearing Race Driver (Part No.56011)
from
$188.99
Bearing race driver for Dana 60 front, Dana 70U rear, Chrysler 8.75″ with 42 housing, and ’88 and older GM 14T. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM803110 race
- All steel construction
Yukon Gear – Bearing Install Kit For ’00 & Down Chrysler 9.25" Rear Differential (Part No.11011)
from
$285.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits 2000 and down Chrysler 9.25″ rear
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
USA Standard Gear – Pinion Installation Kit For Chrysler 9.25" Rear (Part No.60004)
from
$135.99
9.25″ Chrysler REAR PINION KIT .
Product Features:
See More
Product Features:
- Fits 2000 and down Chrysler 9.25″ rear
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
USA Standard Gear – Spartan Spring & Pin Kit, Fits Larger Designs (Part No.17010)
from
$26.99
Spartan spring & pin kit, fits larger designs.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60
- Replacement alignment pin and spring kit
National – Bearings (Part No.15245)
from
$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Tapered Roller Bearing (Part No.S-HM-803110)
Driveworks – Ball Bearing (Part No.S-HB-88107-A)
Yukon Gear – 20 Long Air Line For Zip Locker (Part No.34002)
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
Yukon Gear – Positraction Spiders For Chrysler9.25" Dura Grip Posi, 31 Spline, No Clutches Included (Part No.16180)
from
$389.99
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Chrysler 9.25″
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
- Fits Yukon Dura Grip
Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)
from
$5.99
Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 60
- Fits standard open and Trac Loc applications
Yukon Gear – Differential Carrier (Part No.20040)
from
$386.99
Differential Carrier
Popular 1989 Dodge B350 Drivetrains Categories
1989 Dodge B350 Drivetrains
You count on your 1989 Dodge B350 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 388 Drivetrains ranging in price from $1.99 to $1,487.99, you’re sure to find everything you need for your 1989 Dodge B350.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like National, DriveWorks, and Dorman. 1989 Dodge B350 Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,200 extensive product reviews on 1989 Dodge B350 Drivetrains. Some of the top-rated Drivetrains products we carry are Differential Cover Gasket with 4.7 stars and Bearings with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1989 Dodge B350 below to get started!
Top-Rated Drivetrains Brands For Your 1989 Dodge B350
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Dodge B350 running right for years to come. In our inventory you’ll find brands like National, DriveWorks, Dorman, and even more.
Popular MOOG Driveline Products Drivetrains
You’ll find popular MOOG Driveline Products brand products across Universal Joints. All are waiting to get your 1989 Dodge B350 back on the road. Some of the top-rated MOOG Driveline Products products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1989 Dodge B350, and some of our most reviewed National parts include:
FAQs for 1989 Dodge B350 Drivetrains
What are the most purchased Drivetrains for the 1989 Dodge B350?
Out of 388 Drivetrains for the 1989 Dodge B350, the most popular in our inventory are:
What are the top-rated 1989 Dodge B350 Drivetrains?
Top-rated Drivetrains for your 1989 Dodge B350 based on customer reviews/ratings are:
