1989 Chevrolet W6500 Tiltmaster Belts and Hoses

Find Your Specific 1989 Chevrolet W6500 Tiltmaster Belts and Hoses

Below you will find various in-demand Chevrolet Belts and Hoses, components and accessories for your 1989 W6500 Tiltmaster. Advance Auto Parts has popular W6500 Tiltmaster parts like Heater Hoses, Engine Cooling Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other W6500 Tiltmaster model years including 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996 and more. Select a category of 1989 Chevrolet W6500 Tiltmaster Belts and Hoses below and start saving instantly.

Essential Belts and Hoses for 1989 Chevrolet W6500 Tiltmasters

Gates – Premium Molded Coolant Hose (Part No.21942)

Premium Molded Coolant Hose

from

$17.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

Dayco – Flex Radiator Hoses; Neoprene, Heavy Duty, 12.25 Inch Long, 2 Inch Inner Dia. (Part No.82071GL)

Flex Radiator Hoses; Neoprene, Heavy Duty, 12.25 Inch Long, 2 Inch Inner Dia.

from

$27.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
See More
View Product

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26510)

Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose

from

$33.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 2" Diameter (Part No.C70689)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 2" Diameter

from

$16.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 2" Diameter (Part No.B70692)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 2" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 2" Diameter (Part No.B70212)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 2" Diameter

from

$22.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.50" Long, 1.25" Diameter (Part No.A70562)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.50" Long, 1.25" Diameter

from

$10.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR28423)

Green Stripe« Truck & Bus Series V-Belt

from

$43.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More
View Product

Dayco – V-Belt, Top Cog (Part No.17405)

V-Belt, Top Cog

from

$14.29
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

(2 reviews)
View Product

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22461)

Green Stripe« Truck & Bus Series V-Belt

from

$36.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More
View Product

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22485)

Green Stripe« Truck & Bus Series V-Belt

from

$34.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More
View Product

Dayco – Double Cog V-Belt; 45 Inch Long, Exact Fit Premium Quality (Part No.22450)

Double Cog V-Belt; 45 Inch Long, Exact Fit Premium Quality

from

$17.29
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More
View Product

Dayco – Double Cog V-Belt; 49 Inch Long, Exact Fit Premium Quality (Part No.22490)

Double Cog V-Belt; 49 Inch Long, Exact Fit Premium Quality

from

$20.29
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility – 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More
View Product

Dayco – Double Cog V-Belt; 47.5 Inch Long, Exact Fit Premium Quality (Part No.22475)

Double Cog V-Belt; 47.5 Inch Long, Exact Fit Premium Quality

from

$20.29
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility – 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More
View Product

Gates – Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter (Part No.26508)

Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter

from

$37.99
Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More
View Product

Dayco – Flex Radiator Hoses; Neoprene, Heavy Duty, 16.81 Inch Long, 2 Inch Inner Dia. (Part No.82091GL)

Flex Radiator Hoses; Neoprene, Heavy Duty, 16.81 Inch Long, 2 Inch Inner Dia.

from

$27.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
See More
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 2" Diameter (Part No.E71503)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 2" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.97" Diameter (Part No.B71674)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.97" Diameter

from

$14.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 2" Diameter (Part No.C70688)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 2" Diameter

from

$17.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Gates – Premium Molded Coolant Hose (Part No.21379)

Premium Molded Coolant Hose

from

$27.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

Gates – Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter (Part No.26509)

Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter

from

$37.99
Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More
View Product

Dayco – Flex Radiator Hoses; EPDM Rubber, 12.25 Inch Long, 2 Inch Inner Dia. (Part No.81411)

Flex Radiator Hoses; EPDM Rubber, 12.25 Inch Long, 2 Inch Inner Dia.

from

$24.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 2" Diameter (Part No.C71675)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 2" Diameter

from

$18.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Upgrade your 1989 Chevrolet W6500 Tiltmaster with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1989 Chevrolet W6500 Tiltmaster, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Belts and Hoses are key to keeping your W6500 Tiltmaster functioning at its best. At Advance Auto Parts, we offer a wide selection of 18 Belts and Hoses for the 1989 Chevrolet W6500 Tiltmaster, designed to meet your needs without breaking the bank. From Heater Hose replacements to Engine Cooling Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1989 Chevrolet W6500 Tiltmaster at great prices. Our Belts and Hoses inventory for this model ranges from just $10.99 to $43.99, with an average price of $28.12. Our 18 Belts and Hoses in stock come from 2 trusted brands, so you’re sure to find the right part for your 1989 Chevrolet W6500 Tiltmaster without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Fluids and Chemicals, Alternators and Starters and more to make sure your 1989 Chevrolet W6500 Tiltmaster is always ready to roll. We’re committed to providing you with everything you need to keep your W6500 Tiltmaster in top shape, all in one place. Start shopping confidently below for your 1989 Chevrolet W6500 Tiltmaster!

Best-Selling Heater Hoses for 1989 Chevrolet W6500 Tiltmasters

Enhance the driving experience in your Chevrolet with 1 quality Heater Hose components, starting at $10.99.
show more show less

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.50" Long, 1.25" Diameter (Part No.A70562)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.50" Long, 1.25" Diameter

from

$10.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Most Popular 1989 Chevrolet W6500 Tiltmaster Engine Cooling Hoses

Customize your Chevrolet with 8 Engine Cooling Hoses products like Upper Radiator Hoses and Lower Radiator Hoses, all priced under $37.99.
show more show less

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 2" Diameter (Part No.C70689)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 2" Diameter

from

$16.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 2" Diameter (Part No.E71503)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 2" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 2" Diameter (Part No.B70692)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 2" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

Dayco – Flex Radiator Hoses; Neoprene, Heavy Duty, 12.25 Inch Long, 2 Inch Inner Dia. (Part No.82071GL)

Flex Radiator Hoses; Neoprene, Heavy Duty, 12.25 Inch Long, 2 Inch Inner Dia.

from

$27.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
See More
View Product

Gates – Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter (Part No.26508)

Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter

from

$37.99
Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More
View Product

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26510)

Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose

from

$33.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More
View Product

Gates – Premium Molded Coolant Hose (Part No.21379)

Premium Molded Coolant Hose

from

$27.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

Dayco – Flex Radiator Hoses; Neoprene, Heavy Duty, 16.81 Inch Long, 2 Inch Inner Dia. (Part No.82091GL)

Flex Radiator Hoses; Neoprene, Heavy Duty, 16.81 Inch Long, 2 Inch Inner Dia.

from

$27.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
See More
View Product

Top Picks for 1989 Chevrolet W6500 Tiltmaster Serpentine and V Belts

Upgrade Chevrolet W6500 Tiltmasters with top-quality Serpentine and V Belts parts, including 7 OEM and aftermarket selections for your 1989 model.
show more show less

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22495)

Green Stripe« Truck & Bus Series V-Belt

from

$40.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More
View Product

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22485)

Green Stripe« Truck & Bus Series V-Belt

from

$34.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More
View Product

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR28423)

Green Stripe« Truck & Bus Series V-Belt

from

$43.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More
View Product

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22474)

Green Stripe« Truck & Bus Series V-Belt

from

$38.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More
View Product

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22416)

Green Stripe« Truck & Bus Series V-Belt

from

$32.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More
View Product

Dayco – Double Cog V-Belt; 49 Inch Long, Exact Fit Premium Quality (Part No.22490)

Double Cog V-Belt; 49 Inch Long, Exact Fit Premium Quality

from

$20.29
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility – 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More
View Product

Dayco – Double Cog V-Belt; 49.5 Inch Long, Exact Fit Premium Quality (Part No.22495)

Double Cog V-Belt; 49.5 Inch Long, Exact Fit Premium Quality

from

$16.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility – 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More
View Product

In-Demand Radiator Hoses for 1989 Chevrolet W6500 Tiltmasters

Select from 2 premium Radiator Hoses parts for your 1989 Chevrolet W6500 Tiltmaster, with prices ranging from $17.99 to $37.99.
show more show less

Gates – Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter (Part No.26509)

Molded Heater Hose: EPDM, Steel, Direct Fit, 2" Inside Diameter

from

$37.99
Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More
View Product

Gates – Premium Molded Coolant Hose (Part No.21942)

Premium Molded Coolant Hose

from

$17.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

FAQs for 1989 Chevrolet W6500 Tiltmaster Belts and Hoses

Which Belts and Hoses are best-sellers for 1989 Chevrolet W6500 Tiltmasters?

Out of 18 Belts and Hoses that fit 1989 Chevrolet W6500 Tiltmasters, the following parts are the top sellers:

What’s the price range for 1989 Chevrolet W6500 Tiltmaster Belts and Hoses?

Belts and Hose prices for the 1989 Chevrolet W6500 Tiltmaster start at $10.99 and go up to $43.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1989 Chevrolet W6500 Tiltmaster?

The average price for Belts and Hoses for the 1989 Chevrolet W6500 Tiltmaster is $28.12. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Chevrolet W6500 Tiltmaster model years?

Yes, we currently carry Belts and Hoses for 9 model years of Chevrolet W6500 Tiltmasters between 1987 and 1996. Belts and Hoses are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1988, and 1987.

What are the cheapest Belts and Hoses for my 1989 Chevrolet W6500 Tiltmaster?

The cheapest 1989 Chevrolet W6500 Tiltmaster Belts and Hoses we carry in stock are:

What types of Belts and Hoses do you sell for my 1989 Chevrolet W6500 Tiltmaster?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1989 Chevrolet W6500 Tiltmaster:

Can I get help with 1989 Chevrolet W6500 Tiltmaster Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Belts and Hoses and more.

What is your return policy for Chevrolet W6500 Tiltmaster Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Chevrolet W6500 Tiltmaster Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

More Popular Parts for All Makes