1989 Chevrolet R2500 Performance Engines

More 1989 Chevrolet R2500 Performance Engines

Find your specific 1989 Chevrolet R2500 original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1989 Chevrolet R2500 Performance Engines

Mr. Gasket – Ultra Seal; Sure-Lock Rocker Arm Nuts (Part No.920G)

Ultra Seal; Sure-Lock Rocker Arm Nuts

from

$59.99
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:
  • They are zinc dichromate plated steel
  • They have black oxide coated set screws
  • Keeps rocker arms positively locked
See More
View Product

Spectre – In Gasket Comp Sb Chev S (Part No.400)

In Gasket Comp Sb Chev S

from

$34.49
The K&N PreCharger® filter wrap is specially designed to extend the service interval of your K&N Filtercharger filter when used in very dusty conditions. They are made from durable polyester material containing a uniform weave. The PreCharger will stop small dirt particles with minimal restriction to the airflow of the filter.

Product Features:
  • Cellulose nitrile composition
  • Silicone beading on both sides
  • Create a leak proof seal
  • Double beaded, includes EGR restrictor plate
See More
View Product

Weiand – Team G; Water Pump Spacer Kit (Part No.8207)

Team G; Water Pump Spacer Kit

from

$112.99
Use with a short water pump to convert to a long water pump.

Product Features:
  • Water Pump Spacer Kit
See More
View Product

Edelbrock – Pushrod Set for S/B Chevy (Part No.9653)

Pushrod Set for S/B Chevy

from

$191.99
Edelbrock part #9653 Pushrods are designed for Chevy 348/409 “W” series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precis

Product Features:
  • 7.2 in. Length
  • 0.312 in. Diameter
  • 4130 Chromoly Steel Material
  • Black Oxide Finish
  • Made In The USA
See More
View Product

Weiand – Supercharger Remote Thermostat Housing (Part No.7134P)

Supercharger Remote Thermostat Housing

from

$164.99


Product Features:
  • Remote Thermostat Housing
See More
View Product

Mr. Gasket – Special Cam Bolt (Part No.944G)

Special Cam Bolt

from

$12.99
Grade 8, single bolt. Black plated finish. The washers are designed to secure the Mr. Gasket cam button pn1180, pn1181, and pn1183 or can be used as stock replacements.

Product Features:
  • Specialty and drive train fastener
  • Special cam bolts
  • Black plated finish
See More
View Product

Mr. Gasket – Intake Manifold Bolts (Part No.957G)

Intake Manifold Bolts

from

$21.99
Choose from grade 5 hex or socket head intake bolts or grade 8 bolts with twelve point smaller-than-standard head and flange, ideal for where space is minimal. Bolts and washers are bright zinc plated for protection and appearance.

Product Features:
  • Grade 8 material
  • Extra thick flat washers
  • Ideal for minimal space
  • 12-pt head and flange
  • Zinc plated for protection
See More
View Product

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

Engine Crankshaft Seal Kit

from

$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Mr. Gasket – Ultra Seal; Valve Cover Gasket Set (Part No.5862)

Ultra Seal; Valve Cover Gasket Set

from

$30.99
Creates a positive seal. Controlled swelling gasket. Thickness will not decrease. Eliminates re-torque of valves. High-tensile strength. Handles ex flange pressure and forms a leak proof seal. Black latex coating.

Product Features:
  • Creates a positive seal
  • Controlled swelling gasket
  • Thickness will not decrease
  • Eliminates re-torque of valves
  • High-tensile strength
  • Handles ex flange pressure
  • Forms leak proof seal
  • Black latex coating
See More
View Product

Mr. Gasket – Precision Timing Tape (Part No.1588)

Precision Timing Tape

from

$18.99
Avoid trouble with this precision timing tape. Use it for accurate timing, setting valve lash or when degreeing the harmonic balancer.

Product Features:
  • Accurate in calibration
  • For hi-performance engines
  • Increased performance
  • Set valve lash at proper time
See More
View Product

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More
View Product

Mr. Gasket – Water Outlet Gasket (Part No.738G)

Water Outlet Gasket

from

$30.99
Manufactured from a blend of nitrile rubber and fiber for excellent sealing and durability. Precision die cut for application.

Product Features:
  • Edge molded rubber water outlet gasket is reusable
  • Requires no gasket sealer
  • Solid aluminum carrier for strength/rigidity
See More

(6 reviews)
View Product

Edelbrock – Hex-A-Just By Cloyes Adj. True-Roller Timing Chain Set (Part No.7332)

Hex-A-Just By Cloyes Adj. True-Roller Timing Chain Set

from

$123.99


Product Features:
  • Dial-In Your Camshaft With Ease
  • Made From Induction Hardened Billet Steel
  • Solid Bushing Chain Resists Stretching
  • Billet SAE-1144 Steel Crank Sprockets
  • Multiple Keyways
See More
View Product

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1884 R)

PERFORMANCE OIL PAN GASKET SET

from

$64.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)

Sure Seat Valve Springs for Chevy 262-400 V8 1957-95

from

$60.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

(2 reviews)
View Product

Edelbrock – Sure Seat; Valve Spring (Part No.5902)

Sure Seat; Valve Spring

from

$51.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

(1 reviews)
View Product

Holley – OEM Repl Thottle Bodies (Part No.502-6)

OEM Repl Thottle Bodies

from

$850.99
Holley designed these throttle bodies with all relevant emission provisions and hook-ups for a true 50 state legal installation. They are engineered for a bolt-on installation on stock factory Manifolds for the applications cataloged. The one barrel throttle bodies have been assigned California Air Resources Board (C.A.R.B.) Executive Order (E.O.) number D-115-4. The two barrel throttle replacement bodies are considered to be the functional equivalent of the original equipment throttle body and, as such, are considered to be 50-State legal.

Product Features:
  • Direct Replacement For OE Units
  • 2 in. Throttle Bore
  • 42 percent Area Increase Over Stock TBI
  • Including Air Distribution Ring
  • Increased Torque and Horsepower
  • 50 State Legal
See More
View Product

Edelbrock – Performer; Cylinder Head (Part No.60469)

Performer; Cylinder Head

from

$569.99


Product Features:
  • Out-of-the-Box Bolt-On Performance
  • Designed For Street/High Performance Big Blocks
  • Specially Designed Oval Ports
  • Increased Flow And Velocity
  • Highly Efficient Semi-Open Style Chamber
  • High Velocity Short Intake Ports
  • Fit GM Mark IV; Gen V; and Gen VI Blocks
  • Bare Head Only; Use PN[60479] for Complete
See More
View Product

Holley – EFI Intake Manifold (Part No.9901-204)

EFI Intake Manifold

from

$637.99
Utilizes late model alternator and A/C bracket mounting provisions. Has vacuum taps off Manifold runners. Uses cable bracket P/N 20-101 for GM 700R4 transmission. Extra installation hardware included.

Product Features:
  • Machined For Standard Deck Blocks
  • 3000-6500 RPM Power Band
  • Designed For Port Fuel Injection systems
  • Accepts 2000 CFM Holley 4-bbl Throttle. Body
  • Single Plane Manifold
See More
View Product

Edelbrock – Side-Mount Throttle Linkage for S/B Chevy #7110 Street Tunnel Ram Manifold (Part No.7071)

Side-Mount Throttle Linkage for S/B Chevy #7110 Street Tunnel Ram Manifold

from

$213.99
Throttle linkage kit for street tunnel ram. Use for sideways mounted carburetors only. Use Holley PN(0-9776) for sideways mounted applications. Not legal for sale or use on pollution controlled motor vehicles.

Product Features:
  • Throttle Linkage Kit for Street Tunnel Ram
  • Use for Sideways Mounted Carburetors Only
  • Use Holley PN[0-9776] For Sideways Mount Apps
See More
View Product

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$563.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More
View Product

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Torque Converter, Holeshot 3000

from

$717.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More
View Product

Mr. Gasket – TIMING COVER SEAL (Part No.17)

TIMING COVER SEAL

from

$25.99
TIMING COVER SEAL
View Product

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Engine Timing Cover Gasket

from

$20.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Steel core gasket construction
  • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Mr. Gasket – Timing Cover Seal (Part No.18)

Timing Cover Seal

from

$16.99
Mr. Gasket manufactures a variety of performance parts and accessories, including carburetor and fuel accessories, cooling system accessories, engine components, fasteners, gaskets, and suspension and drive line components. Besides gaskets and fasteners, the Mr. Gasket brand provides a variety of performance and racing products for all parts of your vehicle including: carburetor and fuel accessories, chrome-plated accessories, cooling system accessories, engine components, ignition and electrical accessories, shifter accessories, specialty tools and suspension and driveline components. Mr .Gasket also includes Ultra-Seal gaskets and fasteners.

Product Features:
  • Nitrile rubber and high density cork
  • Will not shrink or stick
See More
View Product

Spectre – Throttle Body Injection Spacer (Part No.11252)

Throttle Body Injection Spacer

from

$94.99
Manufactured from high quality machine finished aluminum, Spectre’s Throttle Body Spacers are engineered to improve engine performance. By providing added volume to the intake manifold and directing air through a tapered internal constriction, this spacer utilizes the Venturi effect to increase the speed of air flowing into your intake manifold. Spectre has designed a number of kits to fit a wide range of specific applications. Each kit includes the necessary gaskets and hardware to bolt directly to the factory components, making installation quick and easy.

Product Features:
  • Includes the necessary gaskets and hardware to bolt directly to the factory components
  • Each kit is designed for the applications listed
  • Manufactured from high quality machine finished aluminum
  • Can be installed in less than an hour using common hand tools with no drilling or cutting required
  • Simple to install
See More

(2 reviews)
View Product

Popular 1989 Chevrolet R2500 Performance Engines Categories

Performance Intake Manifolds
Performance Intake Manifolds
Performance Throttle Body Spacers
Performance Throttle Body Spacers
Performance Water Outlet Gaskets
Performance Water Outlet Gaskets
Performance Throttle Bodies
Performance Throttle Bodies
Performance Engine Water Pumps
Performance Engine Water Pumps
Performance Water Outlets
Performance Water Outlets
Performance Engine Cylinder Head Gaskets
Performance Engine Cylinder Head Gaskets
Performance Engine Harmonic Balancers
Performance Engine Harmonic Balancers
Performance Engine Intake Manifold Gaskets
Performance Engine Intake Manifold Gaskets
Performance Engine Timing Sets and Components
Performance Engine Timing Sets and Components
Performance Engine Valve Springs
Performance Engine Valve Springs
Performance Engine Valve Cover Gasket Sets
Performance Engine Valve Cover Gasket Sets
Performance Engine Rocker Arms
Performance Engine Rocker Arms
Performance Engine Oil Pan Gaskets
Performance Engine Oil Pan Gaskets
Performance Intake Manifold Hardware
Performance Intake Manifold Hardware
Performance Engine Main Bearing Gasket Sets
Performance Engine Main Bearing Gasket Sets
Performance Engine Timing Cover Gasket Sets
Performance Engine Timing Cover Gasket Sets
Performance Engine Push Rods
Performance Engine Push Rods
Performance Engine Cylinder Heads
Performance Engine Cylinder Heads
Performance Torque Converters
Performance Torque Converters
Performance Engine Camshaft Bolts
Performance Engine Camshaft Bolts

1989 Chevrolet R2500 Performance Engines

Maybe you’re in the middle of a full rebuild of that 1989 Chevrolet R2500. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 93 different Performance Engines in our inventory ranging from $12.99 to $1,259.99. That means you can find the exact parts or products you need to keep that 1989 Chevrolet R2500 running smoothly.

Performance Engines are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Chevrolet R2500. FEL-PRO Performance, Mr. Gasket, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1989 Chevrolet R2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 28 reviews in this category, some of the top rated parts include Action Plus Water Pumps with 3.7 stars and Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 with 5.0 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1989 Chevrolet R2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1989 Chevrolet R2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Chevrolet R2500 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your R2500 the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Spectre Performance Engines

We carry Spectre parts in our stock across Performance Throttle Body Spacers and Performance Engine Valve Cover Gasket Sets categories, plus more. For a 1989 Chevrolet R2500, our most popular Spectre Performance Engines include:
Throttle Body Injection Spacer
from $94.99
(2)
Throttle Body Injection Spacer
Performance Throttle Body Spacers
Valve Cover Gasket Steel/Rubber Bbc
from $31.99
(1)
Valve Cover Gasket Steel/Rubber Bbc
Performance Engine Valve Cover Gasket Sets

Top 1989 Chevrolet R2500 Performance Engines from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1989 Chevrolet R2500. Popular Mr. Gasket parts include:
Water Outlet Gasket
from $30.99
(6)
Water Outlet Gasket
Performance Water Outlet Gaskets
Intake Manifold Bolts
from $29.99
(5)
Intake Manifold Bolts
Performance Intake Manifolds
Ultra Seal; Valve Cover Gasket Set
from $40.99
(1)
Ultra Seal; Valve Cover Gasket Set
Performance Engine Valve Cover Gasket Sets

FAQs for 1989 Chevrolet R2500 Performance Engines

What are the most purchased Performance Engines for the 1989 Chevrolet R2500?

Out of 93 Performance Engines for the 1989 Chevrolet R2500, the most popular in our inventory are:
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
from $39.49
(1)
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Lower Intake Manifold Gasket Set: 9 Piece Set
from $27.49
This product is not rated
Lower Intake Manifold Gasket Set: 9 Piece Set
Performance Engine Intake Manifold Gaskets
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $52.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets

What are the top-rated 1989 Chevrolet R2500 Performance Engines?

Top-rated Performance Engines for your 1989 Chevrolet R2500 based on customer reviews/ratings are:
Action Plus Water Pumps
from $215.99
(3)
Action Plus Water Pumps
“I bought this item for my 1979 Camaro SBC for Street/Strip application. Water pump weighs 4 LBS less than factory, comes with its own cork gaskets. N”
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
from $60.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $62.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
“Have not had a chance to install, but have used FelPro in the past with good results.”

More Popular Parts for All Makes