from

$14.79

Product Features:

Brand may vary by location

from

$27.99

ATP Flywheel Shim

from

$29.99

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Manufactured to meet or exceed original equipment specs
Eliminates grinding from damaged teeth
Increases starter drive life

from

$45.99

Engineered from high-quality materials to ensure chemical and thermal resistance, our Clutch Hydraulic Hose restores and maintains optimal clutch performance.

Product Features:

Direct replacement for a proper fit every time
Integral brackets included for ease of installation (where applicable)
Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met
Brand may vary by location

from

$24.29

GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Support the end of the transmission input shaft while the clutch is disengaged
Allows for smooth changing of gears
Helps keep transmission input shaft properly aligned
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$221.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$192.03

As an OE clutch, clutch system and component supplier, Sachs products are developed to meet the highest demands of the worlds’s leading car manufacturers. With a complete program to satisfy a one-stop-shop need for complete clutch system replacement parts, unsurpassed quality and unmatched Asian, Domestic and European coverage, SACHS brand confirms itself as the premier OE clutch product available to the aftermarket. In order to reduce installation time, SACHS Super Set Clutch Kits come with everything needed for installations. All kits included in the catalog have also been tested to meet or exceed OE specifications and cycle tested in order to reduce returns.

Product Features:

OE Quality and direct fit application.
Original Equipment Supplier
Clutch kit contains; disc, pressure plate, release bearing and pilot bearing when required.
Most complete clutch kit line offering in the industry
Unmatched Asian, Domestic and European coverage
Exclusive parts not available through other suppliers
Complete range of complimentary parts and upgrades

from

$12.99

AT CLUTCH PLATE

from

$32.99

CLUTCH FORK

from

$39.99

LuK OE Quality Replacement Release Fork

from

$39.91

The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:

Extended service life
Compact, lightweight design
Sealed for life with high performance, application-specific grease
Simplified assembly
Integrated functionality
Design flexibility

from

$3.99

This clutch flywheel bolt is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Thread Size: 7/16-20
Tread Length: 0.900 in.
SAE
PLEASE NOTE: Item priced and sold by each. See store for details.

from

$10.49

This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$27.49

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$34.99

The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:

High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 Psi
Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
Large Diameter, Low Profile Design
Complete With Washers
200,000 PSI
1″ Underhead Length
3/8″-16 Thread Size

from

$9.99

CLUTCH FORK

from

$43.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$8.99

CLUTCH FORK

from

$229.99

Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit and function just like the original part to ensure durability and long life.

Product Features:

Manufactured to meet or exceed original equipment specs
No resurfacing required
Improves performance

from

$499.99

Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:

Certified Billet Material
Borg and Beck Clutch Pattern
Long-Style Clutch Pattern
Ring Gear Securely Mounted To Prevent Spinning

from

$117.99

Power Train

from

$181.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1986 to 1994 GM (externally balanced) 4.3L V6 and GM small block V8 engines with one piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$75.99

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$5.99

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience