1989 Chevrolet Corvette Performance and Racing Products

Essential 1989 Chevrolet Corvette Performance and Racing Products

Spectre – Sbc Fuel Mint Plate W/Bolts (Part No.42493)

Sbc Fuel Mint Plate W/Bolts

from

$12.99
This Spectre Fuel Pump Mounting Plate for short block Chevrolet engines comes with a gasket, four bolts and four washers. It is used to mount mechanical fuel pumps. It is also triple chrome plated.

Product Features:
  • Small block Chevrolet, use for mounting mechanical fuel pumps
  • Includes mounting plate gasket
  • Includes chrome mounting bolts with washers
  • Triple chrome plated
See More

Spectre – Water Neck; Chevy 90 Degree (Part No.4933)

Water Neck; Chevy 90 Degree

from

$50.99
Spectre’s Chevrolet water neck fits Chevy V8 engines and features a 90 degree neck with a 360 degree swivel design for a custom look and fit. This water neck has been designed around the OEM specifications, has a height of 2-7/8 inches and has a polished aluminum finish for a lasting look that fits great. This water neck includes the allen bolts and sealing O-ring.

Product Features:
  • Fits Chevy V8 engines
  • 90 degree neck with a 360 degree swivel design
  • 2-7/8 inch height
  • Includes sealing O-ring and allen bolts
  • Polished aluminum finish
  • Easy to install
See More

Hypertech – Street Runner Power Computer Chip, with Overdrive (Part No.157321)

Street Runner Power Computer Chip, with Overdrive

from

$242.89
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.

Product Features:
  • Designed For Daily Street Driving
  • For Unmodified Vehicles w/Stock Thermostat
  • Controls Engines Air/Fuel Ratio
  • Controls Spark Advance For Max Power
  • Potential Gas Mileage Improvements
  • No Wiring Or Soldering Required
  • Installs In Less Than 30 Minutes
See More

Mr. Gasket – Precision Timing Tape (Part No.1591)

Precision Timing Tape

from

$15.99
Avoid trouble with this precision timing tape. Use it for accurate timing, setting valve lash or when degreeing the harmonic balancer.

Product Features:
  • Accurate in calibration
  • For hi-performance engines
  • Increased performance
  • Set valve lash at proper time
See More

Mr. Gasket – Water Outlet Gasket (Part No.738G)

Water Outlet Gasket

from

$30.99
Manufactured from a blend of nitrile rubber and fiber for excellent sealing and durability. Precision die cut for application.

Product Features:
  • Edge molded rubber water outlet gasket is reusable
  • Requires no gasket sealer
  • Solid aluminum carrier for strength/rigidity
See More

Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)

Sure Seat Valve Springs for Chevy 262-400 V8 1957-95

from

$60.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

Super Intake Manifold Bolts

from

$26.99
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

Product Features:
  • Assures Accurate Torque App
  • Prevents Galling Manifold
  • Grade 5 Material
  • Black Oxide Coasted
See More

Hays – Performance; Flywheel (Part No.10-140)

Performance; Flywheel

from

$374.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:
  • Certified Billet Material
  • Borg and Beck Clutch Pattern
  • Long-Style Clutch Pattern
  • Ring Gear Securely Mounted To Prevent Spinning
See More

MagnaFlow – Direct Fit Catalytic Converter, Off Road Use Only, Stainless Steel (Part No.93987)

Direct Fit Catalytic Converter, Off Road Use Only, Stainless Steel

from

$329.99
Product Features:
  • Product might not be available in all states due to local laws.
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1818)

PERFORMANCE OIL PAN GASKET SET

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Timing Tab (Part No.4600)

Timing Tab

from

$9.99
These chromed timing tab finish your engine’s a completely customized look.

Product Features:
  • Timing tabs
  • Chrome plated; skin packaged
  • Balancer
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2002)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470S)

Thermocap Radiator Cap

from

$54.99
Knowing your coolant temperature can help to prevent burn injuries. Thermo Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermo Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Check the Thermo Cap temperature indicator to determine if the coolant is cool enough to make removing Thermo Cap safe. If the coolant is very hot, then thoroughly rinse the radiator with cool water, until the coolant temperature drops into a cooler safe zone Thermo Cap’s integrated coolant reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree Fahrenheit temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges. Chromed crown with a colored trim ring. Indicates coolant temperature, Helps to prevent coolant injuries, integrated coolant reclamation valve, Improves under hood appearance, Fits most domestic or import vehicles and various valve pressures available.

Product Features:
  • Indicates coolant temperature
  • Helps to prevent coolant injuries
  • Integrated coolant reclamation valve
  • Improves under hood appearance
  • Fits most domestic vehicles
  • Built in calibrated thermometer
See More

Edelbrock – Performer; Cylinder Head (Part No.61919)

Performer; Cylinder Head

from

$598.99


Product Features:
  • Out-of-the-Box Bolt-On Performance
  • 54cc Combustion Chamber Improves Performance
  • Accept Stock Self-Aligning Roller Rocker Arms
  • Accept Aftermarket SelfAligning Roller Rocker Arms
See More

FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2904)

PERFORMANCE REAR MAIN SEAL SET

from

$16.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Accel – Spark Plug Wire (Part No.8842)

Spark Plug Wire

from

$115.99
Spark Plug Wire

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$52.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

Energy Suspension – Strut Rod Bushing Set (Part No.3.7101R)

Strut Rod Bushing Set

from

$51.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Hypertech – ThermoMaster Power Computer Chip, Cast Iron Head (Part No.156372)

ThermoMaster Power Computer Chip, Cast Iron Head

from

$252.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:
  • Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
  • Controls Engines Air/Fuel Ratio
  • Controls Spark Advance For Max Power
  • Potential Gas Mileage Improvements
  • No Wiring Or Soldering Required
  • Installs In Less Than 30 Minutes
See More

Accel – Points Eliminator Kit (Part No.2010)

Points Eliminator Kit

from

$98.99
Put an end to high maintenance points ignition systems by installing an ACCEL points eliminator ignition conversion kit. By utilizing specialized electronic circuitry and an infrared signal, ignition timing is stable from 1 to 10,000 RPM. More accurate ignition timing than any other type of system. Improves performance and fuel efficiency. Easy to install with simple hand tools. Reduced maintenance-eliminates changing points forever. Latest thermal clad based surface mount construction for maximum dependability and long life. Available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • More Accurate Ignition Timing
  • Improves Performance And Fuel Economy
  • Provides More Accurate Ignition Timing
  • Easy To Install w/Hand Tools
  • Reduced Maintenance
  • Thermal Clad Based Surface Mount Construction
  • Utilizes Specialized Electronic Circuitry
  • Ignition Timing Is Stable From 1 To 10000rpm
See More

Hooker Headers – Street Force; Emissions Compatible Header (Part No.2061HKR)

Street Force; Emissions Compatible Header

from

$662.99
Hooker Street Force Headers are designed to be a high performance alternative to the stock O.E. manifolds. These headers are built to accommodate all emission control devices. Please check your application in this section for more information regarding emissions legality.

Product Features:
  • Long Tube Lengths
  • Long Transition Collectors
  • Monstrous Low-Mid Range Torque
  • Keep Top End Horsepower
  • Provides Finest Fit
  • Most Durable Design Available
See More

Energy Suspension – Sway Bar Bushing Set (Part No.3.5197R)

Sway Bar Bushing Set

from

$18.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Energy Suspension – Hyper-Flex System (Part No.3.18123R)

Hyper-Flex System

from

$373.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

D4061 Flame-Thrower HEI Distributor Rotor Red

from

$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4061 Flame-Thrower HEI Distributor Rotor Red
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$36.99
Brake Bleeder Screws

Mr. Gasket – Aluminum Valve Cover (Part No.6854)

Aluminum Valve Cover

from

$159.99
Mr. Gasket’s aluminum valve covers are precision die cast for light weight and a perfect fit. Beautifully polished to a high luster, they are sure to enhance the appearance of any engine compartment. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. Available with plain or ball- milled tops and include a 1 1/4 inch diameter breather hole, except where noted. Packaged two per set.

Product Features:
  • 0.125 in. Thick
  • Lightweight
  • Precision Die Cast
  • Extended Sealing Lip
  • Stops Gasket From Moving
  • A Perfect Fit
  • Beautifully Polished To A High Luster
See More

B & M – Tork Master 2000 (Part No.20400)

Tork Master 2000

from

$266.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

Mr. Gasket – Special Cam Bolt (Part No.944G)

Special Cam Bolt

from

$12.99
Grade 8, single bolt. Black plated finish. The washers are designed to secure the Mr. Gasket cam button pn1180, pn1181, and pn1183 or can be used as stock replacements.

Product Features:
  • Specialty and drive train fastener
  • Special cam bolts
  • Black plated finish
See More

Popular 1989 Chevrolet Corvette Performance and Racing Products Categories

1989 Chevrolet Corvette Performance and Racing Products

You count on your 1989 Chevrolet Corvette to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 141 Performance and Racing Products ranging in price from $5.99 to $1,070.00, you’re sure to find everything you need for your 1989 Chevrolet Corvette.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 20 different brands like Mr. Gasket, K&N, and FEL-PRO Performance. 1989 Chevrolet Corvette Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 114 extensive product reviews on 1989 Chevrolet Corvette Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Intake Manifold Bolts with 4.6 stars and Wire Set; Super Conductor; Small Block Chevy with HEI Cap with 3.8 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1989 Chevrolet Corvette below to get started!

Top-Rated Performance and Racing Products Brands For Your 1989 Chevrolet Corvette

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Chevrolet Corvette running right for years to come. In our inventory you’ll find brands like Mr. Gasket, K&N, FEL-PRO Performance, and even more.

Popular FEL-PRO Performance Performance and Racing Products

You’ll find popular FEL-PRO Performance brand products across Performance Engines. All are waiting to get your 1989 Chevrolet Corvette back on the road. Some of the top-rated FEL-PRO Performance products in these categories are:
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $52.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
from $39.49
(1)
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Exhaust Manifold Gasket Set
from $31.49
(2)
Exhaust Manifold Gasket Set
Performance Exhaust Manifold Gaskets

FAQs for 1989 Chevrolet Corvette Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1989 Chevrolet Corvette?

Out of 141 Performance and Racing Products for the 1989 Chevrolet Corvette, the most popular in our inventory are:
Exhaust Gasket Set
from $19.99
(14)
Exhaust Gasket Set
Performance Exhaust Manifold Gaskets
Water Outlet Gasket
from $30.99
(6)
Water Outlet Gasket
Performance Water Outlet Gaskets
Aluminum Exhaust Gasket
from $40.99
(4)
Aluminum Exhaust Gasket
Performance Exhaust Manifold Gaskets

What are the top-rated 1989 Chevrolet Corvette Performance and Racing Products?

Top-rated Performance and Racing Products for your 1989 Chevrolet Corvette based on customer reviews/ratings are:
Intake Manifold Bolts
from $29.99
(5)
Intake Manifold Bolts
“Excellent product.”
Wire Set; Super Conductor; Small Block Chevy with HEI Cap
from $133.99
(5)
Wire Set; Super Conductor; Small Block Chevy with HEI Cap
“very good insulation but bigger boot not good for tight clearance from headers”
Exhaust Gasket Set
from $25.99
(4)
Exhaust Gasket Set
“Perfect fit”