1989 Chevrolet Corvette Clutch Systems

Essential Clutch Systems for 1989 Chevrolet Corvettes

Lakewood – Power Train (Part No.RM-931)

Power Train

from

$117.99
Power Train

ATP – Automatic Transmission Flex Plate (Part No.Z-121)

Automatic Transmission Flex Plate

from

$63.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

Lakewood – Power Train (Part No.RM-902)

Power Train

from

$193.99
Power Train

GM Genuine Parts – Manual Transmission Clutch Pilot Bearing (Part No.CT1082)

Manual Transmission Clutch Pilot Bearing

from

$20.29
GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Support the end of the transmission input shaft while the clutch is disengaged
  • Allows for smooth changing of gears
  • Helps keep transmission input shaft properly aligned
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Clutch Pilot Bearing/ Bushing (Part No.690-057)

Clutch Pilot Bearing/ Bushing

from

$28.49
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

GM Genuine Parts – Manual Transmission Clutch Pilot Bearing (Part No.CT1078)

Manual Transmission Clutch Pilot Bearing

from

$24.29
GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Support the end of the transmission input shaft while the clutch is disengaged
  • Allows for smooth changing of gears
  • Helps keep transmission input shaft properly aligned
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ATP – FLYWHEEL SHIM (Part No.GS-10)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

ATP – ATP Flywheel Shim (Part No.GS-8)

ATP Flywheel Shim

from

$27.99
ATP Flywheel Shim

ATP – FLYWHEEL SHIM (Part No.GS-4)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

Dorman – Flywheel Bolt (Part No.I1005831588DOR)

Flywheel Bolt

from

$16.66
Flywheel Bolt

ATP – M/T FLYWHEEL BOLT (Part No.ZX-2196)

M/T FLYWHEEL BOLT

from

$18.99
M/T FLYWHEEL BOLT

ARP Auto Racing – ARP Flywheel Bolt Kit (Part No.200-2802)

ARP Flywheel Bolt Kit

from

$24.99
ARP offers two styles of Flywheel bolts: premium grade Pro Series, with a 200,000 psi rating and High Performance, with a 180,000 psi rating. They are both heat-treated prior to thread rolling and machining, feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength and improved flywheel register. Kits include washers and nuts where applicable.

Product Features:
  • 3/4″ 12-Point Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • 7/16″-20 RH Thread Size
  • Set of 6
  • Chevy 90° V6 & 265-454 With 2-pc Rear Seal, Ford 289-460
  • 1″ Underhead Length
See More

ARP Auto Racing – 10 Millimeter X 1.50 Thread Size, 180000 Psi Tensile Strength, Hex Style Head (Part No.134-2201)

10 Millimeter X 1.50 Thread Size, 180000 Psi Tensile Strength, Hex Style Head

from

$23.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:
  • High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
  • Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
  • Large Diameter, Low Profile Design
  • Complete With Washers
  • Sold As A Kit
  • 180,000 PSI
See More

ARP Auto Racing – 3/8" – 16 Thread Size, 180000 Psi Tensile Strength, Hex Style Head Type (Part No.130-2201)

3/8" - 16 Thread Size, 180000 Psi Tensile Strength, Hex Style Head Type

from

$20.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:
  • High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
  • Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
  • Large Diameter, Low Profile Design
  • Complete With Washers
  • Sold As A Kit
  • 180,000 PSI
See More

LUK – Clutch Master Cylinder (Part No.I3000836073LUK)

Clutch Master Cylinder

from

$123.27
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

World Brake Resources – Clutch Master Cylinder (Part No.I3000154402WBR)

Clutch Master Cylinder

from

$45.94
WBR premium hydraulic clutch master cylinders are manufactured on state-of-the-art CNC machines, matching the exact OEM design with materials that meet the strict TS 16949 OEM certification. Our brake master cylinders, wheel cylinders, clutch master and slave units use lightweight aluminum or cast iron to match the original design. The EPDM rubber used in WBR cylinders is a long-life formulation, 100% compatible with all types of brake fluid.

Product Features:
  • A robust component manufactured in steel, cast iron, lightweight aluminium or plastic
  • A clutch cylinder that is always 100% end of line tested
  • Clutch cylinders made to the highest OE standards
  • Master cylinders made for lightness, toughness and dependability
See More

LUK – Clutch Master Cylinder (Part No.I3000836221LUK)

Clutch Master Cylinder

from

$139.40
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ATP – Flywheel Ring Gear (Part No.ZA-500)

Flywheel Ring Gear

from

$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

ATP – Flywheel Ring Gear (Part No.ZA-512)

Flywheel Ring Gear

from

$33.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

Hays – Hays450 Cltch 69-81 GM V8:11In:26Spl (Part No.91-1005)

Hays450 Cltch 69-81 GM V8:11In:26Spl

from

$448.99
Hays450 Cltch 69-81 GM V8:11In:26Spl

Hays – Hays650 Cltch 55-85 GM:10.5In:10Spl (Part No.92-1002)

Hays650 Cltch 55-85 GM:10.5In:10Spl

from

$847.99
Hays650 Cltch 55-85 GM:10.5In:10Spl

Hays – Hays650 Cltch 55-85 GM 6-8Cyl:11In:10Sp (Part No.92-1004)

Hays650 Cltch 55-85 GM 6-8Cyl:11In:10Sp

from

$907.99
Hays650 Cltch 55-85 GM 6-8Cyl:11In:10Sp

LuK – Clutch Kit: 10 3/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 26 Tooth Spline (Part No.04-019)

Clutch Kit: 10 3/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 26 Tooth Spline

from

$139.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – Clutch Slave Cylinder (Part No.LSC113)

Clutch Slave Cylinder

from

$57.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC116)

LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER

from

$86.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LuK – Clutch Slave Cylinder (Part No.LSC266B)

Clutch Slave Cylinder

from

$132.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LUK – Clutch Slave Cylinder (Part No.I30101069650LUK)

Clutch Slave Cylinder

from

$221.88
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

LuK – Clutch Slave Cylinder (Part No.LSC115)

Clutch Slave Cylinder

from

$84.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Upgrade your 1989 Chevrolet Corvette with Top-Quality Clutch Systems

When it comes to maintaining or upgrading your 1989 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Clutch Systems are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Clutch Systems for the 1989 Chevrolet Corvette, designed to meet your needs without breaking the bank. From Clutch Master Cylinder replacements to Flywheels upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 1989 Chevrolet Corvette at great prices. Our Clutch Systems inventory for this model ranges from just $3.99 to $499.99, with an average price of $90.59. Our 24 Clutch Systems in stock come from 9 trusted brands, so you’re sure to find the right part for your 1989 Chevrolet Corvette without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 Chevrolet Corvette, we stock popular OEM and aftermarket Clutch Systems from top names like Dorman, ATP, National, and more. Dorman Clutch Systems start at just $3.99 and boast an impressive 4 stars average rating from customers. ATP and National also bring quality to the table, with Clutch Systems available starting at $26.99, and at an average 4 stars rating. With 11 customer reviews and counting, our 1989 Chevrolet Corvette Clutch Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1989 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place. Start shopping confidently below for your 1989 Chevrolet Corvette!

Best-Selling Clutch Master Cylinders for 1989 Chevrolet Corvettes

Enhance the driving experience in your Chevrolet with 2 quality Clutch Master Cylinder components, starting at $53.99.

LuK – Clutch Master Cylinder (Part No.LMC495)

Clutch Master Cylinder

from

$53.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Autopart International Inc – Clutch Master Cylind (Part No.I30002973619API)

Clutch Master Cylind

from

$80.58
Clutch Master Cylind

Most Popular 1989 Chevrolet Corvette Flywheels

Customize your Chevrolet with 15 Flywheels products like Flywheels and Flexplates, Flywheel Bolts, and Flywheel Ring Gears, all priced under $499.99.

ATP – ATP Automatic Transmission Flex Plate (Part No.Z-165)

ATP Automatic Transmission Flex Plate

from

$66.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

Dorman – Help – Flywheel Bolts (Part No.14557)

Flywheel Bolts

from

$10.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)

Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In

from

$11.29
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Hays – Power Train (Part No.10-025)

Power Train

from

$148.99
Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.

Product Features:
  • Thicker Than Stock Steel Plate
  • Ring Gear Securely Welded
  • Dual Bolt Patterns
  • Zinc-Dichromate Plated To Resist Corrosion
  • Withstands High Torque and RPM
See More

Dorman – Flywheel Bolt (Part No.I1005831588DOR)

Flywheel Bolt

from

$16.66
Flywheel Bolt

ATP – FLYWHEEL SHIM (Part No.GS-10)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

ATP – ATP Flywheel Shim (Part No.GS-8)

ATP Flywheel Shim

from

$27.99
ATP Flywheel Shim

ATP – FLYWHEEL SHIM (Part No.GS-4)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

Lakewood – Power Train (Part No.RM-931)

Power Train

from

$117.99
Power Train

Hays – Power Train (Part No.10-530)

Power Train

from

$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:
  • Certified Billet Material
  • Borg and Beck Clutch Pattern
  • Long-Style Clutch Pattern
  • Ring Gear Securely Mounted To Prevent Spinning
See More

Lakewood – Power Train (Part No.RM-930)

Power Train

from

$207.99
Power Train

Lakewood – Power Train (Part No.RM-925)

Power Train

from

$172.99
Power Train

ATP – Flywheel Ring Gear (Part No.ZA-512)

Flywheel Ring Gear

from

$33.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

ARP Auto Racing – ARP Flywheel Bolt Kit (Part No.200-2802)

ARP Flywheel Bolt Kit

from

$24.99
ARP offers two styles of Flywheel bolts: premium grade Pro Series, with a 200,000 psi rating and High Performance, with a 180,000 psi rating. They are both heat-treated prior to thread rolling and machining, feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength and improved flywheel register. Kits include washers and nuts where applicable.

Product Features:
  • 3/4″ 12-Point Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • 7/16″-20 RH Thread Size
  • Set of 6
  • Chevy 90° V6 & 265-454 With 2-pc Rear Seal, Ford 289-460
  • 1″ Underhead Length
See More

Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (Part No.678-154)

Flywheel Bolts - Thread Size 7/16-20; Thread Length 0.900 In. (sold by each)

from

$3.99
This clutch flywheel bolt is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
  • Thread Size: 7/16-20
  • Tread Length: 0.900 in.
  • SAE
  • PLEASE NOTE: Item priced and sold by each. See store for details.
See More

Top Picks for 1989 Chevrolet Corvette Clutch Kits

Upgrade Chevrolet Corvettes with top-quality Clutch Kits parts, including 1 OEM and aftermarket selections for your 1989 model.

LuK – Clutch Kit: 11" Disc Diameter, 1 1/8" Input Shaft Diameter, 26 Tooth Spline (Part No.04-113)

Clutch Kit: 11" Disc Diameter, 1 1/8" Input Shaft Diameter, 26 Tooth Spline

from

$421.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

In-Demand Clutch Pilot Bearings for 1989 Chevrolet Corvettes

Select from 4 premium Clutch Pilot Bearings parts for your 1989 Chevrolet Corvette, with prices ranging from $24.29 to $31.49.

Dorman – Clutch Pilot Bearing/ Bushing (Part No.690-057)

Clutch Pilot Bearing/ Bushing

from

$28.49
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.57080)

Bearings

from

$31.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

GM Genuine Parts – Manual Transmission Clutch Pilot Bearing (Part No.CT1078)

Manual Transmission Clutch Pilot Bearing

from

$24.29
GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Support the end of the transmission input shaft while the clutch is disengaged
  • Allows for smooth changing of gears
  • Helps keep transmission input shaft properly aligned
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Clutch Pilot Bearing/ Bushing (Part No.690-057.1)

Clutch Pilot Bearing/ Bushing

from

$28.99
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Most Sold 1989 Chevrolet Corvette Clutch Slave Cylinders

Explore our best-selling Chevrolet parts for the 1989 Corvette among 1 OEM and aftermarket options starting from $84.99.

LuK – Clutch Slave Cylinder (Part No.LSC115)

Clutch Slave Cylinder

from

$84.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Top-Rated Clutch Systems Brands For Your 1989 Chevrolet Corvette

Shop for the best-rated brands offering Clutch Systems and other products for your 1989 Chevrolet Corvettes. Below you’ll find some of our best rated Clutch Systems from Dorman, ATP, and National, and more. Clutch Systems from these brands that fit a 1989 Corvette start at just $3.99 and are rated as high as 4 stars. OEM and aftermarket Clutch Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 1989 Chevrolet Corvette Clutch Systems

When it comes to maintaining or upgrading your 1989 Chevrolet Corvette, using quality Clutch Systems is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Clutch Systems, specifically designed for the 1989 Chevrolet Corvette. With over 6 Dorman brand Clutch Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99, with an average price of just $16.65. Plus, with over 7 customer reviews and an average rating of 4 stars, you can trust that our Dorman Clutch Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Clutch Pilot Bearing/ Bushing
from
$28.99
This product is not rated

Clutch Pilot Bearing/ Bushing

“”

Flywheel Bolt
from
$16.66
This product is not rated

Flywheel Bolt

“”

Popular ATP 1989 Chevrolet Corvette Clutch Systems

ATP auto parts is one of the highest quality Clutch System brands in the market. Any 1989 Chevrolet Corvette owner should feel confident when installing genuine ATP parts in their vehicle. To ensure the best fit and performance for your 1989 Corvette, Advance Auto Parts carries a full inventory of 5 ATP Clutch Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these ATP Clutch Systems range from $26.99 to $66.99, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Clutch Systems below will deliver on both quality and value.

FLYWHEEL SHIM
from
$26.99
This product is not rated

FLYWHEEL SHIM

“”

FLYWHEEL SHIM
from
$26.99
This product is not rated

FLYWHEEL SHIM

“”

ATP Flywheel Shim
from
$27.99
This product is not rated

ATP Flywheel Shim

“”

FAQs for 1989 Chevrolet Corvette Clutch Systems

Which Clutch Systems are best-sellers for 1989 Chevrolet Corvettes?

Out of 24 Clutch Systems that fit 1989 Chevrolet Corvettes, the following parts are the top sellers:

What’s the price range for 1989 Chevrolet Corvette Clutch Systems?

Clutch System prices for the 1989 Chevrolet Corvette start at $3.99 and go up to $499.99 for the most premium parts.

What’s the average price of a Clutch System for a 1989 Chevrolet Corvette?

The average price for Clutch Systems for the 1989 Chevrolet Corvette is $90.59. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Clutch Systems for other Chevrolet Corvette model years?

Yes, we currently carry Clutch Systems for 64 model years of Chevrolet Corvettes between 1953 and 2019. Clutch Systems are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

What are the cheapest Clutch Systems for my 1989 Chevrolet Corvette?

The cheapest 1989 Chevrolet Corvette Clutch Systems we carry in stock are:

What are the top-rated Clutch Systems that fit the 1989 Chevrolet Corvette?

Out of 11 reviews by customers, our 1989 Chevrolet Corvette Clutch Systems have an average customer rating of . These are some of the highest-rated Clutch System types for the 1989 Chevrolet Corvette and their top-rated products:

What types of Clutch Systems do you sell for my 1989 Chevrolet Corvette?

As of 2/5/25, these are some of the most in-demand types of Clutch Systems for a 1989 Chevrolet Corvette:

Can I get help with 1989 Chevrolet Corvette Clutch System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Clutch Systems and more.

What is your return policy for Chevrolet Corvette Clutch Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.