1989 Buick LeSabre Fuel and Emissions Systems

Essential 1989 Buick LeSabre Fuel and Emissions Systems

Carquest – Fuel Injector (Part No.27012)

Fuel Injector

from

$59.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
See More

ACDelco – GM Original Equipment Fuel Injection Pressure Regulator (Part No.C3000446163ACD)

GM Original Equipment Fuel Injection Pressure Regulator

from

$101.58
An ACDelco GM Original Equipment Fuel Injection Pressure Regulator is a GM-recommended replacement for your vehicle’s original component. The Fuel Injection Pressure Regulator is a mechanical valve that controls the fuel pressure in the fuel injector rail. The spring-loaded valve returns excess fuel back to the fuel tank. This original equipment fuel injection pressure regulator has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Fully tested against leaks
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Lock Ring, Seal (Part No.HP10023)

Fuel Pump Hanger Assembly: With Float Arm, Lock Ring, Seal

from

$316.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Lower failure rates due to its innovative design and durability
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
See More

NTK – Manifold Absolute Pressure Sensor (Part No.MA0097)

Manifold Absolute Pressure Sensor

from

$75.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
  • The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
See More

Dorman – Fuel Sending Unit Without Pump (Part No.692-050)

Fuel Sending Unit Without Pump

from

$106.99
This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
  • Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1502)

Exhaust Gas Recirculation (EGR) Valve

from

$59.99
The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
  • Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
See More

Dorman – Help – Fuel Sending Unit Retainer Kit (Part No.55810)

Fuel Sending Unit Retainer Kit

from

$8.49
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.

Product Features:
  • Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
  • Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – Engine Oil Pressure Indicator and Fuel Pump Cut-Off Switch (Part No.D1808A)

Engine Oil Pressure Indicator and Fuel Pump Cut-Off Switch

from

$39.99
ACDelco GM Original Equipment Fuel Pump and Engine Oil Pressure Indicator Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Help – Carburetor Pre-Heater Hose – 1-1/2 In. X 18 In. – Aluminum (Part No.96020)

Carburetor Pre-Heater Hose - 1-1/2 In. X 18 In. - Aluminum

from

$6.99
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
  • Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spectra Premium – Fuel Filler Neck (Part No.FN601)

Fuel Filler Neck

from

$113.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Unit is dual coated for enhanced corrosion protection
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Tested with OE fuel cap to prevent evaporative emission and check engine light failure
See More

Dorman – Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (Part No.45406)

Clip Nut - Wide Panel-No. 8 X 3/8 In, Panel Range .025 In - .125 In

from

$1.99
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:
  • Constructed of high-quality materials for long-lasting durability
  • Many different styles are available, including threaded and wide panel
  • Packaged in a variety of piece counts for use with both small and large projects
  • Also suitable for a broad range of industrial and commercial uses
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1015)

Manifold Absolute Pressure Sensor (MAP)

from

$65.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Carquest Premium – Idle Air Control Valve (Part No.ABA1661)

Idle Air Control Valve

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT113)

2-Way Female Black Multi-Purpose Pigtail

from

$26.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Fuel Cap: 10632, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10632)

Fuel Cap: 10632, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$10.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

NTK – NTK Oxygen Sensor (Part No.C501063030NTK)

NTK Oxygen Sensor

from

$39.24
NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Extensively Tested During Manufacture to Guarantee Quality and Reliability
  • Supplied With a Factory-Fitted OEM Connector for Easy Installation
See More

Dorman – Oxygen Sensor Pigtail (Part No.645-668)

Oxygen Sensor Pigtail

from

$62.99
Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:
  • Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
  • Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
  • Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
  • Versatile component – this connector can be used in a variety of repairs and custom installations
See More

GM Genuine Parts – Multi-Port Fuel Injector O-Ring Kit with 16 O-Rings (Part No.217-1427)

Multi-Port Fuel Injector O-Ring Kit with 16 O-Rings

from

$19.49
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps provide a seal to prevent fuel leaks
  • Helps seal combustion chamber from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)

Fuel Pressure Relief Valve Cap

from

$6.29
GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6238)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$104.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Carquest Premium – Mechanical Fuel Pump 2542638: Includes Gasket (Part No.2542638)

Mechanical Fuel Pump 2542638: Includes Gasket

from

$40.49
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

ACDelco – GM Original Equipment Fuel Injector O-Ring Kit (Part No.C1013414748ACD)

GM Original Equipment Fuel Injector O-Ring Kit

from

$32.69
The ACDelco GM Original Equipment Fuel Injector O-Ring Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS009)

Fuel Injector Seal Kit

from

$2.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Spectra Premium – Fuel Tank Strap (Part No.ST192)

Fuel Tank Strap

from

$40.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
  • Direct fit ensures safe, secure fuel tank installation
  • Product individually packaged and labeled to help reduce product damage prior to installation
  • Industry leading coverage on straps for plastic tanks
See More

Spectra Premium – Fuel Tank (Part No.GM411A)

Fuel Tank

from

$227.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

Carquest Premium – Idle Speed Control Motor Connector (Part No.PTA1437)

Idle Speed Control Motor Connector

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Fuel Pump Pulsator A3541776 (Part No.A3541776)

Fuel Pump Pulsator A3541776

from

$47.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

1989 Buick LeSabre Fuel and Emissions Systems

You count on your 1989 Buick LeSabre to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 114 Fuel and Emissions Systems ranging in price from $1.49 to $302.99, you’re sure to find everything you need for your 1989 Buick LeSabre.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 17 different brands like Carquest Premium, Dorman, and Bosch. 1989 Buick LeSabre Fuel and Emissions Systems start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 2,047 extensive product reviews on 1989 Buick LeSabre Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Locking Fuel Cap with 4.3 stars and Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack with 4.6 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1989 Buick LeSabre below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1989 Buick LeSabre

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Buick LeSabre running right for years to come. In our inventory you’ll find brands like Carquest Premium, Dorman, Bosch, and even more.

Popular Dorman Fuel and Emissions Systems

You’ll find popular Dorman brand products across Fuel Pumps and Fuel Injectors. All are waiting to get your 1989 Buick LeSabre back on the road. Some of the top-rated Dorman products in these categories are:
GM Panel Retainer
from $4.49
(1)
GM Panel Retainer
Fuel Filler Neck Clip
Fuel Pump Lock Ring
from $6.99
(2)
Fuel Pump Lock Ring
Fuel Tank Lock Rings

Top-Rated Carquest Premium Fuel and Emissions Systems


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1989 Buick LeSabre, and some of our most reviewed Carquest Premium parts include:

FAQs for 1989 Buick LeSabre Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 1989 Buick LeSabre?

Out of 114 Fuel and Emissions Systems for the 1989 Buick LeSabre, the most popular in our inventory are:
Body Bolt - M6-1.0 X 25mm
from $4.49
This product is not rated
Body Bolt – M6-1.0 X 25mm
Secondary Air Injection Pump Bolts

What are the top-rated 1989 Buick LeSabre Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 1989 Buick LeSabre based on customer reviews/ratings are:
Locking Fuel Cap
from $23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
from $24.99
(32)
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Lost old gas cap and replaced with this one, which comes with a lock (which you don’t have to use,FYI)”
Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit
from $32.99
(31)
Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit
“Been installed for a week. CEL is still off.”