1989 Buick Electra Air Intakes

Essential Air Intakes for 1989 Buick Electras

Edelbrock – AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1906)

AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$446.99
The Edelbrock AVS2 Series #1906 is a satin-finished four-barrel carburetor with electric choke that is designed and calibrated for optimum street performance in engines that require an air-fuel flow of 650 CFM. The AVS2 is a perfect replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1906 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets; .070 x .037 metering rods; orange (5″ Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2 with electric choke, order part #19063.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
See More

Dorman – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (Part No.555-018)

Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each)

from

$2.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Air Cleaner Mounting Gasket (Part No.11528)

Air Cleaner Mounting Gasket

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific, providing unsurpassed quality for a seal you can trust
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1743)

Carburetor Tune-Up Kit

from

$24.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Edelbrock – Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors (Part No.12382)

Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors

from

$14.99
Product Features:
  • The Edelbrock #12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 Carburetors.
  • Kit includes two black nitrile fuel bowl gaskets.
See More

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Nylon Grill Bumper Retainer

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1166)

Barometric Pressure Sensor Connector

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Edelbrock – Standard Main Jet Carburetor Metering Jet #12458 Size .057 (Pair) (Part No.12458)

Standard Main Jet Carburetor Metering Jet #12458 Size .057 (Pair)

from

$13.99
The Edelbrock 94 #12458 Carburetor Jets .058″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:
  • 58 Maximum Jet Size
  • 0.057 in. Orifice Diameter
  • 1/14-32 in. Thread Size
  • Standard Main Jet Type
  • Set of 2
See More

Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)

Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip

from

$18.99
Product Features:
  • The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
  • Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.
See More

Carquest – Needle and Seat (Part No.93-554R)

Needle and Seat

from

$9.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
See More

Dorman – Help – Air Cleaner Wing Nut – 1/4 In. (Part No.41200)

Air Cleaner Wing Nut - 1/4 In.

from

$7.99
This air cleaner fastener is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Air Cleaner Wing Nut-Universal Air Cleaner Hardware (Part No.41065)

Air Cleaner Wing Nut-Universal Air Cleaner Hardware

from

$2.99
This air cleaner fastener is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1078)

Air Charge Temperature Sensor

from

$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Multi-Purpose Temperature Sensor (Part No.213-928)

Multi-Purpose Temperature Sensor

from

$35.99
ACDelco GM Original Equipment Multi Purpose Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Felpro – Carburetor Mounting Gasket (Part No.60001)

Carburetor Mounting Gasket

from

$8.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Edelbrock – Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs (Part No.12370)

Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs

from

$19.99
The Edelbrock #12370 comes with fuel bowl and metering block gaskets. The Edelbrock #12370 is designed to be used with Holley 2300, 4150, 4160, 4165, and some 4500 carburetors.

Product Features:
  • Nitrile Rubber Material
  • Metering Block, Fuel Bowl Type
  • Set of 4
  • Fits Holley® 2300, 4150, 4160, 4165, And Some 4500 Carburetors
  • Made In The USA
See More

Wells Vehicle Electronics – Carburetor Choke Pull-Off (Part No.1C1064)

Carburetor Choke Pull-Off

from

$58.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

Wells Vehicle Electronics – Carburetor Choke Pull-Off (Part No.1C1034)

Carburetor Choke Pull-Off

from

$22.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

Carquest Premium – Throttle Position Sensor (Part No.ECC1139)

Throttle Position Sensor

from

$202.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Throttle Position Sensor (Part No.ECC1245)

Throttle Position Sensor

from

$70.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)

Carburetor Accelerator Pump Diaphragm #12401 50cc

from

$31.99
Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.

Product Features:
  • Rubber Material
  • For Holley®, Barry Grant, And Demon Gasoline Carburetors
  • No Hardware Included
  • 50cc Volume
  • Made iIn The USA
See More

Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)

Carburetor Accelerator Pump Diaphragm #12400 30cc

from

$12.99
Product Features:
  • The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
  • Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
See More

Edelbrock – Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg (Part No.12665)

Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg

from

$16.99
Product Features:
  • The Edelbrock #12665 Single Stage 6.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
  • During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
See More

Edelbrock – Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs (Part No.12624)

Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs

from

$12.99
The Edelbrock 94 Carburetor power valve block off #12624 is a great way to fine tune your vintage series carburetor. These Edelbrock Power valve Block Off’s will fit Edelbrock Vintage Series 94 carburetors as well as original Holley 94’s and its later var

Product Features:
  • Fits Any Demon®, Holley®, And Quick Fuel® Carburetors
  • Includes Gasket
  • 1/2 in. x 28 Power Valve Thread
  • For Applications That Prefer To Run Carbs Without The Power Valves
  • Made In The USA
See More

Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)

Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl

from

$13.99
The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:
  • Fits Holley® Carburetors With Center Hung Fuel Bowl
  • Includes Adjusting Nut
  • Includes Locking Screw
  • Includes O-Ring
  • Includes Washers
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 92328)

Engine Intake Manifold Gasket Set

from

$28.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Valley Pan Gasket Set (Part No.MS 96005)

Valley Pan Gasket Set

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Edelbrock – Intake Manifold Gasket for 1967-1976 400-455 Buick (Part No.7246)

Intake Manifold Gasket for 1967-1976 400-455 Buick

from

$30.99
Edelbrock part #7246 Intake Gaskets for 1967-1976 400-455 Buick allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N Micropore technology

Product Features:
  • 1.15″x2.38″
  • Features Embossed Silicone Bead Around The Intake Ports & Water Openings
  • .032″ Thick
  • Two Piece Configuration
  • End Seals Not Included
See More

Upgrade your 1989 Buick Electra with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 1989 Buick Electra, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Air Intakes are key to keeping your Electra functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Air Intakes for the 1989 Buick Electra, designed to meet your needs without breaking the bank. From Carburetor Part replacements to Carburetor Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1989 Buick Electra at great prices. Our Air Intakes inventory for this model ranges from just $2.29 to $510.99, with an average price of $104.76. Our 40 Air Intakes in stock come from 8 trusted brands, so you’re sure to find the right part for your 1989 Buick Electra without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 Buick Electra, we stock popular OEM and aftermarket Air Intakes from top names like ACDelco FELPRO, and more. ACDelco Air Intakes start at just $35.99 and boast an impressive 5 stars average rating from customers. With 150 customer reviews and counting, our 1989 Buick Electra Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1989 Buick Electra is always ready to roll. We’re committed to providing you with everything you need to keep your Electra in top shape, all in one place. Start shopping confidently below for your 1989 Buick Electra!

Best-Selling Carburetor Parts for 1989 Buick Electras

Enhance the driving experience in your Buick with 18 quality Carburetor Part components, starting at $6.99.

Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)

Carburetor Accelerator Pump Diaphragm #12400 30cc

from

$12.99
Product Features:
  • The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
  • Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
See More

Edelbrock – Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1403)

Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$493.99
The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

United Carb – Remanufactured Carburetor 4 Barrel (Part No.11-1255)

Remanufactured Carburetor 4 Barrel

from

$510.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Edelbrock – AVS2 1901 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1901)

AVS2 1901 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$494.99
The Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
See More

Felpro – Carburetor Mounting Gasket (Part No.60335)

Carburetor Mounting Gasket

from

$6.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Edelbrock – Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg (Part No.12665)

Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg

from

$16.99
Product Features:
  • The Edelbrock #12665 Single Stage 6.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
  • During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
See More

Edelbrock – AVS2 1902 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1902)

AVS2 1902 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$436.99
The Edelbrock #1902 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
See More

Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)

Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip

from

$20.99
The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:
  • Center Hung Floats
  • 0.11 in. Needle Diameter
  • Viton® Needle Material
  • Sold Individually
  • Non-Adjustable Type
See More

Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)

Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip

from

$18.99
Product Features:
  • The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
  • Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.
See More

Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)

Carburetor Accelerator Pump Diaphragm #12401 50cc

from

$31.99
Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.

Product Features:
  • Rubber Material
  • For Holley®, Barry Grant, And Demon Gasoline Carburetors
  • No Hardware Included
  • 50cc Volume
  • Made iIn The USA
See More

Edelbrock – Standard Flow Carburetor Power Valve #12655 Single Stage 5.5in Hg (Part No.12655)

Standard Flow Carburetor Power Valve #12655 Single Stage 5.5in Hg

from

$16.99
Product Features:
  • The Edelbrock #12645 Single Stage 5.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
  • During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
See More

Edelbrock – Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs (Part No.12370)

Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs

from

$19.99
The Edelbrock #12370 comes with fuel bowl and metering block gaskets. The Edelbrock #12370 is designed to be used with Holley 2300, 4150, 4160, 4165, and some 4500 carburetors.

Product Features:
  • Nitrile Rubber Material
  • Metering Block, Fuel Bowl Type
  • Set of 4
  • Fits Holley® 2300, 4150, 4160, 4165, And Some 4500 Carburetors
  • Made In The USA
See More

Edelbrock – Standard Flow Carburetor Power Valve #12635 Single Stage 3.5in Hg (Part No.12635)

Standard Flow Carburetor Power Valve #12635 Single Stage 3.5in Hg

from

$16.99
The Edelbrock #12635 Single Stage 3.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation

Product Features:
  • Gasket Or Seal Included
  • 3.5 in. Hg Opening Vacuum
  • Single Stage
  • Standard Flow Type
  • Made In The USA
See More

Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)

Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl

from

$13.99
The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:
  • Fits Holley® Carburetors With Center Hung Fuel Bowl
  • Includes Adjusting Nut
  • Includes Locking Screw
  • Includes O-Ring
  • Includes Washers
See More

Edelbrock – Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair) (Part No.12457)

Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair)

from

$13.99
The Edelbrock 94 #12457 Carburetor Jets .057″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:
  • 57 Maximum Jet Size
  • 0.056 in. Orifice Diameter
  • 1/14-32 in. Thread Size
  • Standard Main Jet Type
  • Set of 2
See More

Edelbrock – Standard Main Jet Carburetor Metering Jet #12456 Size .055 (Pair) (Part No.12456)

Standard Main Jet Carburetor Metering Jet #12456 Size .055 (Pair)

from

$13.99
The Edelbrock 94 #12456 Carburetor Jets .056″ Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:
  • 56 Maximum Jet Size
  • 0.055 in. Orifice Diameter
  • 1/14-32 in. Thread Size
  • Standard Main Jet Type
  • Set of 2
See More

Edelbrock – Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs (Part No.12624)

Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs

from

$12.99
The Edelbrock 94 Carburetor power valve block off #12624 is a great way to fine tune your vintage series carburetor. These Edelbrock Power valve Block Off’s will fit Edelbrock Vintage Series 94 carburetors as well as original Holley 94’s and its later var

Product Features:
  • Fits Any Demon®, Holley®, And Quick Fuel® Carburetors
  • Includes Gasket
  • 1/2 in. x 28 Power Valve Thread
  • For Applications That Prefer To Run Carbs Without The Power Valves
  • Made In The USA
See More

Carquest – Needle and Seat (Part No.93-554R)

Needle and Seat

from

$9.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
See More

Most Popular 1989 Buick Electra Carburetor Kits

Customize your Buick with 6 Carburetor Kits products like Carburetor and Injector Seal Kits and Carburetor Gasket Kit, all priced under $57.99.

Edelbrock – Carburetor Gasket Kit #12380 Fits 4150 And 4160 Carburetors (Part No.12380)

Carburetor Gasket Kit #12380 Fits 4150 And 4160 Carburetors

from

$17.99
Product Features:
  • The Edelbrock #12380 Metering Block gasket is made of black nitrile material and will ensure a leak-free seal from your Carb to the metering block.
  • The Edelbrock #12380 Metering Block gasket will fit 4150 &4160 Carburetors.
  • These will not work with accelerator pump transfer tubes.
See More

Edelbrock – Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors (Part No.12382)

Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors

from

$14.99
Product Features:
  • The Edelbrock #12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 Carburetors.
  • Kit includes two black nitrile fuel bowl gaskets.
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS008)

Fuel Injector Seal Kit

from

$7.79
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Edelbrock – Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)

Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors

from

$43.99
Product Features:
  • The Edelbrock #12750 4160 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
  • The kit comes with the necessary components to rebuild a 4160 style Carburetor.
See More

Edelbrock – Carburetor Repair Kit #12760 Fits Most Holley 4150 Carburetors (Part No.12760)

Carburetor Repair Kit #12760 Fits Most Holley 4150 Carburetors

from

$57.99
Product Features:
  • The Edelbrock #12760 4150 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
  • The kit comes with the necessary components to rebuild a 4150 style Carburetor.
See More

Edelbrock – Carburetor Gasket Kit #12371 Fits 4160 Carburetors (Part No.12371)

Carburetor Gasket Kit #12371 Fits 4160 Carburetors

from

$19.99
The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:
  • Nitrile Rubber Material
  • Metering Block Type
  • Set of 4
  • Fits Holley® 4160 Carburetors
  • Made In The USA
See More

Top Picks for 1989 Buick Electra Intake Manifold Parts

Upgrade Buick Electras with top-quality Intake Manifold Parts parts, including 5 OEM and aftermarket selections for your 1989 model.

ACDelco – Multi-Purpose Temperature Sensor (Part No.213-928)

Multi-Purpose Temperature Sensor

from

$35.99
ACDelco GM Original Equipment Multi Purpose Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (Part No.362633.1)

Steel Cup Expansion Plug 1 In., SC, Height 0.250

from

$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (Part No.555-018)

Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each)

from

$2.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 94066)

Engine Intake Manifold Gasket Set

from

$38.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1078)

Air Charge Temperature Sensor

from

$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

In-Demand Air Cleaner Parts for 1989 Buick Electras

Select from 4 premium Air Cleaner Parts parts for your 1989 Buick Electra, with prices ranging from $2.99 to $7.99.

Felpro – Air Cleaner Mounting Gasket (Part No.60038)

Air Cleaner Mounting Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific, providing unsurpassed quality for a seal you can trust
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Help – Air Cleaner Wing Nut-Universal Air Cleaner Hardware (Part No.41065)

Air Cleaner Wing Nut-Universal Air Cleaner Hardware

from

$2.99
This air cleaner fastener is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Air Cleaner Wing Nut – 1/4 In. (Part No.41200)

Air Cleaner Wing Nut - 1/4 In.

from

$7.99
This air cleaner fastener is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Air Cleaner Wing Nut Assortment 1/4 In.-20, 5/16 In.-18, M8-1.25 (Part No.41072)

Air Cleaner Wing Nut Assortment 1/4 In.-20, 5/16 In.-18, M8-1.25

from

$3.99
This air cleaner fastener is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Most Sold 1989 Buick Electra Throttle Bodies & Carb Parts

Explore our best-selling Buick parts for the 1989 Electra among 3 OEM and aftermarket options starting from $17.79.

Carquest Premium – Throttle Position Sensor (Part No.ECC1139)

Throttle Position Sensor

from

$202.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1166)

Barometric Pressure Sensor Connector

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Throttle Position Sensor (Part No.ECC1245)

Throttle Position Sensor

from

$70.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Top-Rated Air Intakes Brands For Your 1989 Buick Electra

Shop for the best-rated brands offering Air Intakes and other products for your 1989 Buick Electras. Below you’ll find some of our best rated Air Intakes from ACDelco and FELPRO, and more. Air Intakes from these brands that fit a 1989 Electra start at just $3.29 and are rated as high as 5 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.

Popular ACDelco 1989 Buick Electra Air Intakes

When it comes to maintaining or upgrading your 1989 Buick Electra, using quality Air Intakes is essential to ensure durability and a perfect fit. ACDelco ticks all of those boxes. We offer a wide selection of ACDelco Air Intakes, specifically designed for the 1989 Buick Electra. With over 1 ACDelco brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $35.99. Plus, with over 21 customer reviews and an average rating of 5 stars, you can trust that our ACDelco Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Multi-Purpose Temperature Sensor
from
$35.99

(21)

Multi-Purpose Temperature Sensor

“A+”

Popular FELPRO 1989 Buick Electra Air Intakes

FELPRO auto parts is one of the highest quality Air Intake brands in the market. Any 1989 Buick Electra owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 1989 Electra, Advance Auto Parts carries a full inventory of 3 FELPRO Air Intakes. Plus you will be keeping your Buick in peak condition while saving money because prices on these FELPRO Air Intakes range from $3.29 to $38.99, plus, with more than 39 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.

Air Cleaner Mounting Gasket
from
$3.29

(39)

Air Cleaner Mounting Gasket

“Just what I needed.”

Carburetor Mounting Gasket
from
$6.99
This product is not rated

Carburetor Mounting Gasket

“”

Engine Intake Manifold Gasket Set
from
$38.99
This product is not rated

Engine Intake Manifold Gasket Set

“”

FAQs for 1989 Buick Electra Air Intakes

Which Air Intakes are best-sellers for 1989 Buick Electras?

Out of 40 Air Intakes that fit 1989 Buick Electras, the following parts are the top sellers:

What’s the price range for 1989 Buick Electra Air Intakes?

Air Intake prices for the 1989 Buick Electra start at $2.29 and go up to $510.99 for the most premium parts.

What’s the average price of a Air Intake for a 1989 Buick Electra?

The average price for Air Intakes for the 1989 Buick Electra is $104.76. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other Buick Electra model years?

Yes, we currently carry Air Intakes for 31 model years of Buick Electras between 1959 and 1990. Air Intakes are bought most frequently for the following model years: 1990, 1988, 1987, 1986, 1985, 1984, 1983, 1982, and 1981.

What are the cheapest Air Intakes for my 1989 Buick Electra?

The cheapest 1989 Buick Electra Air Intakes we carry in stock are:

What are the top-rated Air Intakes that fit the 1989 Buick Electra?

Out of 150 reviews by customers, our 1989 Buick Electra Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 1989 Buick Electra and their top-rated products:

Can I get help with 1989 Buick Electra Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Air Intakes and more.

What is your return policy for Buick Electra Air Intakes?

Advance Auto Parts keeps returns simple. For new Buick Electra Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.