1989 BMW 525i Suspension Parts

Below you will find various in-demand BMW Suspension Parts, components and accessories for your 1989 525i. Advance Auto Parts has popular 525i parts like Air Suspension and Kits, Trailing Arms, Coil and Leaf Springs and more. You’ll also find aftermarket and OEM Suspension Parts for other 525i model years including 1994, 1995, 2001, 2002, 2003, 2004, 2005, 2006, 2007 and more. Select a category of 1989 BMW 525i Suspension Parts below and start saving instantly.

Popular 1989 BMW 525i Suspension Parts Categories

Suspension Self-Leveling Unit Fluids

Rear Shock and Struts

Front Shock and Struts

Active Suspension Relays

Lower Control Arms

Shock Boots, Levelers, and Accessories

Lower Control Arm Bushings

Strut Bellows

Strut Mounts

Trailing Arm Bushings

Coil Spring Insulators

Strut Bumpers

Coil Spring Shims

Shock Absorber Nuts

Essential Suspension Parts for 1989 BMW 525is

from

$16.48

The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$6.72

Coil Spring Shim

from

$173.74

Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.

Product Features:

Constant damping characteristics under any load
Consistent performance and handling give the vehicle a new car feel every time
Proven BILSTEIN gas pressure technology
High OEM quality standards

from

$119.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$25.88

The Vemo Fuel Pump Relay is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$208.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$30.99

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$36.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$55.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Reduces vibration
UV resistant
No Squeak

from

$22.30

Trailing Arm Bush Se

from

$77.79

Advanced Suspension Technology Control Arm Bushing offers a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:

Unique polyurethane alternative
Sleeves in the bushings freely rotate which enhances longevity
Impregnated with graphite to aid in lubrication and reduce noise
Alternative to conventional rubber suspension bushings

from

$56.65

Unique polyurethane alternative
Sleeves in the bushings freely rotate which enhances longevity
Impregnated with graphite to aid in lubrication and reduce noise
Alternative to conventional rubber suspension bushings

from

$6.65

Coil Spring Shim

from

$14.65

The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$286.11

Constant damping characteristics under any load
Consistent performance and handling give the vehicle a new car feel every time
Proven BILSTEIN gas pressure technology
High OEM quality standards

from

$158.68

Constant damping characteristics under any load
Consistent performance and handling give the vehicle a new car feel every time
Proven BILSTEIN gas pressure technology
High OEM quality standards

from

$264.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$102.25

TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:

Product Features:

Aluminium forged Control Arms
Aluminium cast Control Arms – low weight/high performance
Steel forged Control Arms
Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
Temperature resistant
Low-torque/high comfort solution
Ball stud diameters ranging from 25 to 42mm
Integral and non-integral designs Built in Bushes:
Rubber Bushes
Rubber and Metal Bushes
Hydraulic Bushes

from

$25.49

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$7.19

The Febi Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure.

Product Features:

Made from premium quality cellular polyurethane
Manufactured with design and quality that matches or exceeds OE quality
Resistant to oil and other contaminants

from

$83.62

SACHS Service Kits replace the Original Equipment boot kits and bump stops providing protection to the piston rod preventing damage and prohibiting rust.

Product Features:

SACHS Service Kits help to prolong the life and performance of the shock or strut.
Always replace your Service kits in pairs.
Are built with design and quality that matches or exceeds OE quality

from

$21.86

Febi’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:

Made from premium quality cellular polyurethane
Perfectly compliment OE style struts
Are built with design and quality that matches or exceeds OE quality

from

$55.02

The Corteco strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Pivot for the steering mechanism, providing a smooth steering response
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$82.24

The Lemfoerder strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Pivot for the steering mechanism, providing a smooth steering response
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$49.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
High corrosion resistance
All bearings included are produced by an Original Equipment manufacturer ensuring the highest quality and performance

from

$36.49

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$6.29

Max Performance Synthetic Power Steering Fluid

from

$14.99

Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula is suitable for use in 92% of vehicles in light duty automatic transmissions 2010 and newer. Keep your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand.

Product Features:

The ultimate protection for your automatic transmission
45% stronger against breakdown
Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer

Upgrade your 1989 BMW 525i with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1989 BMW 525i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Suspension Parts are key to keeping your 525i functioning at its best. At Advance Auto Parts, we offer a wide selection of 47 Suspension Parts for the 1989 BMW 525i, designed to meet your needs without breaking the bank. From Air Suspension and Kit replacements to Trailing Arms upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1989 BMW 525i at great prices. Our Suspension Parts inventory for this model ranges from just $1.23 to $208.99, with an average price of $53.45. Our 47 Suspension Parts in stock come from 24 trusted brands, so you’re sure to find the right part for your 1989 BMW 525i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 BMW 525i, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline Moog, and more. Valvoline Suspension Parts start at just $14.99 and boast an impressive 5 stars average rating from customers. With 448 customer reviews and counting, our 1989 BMW 525i Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1989 BMW 525i is always ready to roll. We’re committed to providing you with everything you need to keep your 525i in top shape, all in one place. Start shopping confidently below for your 1989 BMW 525i!

Best-Selling Air Suspension and Kits for 1989 BMW 525is

Enhance the driving experience in your BMW with 5 quality Air Suspension and Kit components, starting at $6.29.

show more show less

from

$36.49

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$208.99

from

$25.88

The Vemo Fuel Pump Relay is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$14.99

The ultimate protection for your automatic transmission
45% stronger against breakdown
Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer

from

$6.29

Max Performance Synthetic Power Steering Fluid

Most Popular 1989 BMW 525i Trailing Arms

Customize your BMW with 1 Trailing Arms products like Trailing Arm Bushings, all priced under $22.30.

show more show less

from

$22.30

Trailing Arm Bush Se

Top Picks for 1989 BMW 525i Coil and Leaf Springs

Upgrade BMW 525is with top-quality Coil and Leaf Springs parts, including 5 OEM and aftermarket selections for your 1989 model.

show more show less

from

$16.48

The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$13.02

The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$8.89

The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$6.49

from

$5.27

The Lemfoerder Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

In-Demand Shocks and Struts for 1989 BMW 525is

Select from 10 premium Shocks and Struts parts for your 1989 BMW 525i, with prices ranging from $1.23 to $184.83.

show more show less

from

$31.49

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$184.83

Constant damping characteristics under any load
Consistent performance and handling give the vehicle a new car feel every time
Proven BILSTEIN gas pressure technology
High OEM quality standards

from

$158.41

Constant damping characteristics under any load
Consistent performance and handling give the vehicle a new car feel every time
Proven BILSTEIN gas pressure technology
High OEM quality standards

from

$89.36

SACHS Service Kits replace the Original Equipment boot kits and bump stops providing protection to the piston rod preventing damage and prohibiting rust.

Product Features:

SACHS Service Kits help to prolong the life and performance of the shock or strut.
Always replace your Service kits in pairs.
Are built with design and quality that matches or exceeds OE quality

from

$85.31

The Vaico strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Pivot for the steering mechanism, providing a smooth steering response
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$61.71

Strut Insert

from

$14.67

The Febi Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure.

Product Features:

Made from premium quality cellular polyurethane
Manufactured with design and quality that matches or exceeds OE quality
Resistant to oil and other contaminants

from

$11.79

APA/URO superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:

Made from premium quality cellular polyurethane
Perfectly compliment OE style struts
Are built with design and quality that matches or exceeds OE quality

from

$3.63

Strut Bellow

from

$1.23

Exhaust Flange Nut

Most Sold 1989 BMW 525i Control Arms

Explore our best-selling BMW parts for the 1989 525i among 26 OEM and aftermarket options starting from $2.96.

show more show less

from

$118.86

Aluminium forged Control Arms
Aluminium cast Control Arms – low weight/high performance
Steel forged Control Arms
Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
Temperature resistant
Low-torque/high comfort solution
Ball stud diameters ranging from 25 to 42mm
Integral and non-integral designs Built in Bushes:
Rubber Bushes
Rubber and Metal Bushes
Hydraulic Bushes

from

$117.81

Aluminium forged Control Arms
Aluminium cast Control Arms – low weight/high performance
Steel forged Control Arms
Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
Temperature resistant
Low-torque/high comfort solution
Ball stud diameters ranging from 25 to 42mm
Integral and non-integral designs Built in Bushes:
Rubber Bushes
Rubber and Metal Bushes
Hydraulic Bushes

from

$113.60

The Meyle control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$110.26

The Meyle control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$97.18

Control Arm

from

$85.00

Control Arm

from

$78.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$78.28

Aluminium forged Control Arms
Aluminium cast Control Arms – low weight/high performance
Steel forged Control Arms
Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
Temperature resistant
Low-torque/high comfort solution
Ball stud diameters ranging from 25 to 42mm
Integral and non-integral designs Built in Bushes:
Rubber Bushes
Rubber and Metal Bushes
Hydraulic Bushes

from

$77.68

Aluminium forged Control Arms
Aluminium cast Control Arms – low weight/high performance
Steel forged Control Arms
Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
Temperature resistant
Low-torque/high comfort solution
Ball stud diameters ranging from 25 to 42mm
Integral and non-integral designs Built in Bushes:
Rubber Bushes
Rubber and Metal Bushes
Hydraulic Bushes

from

$73.16

Control Arm

from

$73.16

Control Arm

from

$72.62

Control Arm

from

$63.76

The ISG control arm is designed and manufactured to exact OEM specifications providing original equipment quality, durability and performance. ISG control arms incorporate ball joints and include bushings that are either original equipment or provide OE-equivalent quality, fit and form.

Product Features:

Designed to fit right the first time, all geometry and pivot axis match OEM placement
Manufactured at TS16949 facilities (OEM grade)
All parts are designed and quality approved using PPAP (Production Part Approval Process)
Available in Forged Steel, Stamped Steel & Forged Aluminum (all meet or exceed OEM specifications)
Service kits are included where applicable, nuts, washers, cotter pins, & zerk fittings
European applications benefit from low friction ball sockets for precise steering feel

from

$57.03

Control Arm Bushing

from

$45.83

CONTROL ARM BUSHING

from

$44.49

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$35.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$31.14

The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$30.79

The FEQ control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$24.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Bushings are resistant to heat, wear, salt, road grime, and oils
Made from a high grade rubber compound
Quality construction for durability
Application specific for this vehicle

from

$21.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$16.82

Control Arm Bushing

from

$14.58

Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:

Delphi bushings are designed to OE standards
Bushings are manufactured for consistent life and to reduce noise
Delphi bushings engineered for durability

from

$10.67

Delphi bushings are designed to OE standards
Bushings are manufactured for consistent life and to reduce noise
Delphi bushings engineered for durability

from

$6.88

The ISG Control Arm Bushing is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$2.96

The FEQ Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

Top-Rated Suspension Parts Brands For Your 1989 BMW 525i

Shop for the best-rated brands offering Suspension Parts and other products for your 1989 BMW 525is. Below you’ll find some of our best rated Suspension Parts from Valvoline and Moog, and more. Suspension Parts from these brands that fit a 1989 525i start at just $14.99 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 1989 BMW 525i Suspension Parts

When it comes to maintaining or upgrading your 1989 BMW 525i, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 1989 BMW 525i. With over 2 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $25.74. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$14.99

This product is not rated

Extended Protection Automatic Transmission Fluid, 1 Quart

“”

from
$36.49

(446)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

“Good product”

Popular Moog 1989 BMW 525i Suspension Parts

Moog auto parts is one of the highest quality Suspension Part brands in the market. Any 1989 BMW 525i owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1989 525i, Advance Auto Parts carries a full inventory of 1 Moog Suspension Parts. Plus you will be keeping your BMW in peak condition while saving money because prices on these Moog Suspension Parts range up to $31.49, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from
$31.49

(2)

Strut Bellows

“Check the box before you leave the store! One had the bellows and bump stop. One only had the bellows.”

FAQs for 1989 BMW 525i Suspension Parts

Which Suspension Parts are best-sellers for 1989 BMW 525is?

Out of 47 Suspension Parts that fit 1989 BMW 525is, the following parts are the top sellers:

Strut Bellows (20518190) – $31.49
Suspension Wishbone (10782717) – $30.79
ISG Wishbone (11975239) – $63.76

What’s the price range for 1989 BMW 525i Suspension Parts?

Suspension Part prices for the 1989 BMW 525i start at $1.23 and go up to $208.99 for the most premium parts.

What’s the average price of a Suspension Part for a 1989 BMW 525i?

The average price for Suspension Parts for the 1989 BMW 525i is $53.45. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other BMW 525i model years?

Yes, we currently carry Suspension Parts for 13 model years of BMW 525is between 1990 and 2007. Suspension Parts are bought most frequently for the following model years: 2007, 2006, 2005, 2004, 2003, 2002, 2001, 1995, and 1994.

What are the cheapest Suspension Parts for my 1989 BMW 525i?

The cheapest 1989 BMW 525i Suspension Parts we carry in stock are:

Exhaust Flange Nut (12504014) – $1.23
Control Arm Bushing (10781946) – $2.96
Strut Bellow (12148211) – $3.63
Lemfoerder Coil Spring Shim (10770506) – $5.27
Max Performance Synthetic Power Steering Fluid (11150908) – $6.29

What are the top-rated Suspension Parts that fit the 1989 BMW 525i?

Out of 448 reviews by customers, our 1989 BMW 525i Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1989 BMW 525i and their top-rated products:

Shocks and Struts
- Strut Bellows (20518190) – $31.49

What types of Suspension Parts do you sell for my 1989 BMW 525i?

As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 1989 BMW 525i:

Can I get help with 1989 BMW 525i Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Suspension Parts and more.

What is your return policy for BMW 525i Suspension Parts?

Advance Auto Parts keeps returns simple. For new BMW 525i Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1989 BMW 525i Suspension Parts

APA/URO Parts – Coil Spring Shim (Part No.L5007317759APA)

MTC – Coil Spring Shim (Part No.L5007264840MTC)

Bilstein – B4 OE Replacement – Shock Absorber (Part No.L4000400679BIL)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920268)

Vemo – Fuel Pump Relay (Part No.P2037117620VMO)

Carquest Premium – Active Suspension Relay (Part No.RAA2111)

Monroe – Strut-Mate Strut Boot Kit (Part No.63638)

MOOG – Strut Bellows (Part No.K90467)

Rare Parts – Trail Arm Bush (Part No.RP16419)

Meyle – Trailing Arm Bush Se (Part No.L200739135MEY)

AST – Polyurethane Control Arm Bushing (Part No.L2030578809AST)

AST – Polyurethane Control Arm Bushing (Part No.L20301094699AST)

MTC – Coil Spring Shim (Part No.L5007264412MTC)

APA/URO Parts – Coil Spring Shim (Part No.L5007317864APA)

Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000400678BIL)

Bilstein – B4 OE Replacement – Strut Insert (Part No.L3005396462BIL)

Dorman – Suspension Control Arm (Part No.526-985)

TRW – Suspension Wishbone (Part No.L2000180398TRW)

KYB – Jounce Bumper and Bellows (Part No.SB110)

Febi – Strut Bellows / Dust Boot (Part No.L3037127539FEB)

Sachs – Strut Bump Stop Service Kit (Part No.L3045938638SAC)

Febi – Strut Bump Stop (Part No.L3036243245FEB)

Corteco – Strut Mount (Part No.L303038516CFW)

Lemfoerder – Strut Mount (Part No.L303077954LEM)

Rein – Strut Mount (Part No.AVQ0372R)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Carquest Premium – Active Suspension Relay (Part No.RAA2111)

Vemo – Fuel Pump Relay (Part No.P2037117620VMO)

Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

Meyle – Trailing Arm Bush Se (Part No.L200739135MEY)

APA/URO Parts – Coil Spring Shim (Part No.L5007317759APA)

APA/URO Parts – APA/URO Coil Spring Shim (Part No.L5007264831APA)

APA/URO Parts – APA/URO Coil Spring Shim (Part No.L5007255743APA)

Rein – Spring Pad (Part No.AVP0198P)

Lemfoerder – Lemfoerder Coil Spring Shim (Part No.L500777947LEM)

MOOG – Strut Bellows (Part No.K90464)

Bilstein – B4 OE Replacement – Strut Insert (Part No.L3005396834BIL)

Bilstein – B4 OE Replacement – Shock Absorber (Part No.L4000396981BIL)

Sachs – Strut Bump Stop Service Kit (Part No.L3045938647SAC)

Vaico – Strut Mount (Part No.L303077951VCO)

Autopart International Inc – Strut Insert (Part No.L3005467857API)

Febi – Strut Bellows / Dust Boot (Part No.L3037243693FEB)

APA/URO Parts – Strut Bump Stop (Part No.L303677948APA)

Meyle – Strut Bellow (Part No.L303777952MEY)

Elring – Exhaust Flange Nut (Part No.H10082671599ELR)

TRW – Suspension Wishbone (Part No.L200030365TRW)

TRW – Suspension Wishbone (Part No.L200030364TRW)

Meyle – Suspension Rod (Part No.L2000722969MEY)

Meyle – Suspension Rod (Part No.L2000722968MEY)

Autopart International Inc – Control Arm (Part No.L20001954797API)

Autopart International Inc – Control Arm (Part No.L20001986092API)

Rare Parts – Control Arm Bush (Part No.RP22141)

TRW – Suspension Wishbone (Part No.L200030429TRW)

TRW – Suspension Wishbone (Part No.L200030428TRW)

Autopart International Inc – Control Arm (Part No.L20001927771API)

Autopart International Inc – Control Arm (Part No.L20001952501API)

Autopart International Inc – Control Arm (Part No.L20001985796API)

International Suspension Group – ISG Wishbone (Part No.L200030428ISG)

AST – Control Arm Bushing (Part No.L2030574677AST)

Worldpac – CONTROL ARM BUSHING (Part No.L20304143273MEY)

Rare Parts – Control Arm Bushing (Part No.RP19346)

Dorman – Suspension Control Arm Bushing (Part No.533-606)

Lemfoerder – Control Arm Bushing (Part No.L203031182LEM)

FEQ – Suspension Wishbone (Part No.L200030365FEQ)

Beck/Arnley – Control Arm Bushing Set (Part No.101-6296)

Dorman – Suspension Control Arm Bushing (Part No.533-639)

Rein – Control Arm Bushing (Part No.L203031182RIN)

Delphi – Control Arm Bushing (Part No.L203031183DEL)

Delphi – Control Arm Bushing (Part No.L203025332DEL)

International Suspension Group – Control Arm Bushing (Part No.L203025332ISG)

FEQ – Control Arm Bushing (Part No.L203025332FEQ)