1988 Volkswagen Golf Engine Mounts
More 1988 Volkswagen Golf Engine Mounts
Find your specific 1988 Volkswagen Golf original or aftermarket Engine Mounts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1988 Volkswagen Golf Engine Mounts
Anchor – Engine Mount: Rear, 1 Piece (Part No.9920)
from
$53.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 04-18; VW 06-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2004-2021
- Weight approx: 1 Lbs
- ENGINE CRADLE
- HEIGHT: 1.22 INCH / 31 MM
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: THREADED
Anchor – Engine Mount: Rear, 1 Piece (Part No.9263)
from
$34.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 06-13; SEAT 08-19; VW 05-18;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2005-2019
- Weight approx: 1 Lbs
- ENGINE CRADLE
- HEIGHT: 1.42 INCH / 36 MM
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: THREADED
Rein – Engine Mount (Part No.AVE0009R)
from
$49.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
- Produced by an Original Equipment supplier
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
Anchor – Engine Mount: Right, 1 Piece (Part No.9092)
from
$112.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 06-15; VW 98-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1998-2021
- Weight approx: 5 Lbs
- HYDRAULIC
Anchor – Engine Mount: Front, 1 Piece (Part No.8617)
from
$27.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 93-02;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1993-2002
- Weight approx: 2 Lbs
- RUBBER MOUNT
Corteco – Engine Mount (Part No.A7000121461CFW)
from
$69.21
CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce engine vibration and noise Vibration Control Brochure
Anchor – Engine Mount: Left, Right, 1 Piece (Part No.9264)
from
$21.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 98-11;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1998-2011
- Weight approx: 1 Lbs
- SUSPENSION SUBFRAME
- ENGINE CRADLE BUSHING
Hutchinson – Hutchinson Engine Mount (Part No.A7000121460HUT)
from
$107.88
The Hutchinson Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce engine vibration and noise.
Anchor – Engine Mount: Right, Rear Right, 1 Piece (Part No.8841)
from
$34.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 93-02;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1993-2002
- Weight approx: 4 Lbs
Corteco – Corteco Engine Mount (Part No.A7000121458CFW)
from
$96.09
CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce engine vibration and noise Vibration Control Brochure
Anchor – Engine Mount: Front, 1 Piece (Part No.8224)
from
$32.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 85-98;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1998
- Weight approx: 4 Lbs
- HYDRAULIC
Autopart International Inc – Engine Mount (Part No.A70003156777API)
from
$132.55
Engine Mount
Energy Suspension – MotorMt (Part No.15.1106R)
from
$29.99
MotorMt
Whiteline – Engine Pitch Mount Bushing (Part No.KDT977)
from
$160.99
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline’s torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Anchor – Engine Mount: Rear, 1 Piece (Part No.9919)
from
$44.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 15-23; VW 15-23;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2015-2023
- Weight approx: 1 Lbs
- ENGINE CRADLE
- PART GROUP: 9918, 9919
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: THREADED
Whiteline – Engine Pitch Mount Bushing (Part No.KDT975)
from
$233.99
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline’s torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Anchor – Engine Mount: Front, Rear, 1 Piece (Part No.9607)
from
$76.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 93-99;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1993-1999
- Weight approx: 3 Lbs
- HYDRAULIC
Anchor – Engine Mount: Front, 1 Piece (Part No.8637)
from
$87.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 85-99;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1999
- Weight approx: 4 Lbs
- HYDRAULIC
Energy Suspension – MotorMt (Part No.15.1106G)
from
$30.99
MotorMt
Rein – Engine Mount (Part No.AVE0381R)
from
$92.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
- Produced by an Original Equipment supplier
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
Anchor – Engine Mount: Right, 1 Piece (Part No.9658)
from
$109.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 00-06; VW 00-06;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2000-2006
- Weight approx: 5 Lbs
- HYDRAULIC
Rein – Engine Mount (Part No.AVE0363R)
from
$55.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
- Produced by an Original Equipment supplier
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
Anchor – Engine Mount: Rear Right, Right, 1 Piece (Part No.8222)
from
$21.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 85-99;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1999
- Weight approx: 3 Lbs
Anchor – Engine Mount: Rear, 1 Piece (Part No.9918)
from
$52.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 15-23; VW 15-23;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2015-2023
- Weight approx: 1 Lbs
- ENGINE CRADLE
- PART GROUP: 9918, 9919
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: NO THREADS
Anchor – Engine Mount: Right, Rear Right, 1 Piece (Part No.9065)
from
$61.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VW 92-99;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1992-1999
- Weight approx: 4 Lbs
- HYDRAULIC
Whiteline – Engine Torque Arm Bushing (Part No.KDT914)
from
$40.99
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline’s torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Rein – Engine Mount (Part No.AVE0506)
from
$51.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
- Produced by an Original Equipment supplier
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
Whiteline – Trans Mount Insert (Part No.KDT968)
from
$40.99
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline’s torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Install guide included providing detailed instructions on how to install your new purchase .
Popular 1988 Volkswagen Golf Engine Mounts Categories
1988 Volkswagen Golf Engine Mounts
Maybe you’re in the middle of a full rebuild of that 1988 Volkswagen Golf. Maybe you just need a couple of Engine Mounts. Either way, Advance Auto Parts has 3 different Engine Mounts in our inventory ranging from $21.99 to $87.99. That means you can find the exact parts or products you need to keep that 1988 Volkswagen Golf running smoothly.
Engine Mounts are only as good as their brand. We stock 1 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Volkswagen Golf. Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Mounts for your 1988 Volkswagen Golf, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Engine Mounts to keep your 1988 Volkswagen Golf rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Mounts Brands To Make Your 1988 Volkswagen Golf Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Volkswagen Golf demands trusted brand parts and products to keep it running. Many trusted brands of Engine Mounts make up Advance Auto Parts’ inventory, and all are ready to help make your Golf the best it can be. Be sure to browse some of our top Engine Mounts brands and parts.
FAQs for 1988 Volkswagen Golf Engine Mounts
What are the most purchased Engine Mounts for the 1988 Volkswagen Golf?
Out of 3 Engine Mounts for the 1988 Volkswagen Golf, the most popular in our inventory are:
