from

$126.99

Bearing race driver front Toyota 7.5″, 8″, Landcruiser, and the Suzuki Samurai. No return. (TOY30306).

Product Features:

Bearing race driver
Fits 30306 race
All steel construction

from

$35.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$39.99

8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:

Pinion depth shim kit for Toyota 7.5″, 8″ and V6

from

$419.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Toyota Landcruiser reverse rotation front
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.

from

$274.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits standard rotation Toyota Landcruiser
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$81.95

Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.

Product Features:

For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.

from

$524.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. A yoke and ring gear bolt kit are required for this gear set.

Product Features:

Fits Toyota 9.5″ Landcruiser
9.50″ ring gear diameter
27 spline pinion
10 ring gear bolts
4.88 ratio

from

$22.99

Product Features:

Ring gear bolt and nut kit
Fits Toyota Landcruiser
Includes one bolt and one nut

from

$13.99

Crush Sleeve for Toyota V6, Landcruiser reverse front & Tacoma/T100 with factory locker, 1.820″ long.

Product Features:

Crush sleeve for Toyota V6, Landcruiser reverse rotation front and Tacoma/T100 with factory locker
1.820″ tall

from

$6.79

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$9.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$103.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. No side shims.

Product Features:

Fits standard rotation Toyota Landcruiser
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$1099.99

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts.

Product Features:

Fits Toyota 9.5″ Landcruiser with 30 spline axles
Patented internal design reduces common locker failures
8620 internals for added strength
Assembled in the USA

from

$28.99

Landcruiser standard Open side gear Thrust washer.

Product Features:

Side gear thrust washer
Fits Toyota Landcrusier

from

$32.99

Product Features:

Cross pin shaft
Fits Toyota Landcruiser

from

$5.99

Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landrcuiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.

Product Features:

Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landcruiser with 30 spline pinion and Tacoma/T100 with factory locker
20mm x 1.5 thread
30mm socket

from

$8.99

Toyota Landcruiser ring gear nut for ring gear bolt.

Product Features:

Ring gear nut
Fits Toyota Landcruiser

from

$55.99

Yukon small hole yoke for ’82 and older Toyota 8″ and Landcruiser with 27 spline. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits 1982 and down Toyota Landcruiser
27 spline

from

$169.99

Yukon yoke for ’78 to ’84 Toyota Lancruiser with 27 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits 1978-1984 Toyota Landcruiser
27 spline

from

$46.99

Product Features:

Outer slinger
Fits Toyota Landcruiser reverse rotation front

from

$10.99

Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:

Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser

from

$31.99

Product Features:

Pinion gear thrust washer
Fits Toyota Landcrusier

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$21.99

Product Features:

KIT SHIM SIDE 9.5″ GM

from

$603.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

Fits Toyota 9.5″ Landcruiser with 30 spline axles
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

1988 Toyota Land Cruiser Differentials

More 1988 Toyota Land Cruiser Differentials

Essential 1988 Toyota Land Cruiser Differentials

Yukon Gear – Bearing Race Driver (Part No.56005)

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Yukon Gear – Bearing Install Kit For ’91-’97 Toyota Landcruiser Front Differential (Part No.11107)

Yukon Gear – Pinion Install Kit For Toyota Landcruiser Differential (Part No.13091)

NTN – BCA Wheel Bearing (Part No.K8000279217NTN)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota Land Cruiser In A 4.88 Ratio (Part No.24551)

Yukon Gear – Toyota Landcruiser Ring Gear Bolt & Nut Kit (Part No.33200)

Yukon Gear – Crush Sleeve (Part No.33118)

Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)

Driveworks – Oil Seal (Part No.S-1177)

Yukon Gear – Minor Install Kit For Toyota Landcruiser Differential (Part No.12074)

Yukon Gear – Grizzly Locker For Toyota Landcruiser, 30 Spline (Part No.28032)

Yukon Gear – Landcruiser Standard Open Side Gear Thrust Washer (Part No.33400)

Yukon Gear – Landcruiser Standard Open Cross Pin Shaft (Part No.33419)

Yukon Gear – Pinion Nut (Part No.33156)

Yukon Gear – Toyota Landcruiser Ring Gear Nut For Ring Gear Bolt (Part No.33062)

Yukon Gear – Small Hole Yoke For ’82 And Older Toyota 8" And Landcruiser With 27 Spline (Part No.41102)

Yukon Gear – Yoke For ’78 To ’84 Toyota Lancruiser With 27 Spline Pinion (Part No.41110)

Yukon Gear – Toyota Landcruiser Reverse Rotation Front Outer Oil Slinger (Part No.33028)

Yukon Gear – Outer Oil Slinger (Part No.33025)

Yukon Gear – Landcruiser Standard Open Pinion Gear Thrust Washer (Part No.33394)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)

USA Standard Gear – Spartan Locker For Toyota 95" Landcruiser With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17033)

Popular 1988 Toyota Land Cruiser Differentials Categories

1988 Toyota Land Cruiser Differentials

Differentials Brands To Make Your 1988 Toyota Land Cruiser Last

Popular National Differentials

FAQs for 1988 Toyota Land Cruiser Differentials

What are the most purchased Differentials for the 1988 Toyota Land Cruiser?

More Popular Parts for All Makes