1988 Pontiac 6000 Brake Parts

Below you will find various in-demand Pontiac Brake Parts, components and accessories for your 1988 6000. Advance Auto Parts has popular 6000 parts like Brake Hoses, Brake Calipers, Brake Pads and Shoes and more. You’ll also find aftermarket and OEM Brake Parts for other 6000 model years including 1982, 1983, 1984, 1985, 1986, 1987, 1989, 1990, 1991 and more. Select a category of 1988 Pontiac 6000 Brake Parts below and start saving instantly.

Popular 1988 Pontiac 6000 Brake Parts Categories

Front Brake Rotors

Rear Brake Pads and Shoes

Front Brake Pads and Shoes

Rear Brake Drums

Front Brake Calipers

Brake Wheel Cylinders

ABS Modulator Relays

Parking Brake Cable Connectors

Brake Caliper Bolt and Pins

ABS Relays

Brake Master Cylinders

Brake Hoses

Brake Hardware Kits

Hold Down Spring Top Cup

ABS Harness Connectors

Master Cylinder Caps and Gaskets

Brake Hose To Caliper Bolt Washers

Brake Hose Bolts

Power Brake Booster Check Valves

Parking Brake Cables

Brake Fluid Sensors

Power Brake Booster Switch Connectors

ABS Control Module Bolts

Brake Hold Down Springs

Brake Caliper Kits

Brake Anti-Rattle Springs

Parking Brake Springs

ABS Switch Connectors

Parking Brake Switches

Brake Shoe Clips

Brake Caliper Bushings

Essential Brake Parts for 1988 Pontiac 6000s

from

$22.79

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$82.99

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders.

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.

from

$33.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$7.31

New Brake Hardware – Back to like-new performance The WBR complete disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal like new operating condition. Disc hardware can lose 50% of spring tension within 1-2 years, which can cause pads to stick, create uneven pad wear, and lead to unwanted brake noise.

Product Features:

Reduced Brake Noise, comebacks and unsatisfied customers,
Extends the life of a brake job,
Improved fuel mileage, and
Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
reduce effective braking force
cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
cause excessive caliper movement
cause unwanted noise like rattles and thumps.

from

$3.79

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:

This part matches Original Equipment (OE) quality specifications
Fast and efficient replacement
Eliminates heat and corrosion deterioration

from

$39.99

The ACDelco GM Original Equipment Power Brake Booster Check Valve functions as a one-way valve that ensures air does not enter the vacuum booster when the engine is turned off or if there is a leak in the vacuum hose, and is a GM-recommended replacement for your vehicle’s original components. This power brake booster check valve has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured with GM Original Equipment specification for fit, form, and function

from

$8.29

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$10.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

This part matches Original Equipment (OE) quality specifications
Easy and fast replacement
Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured with quality materials to suppress high stress levels

from

$26.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$34.49

Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
Proper harmonic design and balance helps to reduce brake noise and vibration
Optimal metallurgy and casting thickness to preventing warping

from

$58.73

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

High metallurgical and machining standard to improve stopping distances
Produced to match OE design fitment – G 3000 gray iron
Mill balanced
TS16949 certified
Non-directional finish provides smooth vibration free performance
No need for machining prior to installation
Durable Metallurgic-Gray finish to all outward non-friction surfaces
Metallurgic-Gray anti-rust protection to help maintain a clean appearance
Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
Designed to minimize brake fade and extend pad and rotor life
24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

from

$39.49

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
Meets or exceeds original equipment specifications for performance and durability
OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
Application-specific caliper bodies for easy installation
Brackets included where required, for complete system restoration
OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
New bleeder screws, banjo bolts, and crush washers included for a complete repair
OE Style, stainless steel pad abutment hardware included
100% end-of-line inspection and pressure testing ensures quality and performance
Caliper finish or coating may vary

from

$20.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$2.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Eliminates heat and corrosion deterioration
Helps deliver a quieter, more efficient braking system

from

$24.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$9.99

This brake hydraulic hose lock clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose lock clip matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$43.99

The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium hardware for easy installation

from

$2.99

Hardware consists of a variety of parts designed to assist in restoring your brake system to Like New Performance. Caliper anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too.

Product Features:

This part matches Original Equipment (OE) quality specifications
Exact fitment and original replacement
New Brake Hardware prevents noise and premature wear
Helps deliver a quieter, more efficient braking system

from

$9.49

This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles.
Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Brake Fluid Level Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper braking functionality.
The Brake Fluid Level Sensor is responsible for detecting the amount of brake fluid present in the vehicle’s brake master cylinder reservoir.

from

$24.99

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$5.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$5.99

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down springs are designed to secure the brake shoes to the backing plate while allowing proper brake shoe movement.

Product Features:

This part matches Original Equipment (OE) quality specifications
Manufactured with quality materials to suppress high stress levels
Maintains safe movement and effective stopping performance

from

$15.99

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

from

$2.29

This brake hydraulic hose caliper bolt washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
Quality design – inner cables are sheathed and lubricated to provide improved durability
Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
Tough materials – zinc-plated fittings prevent corrosion

from

$21.49

Parking brake cable equalizer corroded? This parking brake cable equalizer directly replaces the original manufacturer part to restore proper operation.

Product Features:

Direct replacement – this parking brake cable equalizer matches the fit, function and performance of the original manufacturer cable.
Restores performance – enables proper operation of parking brake by equalizing cable tension
Thoroughly tested – must pass strict material and torque testing to ensure quality and longevity
Trustworthy quality – backed by team of engineers and inspectors in United States

from

$4.49

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

Upgrade your 1988 Pontiac 6000 with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1988 Pontiac 6000, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Brake Parts are key to keeping your 6000 functioning at its best. At Advance Auto Parts, we offer a wide selection of 73 Brake Parts for the 1988 Pontiac 6000, designed to meet your needs without breaking the bank. From Brake Hose replacements to Brake Calipers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1988 Pontiac 6000 at great prices. Our Brake Parts inventory for this model ranges from just $1.29 to $77.10, with an average price of $25.22. Our 73 Brake Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 1988 Pontiac 6000 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1988 Pontiac 6000, we stock popular OEM and aftermarket Brake Parts from top names like Dorman, Carquest, Carquest Premium, and more. Dorman Brake Parts start at just $1.29 and boast an impressive 4 stars average rating from customers. Carquest and Carquest Premium also bring quality to the table, with Brake Parts available starting at $1.99, and at an average 4 stars rating. With 2,730 customer reviews and counting, our 1988 Pontiac 6000 Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1988 Pontiac 6000 is always ready to roll. We’re committed to providing you with everything you need to keep your 6000 in top shape, all in one place. Start shopping confidently below for your 1988 Pontiac 6000!

Best-Selling Brake Hoses for 1988 Pontiac 6000s

Enhance the driving experience in your Pontiac with 13 quality Brake Hose components, starting at $1.99.

show more show less

from

$20.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$8.49

This brake hydraulic hose to caliper bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake hydraulic hose to caliper bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$19.79

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$9.99

Direct replacement – this brake hydraulic hose lock clip matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

Direct replacement – this brake hydraulic hose to caliper bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.29

Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.49

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A Brake Hose Banjo Bolt or Inlet Bolt are perforated hollow bolts that allow brake fluid transfer.

Product Features:

This part matches Original Equipment (OE) quality specifications
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$17.79

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$18.79

ACDelco Brake Hydraulic Hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each brake hose contains double-crimped fittings to provide longer service life and durability. The ACDelco Professional Brake Hydraulic Hose is a high quality replacement component for your vehicle’s braking system.

Product Features:

Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
Premium brass fittings provide an excellent hydraulic seal
Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety

from

$21.49

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
Brand may vary by location

from

$17.29

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

from

$1.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Banjo Bolts allow the brake fluid to transfer

Product Features:

This part matches Original Equipment (OE) quality specifications
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

Top Picks for 1988 Pontiac 6000 Brake Pads and Shoes

Upgrade Pontiac 6000s with top-quality Brake Pads and Shoes parts, including 10 OEM and aftermarket selections for your 1988 model.

show more show less

from

$40.99

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$37.99

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$52.99

Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:

Application-specific friction formulations provide shorter stopping distances and extended pad life
Hardware included for most applications
OE-designed slots and chamfers to reduce noise and vibration
Multi-layer shim provides near silent braking
Powder-coated backing plate prevents corrosion

from

$28.99

Dependable stopping power
Singler layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration
Powder-coated backing plate prevents corrosion

from

$45.02

Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.

Product Features:

Original Equipment Performance
Solid Pedal Feel With Smooth Braking Performance
Ultra-Quiet Ceramic Formulation
Low Dust – Long Life
Advanced Material Platform Specific Shims
Scorched for Easy Break In
Positive Mold Construction
All WBR Pads are 100% Shimmed

from

$69.82

Choosing the right Semi Metallic brake pads is a big decision: after all, they will be fitted to a vehicle carrying precious cargo; so you need to make an informed choice and get it right. With more than 100 years’ experience, we are pioneers in the development of braking systems and technologies and work closely with the world’s leading vehicle manufacturers. As a consumer, you should expect safety, quality and performance from a brake pad. With its superior range of Semi Metallic Brake Pads, TRW offers you all that, and more. We design our Semi Metallic Brake Pads using vehicle-optimized friction formulations which are focussed on eliminating noise, vibration and harshness (NVH) and severely reducing wheel dust; while at the same time increasing durability and smooth braking actions. We engineer our brake pads to precise Original Equipment (OE) standards, and test them to the extreme both in the lab and in real life, real road situations at every speed and on every terrain. In addition, our Semi Metallic Brake Pads deliver what we in the business call ‘fadeless performance’ to counteract the heat that braking in heavy traffic creates which could result in a lack of performance. All TRW products are taken to market under the ‘Safety’ strapline. We never deviate from this and we never compromise because we believe that every stop could be that safety critical stop. We wouldn’t put our name to something that we wouldn’t fit in our own vehicles to transport our own families. All of this adds up to one fact: You really can trust TRW to provide superior Semi Metallic Brake Pads to deliver the ultimate in braking experience.

Product Features:

For the best and safest performance – we mirror OE and provide the optimum friction formulation for each make and model
For the quietest braking – TRW applies ‘bonded Nitrile rubber-coated steel shims; proven to be the best noise damping material to all its Semi Metallic Brake Pads
The intelligent design includes slots and chamfers which prevents dirt and dust build up on the friction surface; giving more effective contact and reducing noise
Using the latest technology, TRW designs its Semi Metallic Brake Pads with an emphasis on dust reduction; giving you the safest stop while keeping your wheels clean
We provide all necessary accessories, including installation hardware and grease, together with fitting instructions with each part for a safe and easy brake pad change
TRW covers 98% of all vehicles on the road in North America both imports and domestic

from

$60.78

Bosch QuietCast Premium raises aftermarket brake pad technology to a whole new level. Employing the industry’s best pre-attached, rubber core shims and Molded Shim Technology (on selected applications), QuietCast delivers the quiet operation you and your customers expect with the durability and long life that are the hallmarks of all Bosch products. Every Bosch QuietCast Disc Brake Pad is fitted with the industry’s best pre-attached rubber core shim. This shim style is the most predominant type used by OE manufacturers and is exclusively offered by Bosch for the independent aftermarket.

Product Features:

OE-Equivalent and Direct Fit application.
OE style rubber-core shims
Advanced, platform-specific Semi Metallic formulation
Dedicated engineers source and rigorously test all friction materials and formulations
Manufactured under the same exacting quality standards as OE components and system
Powder-coated backing plate
Rigorous physical and dynamometer testing
Synthetic lubricant in box
Pads individually wrapped Bosch Molded Shim Technology (MST)*** (On Select Applications)
At the time of pressing, heat, adhesive and pressure mold the multi-layer shim to the backing plate and friction material creating an integrally molded unit.
Shim stays attached throughout the life of the pad; won’t walk or slide on the backing plate
Provides maximum stability resulting in quieter shim performance over the life of the pad

from

$45.99

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium hardware for easy installation

from

$43.99

PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
The pad surfaces are thermal scorched for fast break-in
Includes premium stainless-steel hardware for hassle free installation
Multi-Layer rubberized shims provide virtually noise-free braking
Includes Premium hardware for easy installation

from

$37.99

The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
Positive mold technology for consistent wear and performance
Thermal scorched pad surface for a fast break-in
Chamfered and slotted to ensure noise-free braking
Powder coated backing plate resists rust and corrosion to provide extended pad life
Multi-Layer rubberized shims provide virtually noise-free braking

In-Demand Brake Rotors and Drums for 1988 Pontiac 6000s

Select from 4 premium Brake Rotors and Drums parts for your 1988 Pontiac 6000, with prices ranging from $34.49 to $77.10.

show more show less

from

$34.49

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
Proper harmonic design and balance helps to reduce brake noise and vibration
Optimal metallurgy and casting thickness to preventing warping

from

$58.99

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Matches OE vane size for proper cooling
Optimal metallurgy and casting thickness to preventing warping
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break-in time.

from

$77.10

ACDelco Advantage brake rotors and drums feature the fit, form and function of premium aftermarket brakes at a more economical price. The ACDelco Advantage line offers dependability, performance and great value – without sacrificing important features and benefits.

Product Features:

No machining required – ready to be installed right out of the box
Rust-preventative coating
Non-directional brake surface finish for consistent braking
Chamfer angle follows the OE design

from

$58.73

High metallurgical and machining standard to improve stopping distances
Produced to match OE design fitment – G 3000 gray iron
Mill balanced
TS16949 certified
Non-directional finish provides smooth vibration free performance
No need for machining prior to installation
Durable Metallurgic-Gray finish to all outward non-friction surfaces
Metallurgic-Gray anti-rust protection to help maintain a clean appearance
Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
Designed to minimize brake fade and extend pad and rotor life
24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

Most Sold 1988 Pontiac 6000 Brake Kits

Explore our best-selling Pontiac parts for the 1988 6000 among 4 OEM and aftermarket options starting from $4.49.

show more show less

from

$10.99

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:

This part matches Original Equipment (OE) quality specifications
Contains all the necessary hardware for easy installation
Manufactured to restrain high tolerances with quality materials
Helps deliver a quieter, more efficient braking system
Restores brakes to like-new performance
Corrosion resistant coating for long-lasting durability against harsh roads

from

$8.29

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$19.99

An axle disc hardware kit with metal components used to service the pad in the caliper. Replace weak or broken clips to reduce noise and lining travel.

from

$4.49

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

Top-Rated Brake Parts Brands For Your 1988 Pontiac 6000

Shop for the best-rated brands offering Brake Parts and other products for your 1988 Pontiac 6000s. Below you’ll find some of our best rated Brake Parts from Dorman, Carquest, and Carquest Premium, and more. Brake Parts from these brands that fit a 1988 6000 start at just $1.29 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 1988 Pontiac 6000 Brake Parts

When it comes to maintaining or upgrading your 1988 Pontiac 6000, using quality Brake Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Brake Parts, specifically designed for the 1988 Pontiac 6000. With over 10 Dorman brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.29, with an average price of just $7.75. Plus, with over 74 customer reviews and an average rating of 4 stars, you can trust that our Dorman Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$3.99

This product is not rated

Banjo Bolt M10-1.5 X 23

“”

from
$21.49

This product is not rated

Parking Brake Cable Equalizer

“”

from
$4.49

This product is not rated

Body Bolt – M6-1.0 X 25mm

“”

Popular Carquest 1988 Pontiac 6000 Brake Parts

Carquest auto parts is one of the highest quality Brake Part brands in the market. Any 1988 Pontiac 6000 owner should feel confident when installing genuine Carquest parts in their vehicle. To ensure the best fit and performance for your 1988 6000, Advance Auto Parts carries a full inventory of 34 Carquest Brake Parts. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Carquest Brake Parts range from $1.99 to $63.99, plus, with more than 298 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.

from
$31.05

This product is not rated

A/C Compressor Clutch Relay Connector

“”

from
$10.99

This product is not rated

Disc Brake Caliper Guide Pin Kit

“”

from
$11.49

This product is not rated

Brake Hydraulic Banjo Bolt

“”

FAQs for 1988 Pontiac 6000 Brake Parts

Which Brake Parts are best-sellers for 1988 Pontiac 6000s?

Out of 73 Brake Parts that fit 1988 Pontiac 6000s, the following parts are the top sellers:

Body Bolt – M6-1.0 X 25mm (11910833) – $4.49
Brake Hose Bolts M10-1.5 X 22.8mm (5012759) – $8.49
Brake Hose Washer – Id 10.3mm, Od 16.91mm, Thickness 1.2mm (5706386) – $5.99

What’s the price range for 1988 Pontiac 6000 Brake Parts?

Brake Part prices for the 1988 Pontiac 6000 start at $1.29 and go up to $77.10 for the most premium parts.

What’s the average price of a Brake Part for a 1988 Pontiac 6000?

The average price for Brake Parts for the 1988 Pontiac 6000 is $25.22. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Pontiac 6000 model years?

Yes, we currently carry Brake Parts for 9 model years of Pontiac 6000s between 1982 and 1991. Brake Parts are bought most frequently for the following model years: 1991, 1990, 1989, 1987, 1986, 1985, 1984, 1983, and 1982.

What are the cheapest Brake Parts for my 1988 Pontiac 6000?

The cheapest 1988 Pontiac 6000 Brake Parts we carry in stock are:

Body Bolt With Washer – M6-1.0 X 25mm (Sold by each) (22141637) – $1.29
Inlet Bolt (sold by each) (10863799) – $1.99
Banjo Bolt Washer 10.3mm X 16.9mm (22972282) – $2.29
Parking Brake Adjusting Lever Spring (18310082) – $2.49
Drum Brake C Washer (5311640) – $2.49

What are the top-rated Brake Parts that fit the 1988 Pontiac 6000?

Out of 2,730 reviews by customers, our 1988 Pontiac 6000 Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1988 Pontiac 6000 and their top-rated products:

Wheel Cylinders
- WHEEL CYLINDER (3640507) – $16.99
Brake Rotors and Drums
- WHEEL CYLINDER (3640507) – $16.99

What types of Brake Parts do you sell for my 1988 Pontiac 6000?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1988 Pontiac 6000:

Can I get help with 1988 Pontiac 6000 Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Brake Parts and more.

What is your return policy for Pontiac 6000 Brake Parts?

Advance Auto Parts keeps returns simple. For new Pontiac 6000 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1988 Pontiac 6000 Brake Parts

Carquest Wearever – Brake Hose Assembly: Gaskets Included (Part No.BHA38271)

Wearever – Remanufactured Brake Master Cylinder (Part No.10-1925)

ACDelco – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT110)

WBR – Disc Brake Hardware Pro-Kit (Part No.N1061461297WBR)

Carquest Wearever – Brake Hold-Down Spring Cup (Part No.1133-2)

ACDelco – Power Brake Booster Vacuum Check Valve Kit with Check Valve and Grommet (Part No.179-1266)

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41071)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5033)

Carquest – Back Up Light Connector (Part No.PT343)

Carquest Wearever – Brake Drum Meets or Exceeds OE Specs (Part No.YH140426)

WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000191474WBC)

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4130)

Carquest Premium – Multi Purpose Relay (Part No.RAA1243)

Carquest Wearever – Disc Brake Anti-Rattle Clip (Part No.5418-2)

ACDelco – 1-Way Male Gray Multi-Purpose Pigtail (Part No.PT308)

Dorman – Help – Brake Line Retaining Clips (Part No.13987)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-289)

Carquest Wearever – Disc Brake Hardware Kit (Part No.5201-2)

Dorman – Help – Master Cylinder Caps (Part No.42042)

NTK – Brake Fluid Level Sensor (Part No.BF0001)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD378)

Carquest Premium – Parking Brake Switch (Part No.SBA4471)

Carquest Wearever – Brake Hold-Down Spring (Part No.1150-2)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37535)

Dorman – Banjo Bolt Washer 10.3mm X 16.9mm (Part No.484-180.1)

Carquest Wearever – Parking Brake Cable (Part No.BCA93745)

Dorman – Help – Parking Brake Cable Equalizer (Part No.21121)

Dorman – Body Bolt – M6-1.0 X 25mm (Part No.963-232D)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38178)

Dorman – Help – Brake Hose Bolts M10-1.5 X 22.8mm (Part No.13940)

Dorman – Help – Brake Hose Washer – Id 10.3mm, Od 16.91mm, Thickness 1.2mm (Part No.66223)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA106343)

Dorman – Help – Brake Line Retaining Clips (Part No.13987)

Dorman – Banjo Bolt M10-1.5 X 23 (Part No.484-205.1)

Dorman – Banjo Bolt Washer 10.3mm X 16.9mm (Part No.484-180.1)

Carquest Wearever – Brake Hydraulic Banjo Bolt (Part No.H9458)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA106345)

ACDelco – Professional DuraStop Hydraulic Brake Hose Assembly (Part No.N7000578039ACD)

Carquest Wearever – Brake Hose Assembly: Gaskets Included (Part No.BHA380994)

Carquest Wearever – Brake Hose Assembly: Gaskets Included (Part No.BHA118427)

Carquest Wearever – Inlet Bolt (sold by each) (Part No.301H5375)

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4195)

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4194)

Carquest Wearever – Disc Brake Hardware Kit (Part No.5201-2)

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5033)

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4130)

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4131)

Carquest Wearever – Brake Shoes (Part No.S552)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD215)

Carquest Premium Gold – Brake Pads: Semi-metallic, Long Life and Quiet (Part No.GMKD215)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD289)

World Brake Resources – Ceramic Brake Pads (Part No.N1010417738WBR)

TRW – Automotive Premium Metallic Brake Pads (Part No.N1010921820TRW)

Bosch – QuietCast Premium Brake Pads – w/ Hardware and Shims (Part No.N1010441201BOS)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-215)

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-289)

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-289)

Carquest Wearever – Brake Drum Meets or Exceeds OE Specs (Part No.YH140426)

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH141263)

ACDelco – Advantage Brake Drum (Part No.N2000593886ACD)

WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000191474WBC)

Carquest Wearever – Drum Brake Hardware Kit (Part No.7061)

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41071)

Wagner – Disc Brake Hardware Align Kit (Part No.H5575)

Economy Black – Disc Brake Caliper Repair Kit (Part No.41087)