1988 Nissan Maxima Body Parts

Name: Hood Lift Support: 15.31" Ext Length, 4.48" Travel, 85 Lbs of Force, 1 Pk
Brand: StrongArm
SKU: E4524
Price: 16.49 USD
Rating: 4.5 (22 reviews)

Below you will find various in-demand Nissan Body Parts, components and accessories for your 1988 Maxima. Advance Auto Parts has popular Maxima parts like Convertible Components, Bodies and Fender Parts, Vehicle Hoods and more. You’ll also find aftermarket and OEM Body Parts for other Maxima model years including 2014, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1988 Nissan Maxima Body Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1988 Nissan Maxima Body Parts Categories

Lift Supports

Convertible Top Relays

Fender Splash Shields

Mirror Replacement Glass

Door Jamb Switches

Front End Covers

Essential Body Parts for 1988 Nissan Maximas

from

$16.49

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$14.99

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$37.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable.
No Special Tools Required.
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance.
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function.
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable.
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal.
Trilingual Install Instructions provided inside each package

from

$27.49

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$49.99

Embark on a clearer, safer driving journey with the Burco 6119 replacement side view mirror, expertly crafted for Nissan Maxima and Nissan Stanza models. This economical side mirror option is not just a cost-saving solution, but also a DIY-friendly project that anyone can tackle. Forget about being a car whiz; with straightforward instructions, you¿ll have that broken mirror replaced in no time! The glass-only design meets safety standards, ensuring you can see everything you need while on the road. Say farewell to obstructed views and embrace enhanced visibility. For those seeking the best replacement side mirror, the Burco 6119 is your reliable partner in maintaining safety and peace of mind while driving.

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$27.99

Replacement Mirror Glass Assembly. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Replace your cracked or broken driver side Mirror glass at a fraction of the dealer cost
Original equipment quality, fit and function
Includes Backing Plate
Step-by-step instructions for easy installation

from

$149.99

Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.

Product Features:

Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles
Seamless design – precisely cut to match the shape and look of the factory glass
Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
Easy installation – follow simple step-by-step procedure to swap out existing glass

from

$39.99

Dive into a safer driving experience with the Burco 4277 replacement car mirror, specially crafted for Nissan Maxima vehicles. This side view mirror seamlessly combines quality and affordability, ensuring that you can enhance your visibility without breaking the bank. Featuring a glass-only design, it allows for a quick and easy installation that¿s perfect for anyone looking to tackle car repairs themselves, saving both time and money. Meeting essential safety compliance standards, the Burco 4277 guarantees you won’t compromise on quality. Say farewell to shattered reflections and welcome clear views, all while enjoying peace of mind on the road. With the Burco 4277 side view mirror, you¿re not only upgrading your vehicle¿s safety but also its appearance¿making this a smart, economical choice for any Maxima owner!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$32.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$17.99

The Door Jamb Switch is typically mounted to the body pillar where the door frame will come into close contact when the door is closed. The door jamb switch input is used to control the interior lights but may also be used as an input for many courtesy features that vehicles may have.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$12.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Jam Switch detects whether a vehicle door is open or closed, enhancing safety by triggering interior lights and warning systems to prevent accidents or potential damage while driving. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$25.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$159.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$65.99

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$159.99

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$159.99

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$65.99

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$65.99

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$159.99

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$65.99

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$4.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for Length-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$46.99

New Standard Replacement Passenger Side Fender Liner

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$9.99

New Standard Replacement Driver Side Engine Splash Shield, (On Side Of Engine Compartment)

Product Features:

On Side Of Engine Compartment, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$89.99

New CAPA Certified Standard Replacement Driver Side Fender Liner/Splash Shield

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$88.99

New CAPA Certified Standard Replacement Passenger Side Fender Splash Shield

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$3.29

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

Upgrade your 1988 Nissan Maxima with Top-Quality Body Parts

When it comes to maintaining or upgrading your 1988 Nissan Maxima, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Body Parts are key to keeping your Maxima functioning at its best. At Advance Auto Parts, we offer a wide selection of 9 Body Parts for the 1988 Nissan Maxima, designed to meet your needs without breaking the bank. From Convertible Component replacements to Bodies and Fender Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1988 Nissan Maxima at great prices. Our Body Parts inventory for this model ranges from just $4.29 to $159.99, with an average price of $43.47. Our 9 Body Parts in stock come from 6 trusted brands, so you’re sure to find the right part for your 1988 Nissan Maxima without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1988 Nissan Maxima is always ready to roll. We’re committed to providing you with everything you need to keep your Maxima in top shape, all in one place. Start shopping confidently below for your 1988 Nissan Maxima!

Best-Selling Convertible Components for 1988 Nissan Maximas

Enhance the driving experience in your Nissan with 1 quality Convertible Component components, starting at $32.99.

show more show less

from

$32.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Top Picks for 1988 Nissan Maxima Vehicle Hoods

Upgrade Nissan Maximas with top-quality Vehicle Hoods parts, including 1 OEM and aftermarket selections for your 1988 model.

show more show less

from

$37.99

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable.
No Special Tools Required.
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance.
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function.
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable.
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal.
Trilingual Install Instructions provided inside each package

In-Demand Vehicle Doors for 1988 Nissan Maximas

Select from 1 premium Vehicle Doors parts for your 1988 Nissan Maxima.

show more show less

from

$17.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Most Sold 1988 Nissan Maxima Vehicle Mirrors

Explore our best-selling Nissan parts for the 1988 Maxima among 2 OEM and aftermarket options starting from $26.99.

show more show less

from

$39.99

Enhance your driving experience with the Burco 2559 replacement car mirror, designed specifically for Nissan Maxima, Nissan Pulsar NX, Nissan Sentra, Nissan Stanza, and INFINITI M30 owners. This side view mirror replacement is your go-to solution for improving safety and visibility on the road. With a focus on quick and easy installation, you won¿t have to navigate complicated setups to get back on track. The Burco 2559 offers an economical way to replace your broken mirror while meeting all safety compliance standards, ensuring you drive with confidence. Featuring high-quality glass, it guarantees crystal-clear visibility in various conditions. Whether you need a repair mirror or a straightforward side mirror glass replacement, the Burco 2559 is the smart choice for maintaining your vehicle’s functionality and safety. Don¿t settle for anything less than reliable visibility; choose the Burco 2559 and drive with assurance!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$26.99

Prepare for a journey with the Burco 3151 replacement car mirror, expertly crafted to boost the safety and visibility of your Nissan Maxima, Nissan Pulsar NX, Nissan Sentra, Nissan Stanza, and INFINITI M30. This glass-only side view mirror offers a cost-effective solution for your mirror replacement needs, ensuring you don¿t break the bank while enhancing your vehicle’s functionality. Installation is a breeze, allowing you to hit the road without the usual hassle associated with repairs. Say goodbye to the irritation of a cracked mirror and enjoy a seamless replacement that complies with safety standards. With the Burco 3151, you’re not just swapping out a mirror; you’re investing in a clearer view and a safer driving experience. Trust in Burco¿s precision and reliability, making it the ideal choice for all your automotive mirror replacement needs. Don¿t let a broken mirror hold you back¿choose the Burco 3151 and drive with confidence!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

FAQs for 1988 Nissan Maxima Body Parts

Which Body Parts are best-sellers for 1988 Nissan Maximas?

Out of 9 Body Parts that fit 1988 Nissan Maximas, the following parts are the top sellers:

Multi-Purpose Relay (12458878) – $32.99
Bumper Retainer Head Dia. 0.76 In. Shank Length 0.82 In. Hole Dia. 0.31 In. (11077190) – $4.29
Fender Liner Retainer (11910792) – $4.99

What’s the price range for 1988 Nissan Maxima Body Parts?

Body Part prices for the 1988 Nissan Maxima start at $4.29 and go up to $159.99 for the most premium parts.

What’s the average price of a Body Part for a 1988 Nissan Maxima?

The average price for Body Parts for the 1988 Nissan Maxima is $43.47. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Nissan Maxima model years?

Yes, we currently carry Body Parts for 40 model years of Nissan Maximas between 1981 and 2023. Body Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2014.

What are the cheapest Body Parts for my 1988 Nissan Maxima?

The cheapest 1988 Nissan Maxima Body Parts we carry in stock are:

Bumper Retainer Head Dia. 0.76 In. Shank Length 0.82 In. Hole Dia. 0.31 In. (11077190) – $4.29
Fender Liner Retainer (11910792) – $4.99
Door Jamb Switch (12522259) – $17.99
SIDE VIEW MIRROR (12486738) – $26.99
Multi-Purpose Relay (12458878) – $32.99

What types of Body Parts do you sell for my 1988 Nissan Maxima?

As of 3/1/26, these are some of the most in-demand types of Body Parts for a 1988 Nissan Maxima:

Can I get help with 1988 Nissan Maxima Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Body Parts and more.

What is your return policy for Nissan Maxima Body Parts?

Advance Auto Parts keeps returns simple. For new Nissan Maxima Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1988 Nissan Maxima Body Parts

StrongArm – Hood Lift Support: 15.31" Ext Length, 4.48" Travel, 85 Lbs of Force, 1 Pk (Part No.E4524)

StrongArm – Trunk Lift Support: 9.0" Ext Length, 2.25" Travel, 79 Lbs of Force, 1 Pk (Part No.F4078)

Atlas Lift – Lift Support (Part No.LS11373)

StrongArm – Hood Lift Support: 15.27" Ext Length, 4.45" Travel, 84 Lbs of Force, 1 Pk (Part No.E4162)

Burco – SIDE VIEW MIRROR (Part No.6119)

K-Source – Passenger Car Replacement Mirror: Driver Side, Flat, Includes Backing Plate (Part No.88286)

Dorman – Help – Plastic Backed Door Mirror Glass (Part No.56543)

Burco – SIDE VIEW MIRROR (Part No.4277)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1264)

Carquest Premium – Door Jamb Switch (Part No.SBA3537)

Carquest Premium – Door Jamb Switch (Part No.SBA1291)

Carquest Premium – Door Jamb Switch (Part No.SAA1342)

Le Bra – Front End Cover (Part No.55799-01)

Covercraft – Custom Hood Protector (Part No.45630-01)

Le Bra – Front End Cover (Part No.55672-01)

Le Bra – Custom Front End Cover (Part No.551102-01)

Covercraft – Custom Hood Protector (Part No.45633-01)

Covercraft – Custom Hood Protector (Part No.45634-01)

Le Bra – Front End Cover (Part No.55158-01)

Covercraft – Custom Hood Protector (Part No.45622-01)

Dorman – Bumper Retainer Head Dia. 0.76 In. Shank Length 0.82 In. Hole Dia. 0.31 In. (Part No.963-637)

Dorman – Fender Liner Retainer (Part No.961-303D)

KAI – Fender Splash Shield (Part No.NI1251115)

KAI – Fender Splash Shield (Part No.NI1250141)

KAI – Fender Splash Shield (Part No.NI1250115C)

Dorman – Splash Shield Retainer (Part No.961-041D)

KAI – Fender Splash Shield (Part No.NI1251115C)

Dorman – Metal Splash Shield Hardware (Part No.66000)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1264)

Dorman – Bumper Retainer Head Dia. 0.76 In. Shank Length 0.82 In. Hole Dia. 0.31 In. (Part No.963-637)

Dorman – Fender Liner Retainer (Part No.961-303D)

Le Bra – Front End Cover (Part No.55188-01)

Covercraft – Custom Hood Protector (Part No.45628-01)

Atlas Lift – Lift Support (Part No.LS11373)

Carquest Premium – Door Jamb Switch (Part No.SBA3537)

Burco – SIDE VIEW MIRROR (Part No.2559)

Burco – SIDE VIEW MIRROR (Part No.3151)