1988 Jeep Wagoneer Universal Joints
More 1988 Jeep Wagoneer Universal Joints
Find your specific 1988 Jeep Wagoneer original or aftermarket Universal Joints below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1988 Jeep Wagoneer Universal Joints
Crown Auto Jeep Replacmnt – For Use With Front Or Rear Yokes, Hex Head Bolt (Part No.4006698K)
from
$9.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Crown Auto Jeep Replacmnt – For Use With Front Or Rear Yokes, 12 Point Bolt (Part No.4006928K)
from
$9.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size (Part No.41026)
from
$179.99
Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1350 u-joint size
- 3.625″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Crown Auto Jeep Replacmnt – Used To Convert Dana 35 Strap Type Yoke To U Bolt Style, With Pinion Flange (Part No.D35YOKEUBK)
from
$80.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Convert assembly to strong u-bolt style
- Designed to work with 3.219″ Wide U-Joints
- Includes: Yoke, Pinion Seal, U-bolts, and pinion nut
- Contains all hardware needed for installation
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
MOOG Driveline Products – Double Cardan CV Centering Yoke (Part No.607)
from
$109.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Machined bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
- Rust preventative added for longer shelf life
Dorman – Help – U-Joint Repair Kit (Part No.81018)
from
$6.99
This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit (Part No.41193)
from
$17.99
U/joint strap kit, 10.25″, 9.5″, Dana 60, Dana 70, 1350 & 1410.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Ford 10.25″, GM 9.5″, Dana Spicer 60, 70, 70U and 70HD
- 1350 and 1410 u-joint size
- Includes two straps and four bolts
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
MOOG Driveline Products – Universal Joint Strap Kit (Part No.318-10)
from
$14.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 315G, 317, 319 & 457
- Contains two 1-1/2″ bolt center clamps and four 1/4-28 x 5/8″ cap screws
Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)
from
$31.99
Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 60, 70, 70U, 70HD and 80
- 1480 u-joint size
- Includes two straps and four bolts
Yukon Gear – (4) Full Circle Snap Rings, Fit 297X U-Joint With Aftermarket Axle (Part No.32084)
from
$19.99
(4) Full Circle snap rings, fit 297X U-joint with aftermarket axle.
Product Features:
See More
Product Features:
- Set of four full circle snap rings for Dana Spicer 30 and 44 and GM 8.5″ front
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.317)
from
$26.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.371)
from
$24.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Driveworks – Universal Joint (Part No.DW-371)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Neapco – Universal Joint (Part No.1-0278)
Driveworks – Universal Joint (Part No.DW-365)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Neapco – Universal Joint (Part No.1-0297)
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.315G)
from
$28.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Yukon Gear – Chrome Moly Superjoint Kit, Replacement For Dana 30, Dana 44 & GM 8.5" (Part No.32083)
from
$609.99
Yukon Chrome-Moly Super Joint kit for Dana 30, Dana 44 & GM 8.5″ front. Kit includes (2) 4340 Chrome Moly Super-joints, grease, and Gun.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44 and GM 8.5″ front
- 4340 Chromoly cross
- Eliminated needle bearings results in larger trunion for added strength
- Uses ultra high grade antiseize for lubrication
- Not recommended for daily driven use
- Two complete joints, eight full circle snap rings, grease and grease gun
Dorman – Help – U-Joint Bolt Kit (Part No.81008)
from
$6.69
This universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)
from
$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits 1350 and 1410 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)
from
$15.99
1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1330 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.329-10)
from
$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 353, 354, 361, 369 & 497
- Fits 1-1/16″ bearings
Popular 1988 Jeep Wagoneer Universal Joints Categories
1988 Jeep Wagoneer Universal Joints
Maybe you’re in the middle of a full rebuild of that 1988 Jeep Wagoneer. Maybe you just need a couple of Universal Joints. Either way, Advance Auto Parts has 45 different Universal Joints in our inventory ranging from $4.49 to $609.99. That means you can find the exact parts or products you need to keep that 1988 Jeep Wagoneer running smoothly.
Universal Joints are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Jeep Wagoneer. Moog, Driveworks, and Spicer are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Universal Joints for your 1988 Jeep Wagoneer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 260 reviews in this category, some of the top rated parts include Universal Joint with 3.9 stars and Universal Joint with 4.8 stars.
So if you’re in the market for aftermarket Universal Joints to keep your 1988 Jeep Wagoneer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Universal Joints Brands To Make Your 1988 Jeep Wagoneer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Jeep Wagoneer demands trusted brand parts and products to keep it running. Many trusted brands of Universal Joints make up Advance Auto Parts’ inventory, and all are ready to help make your Wagoneer the best it can be. Be sure to browse some of our top Universal Joints brands and parts.
Popular MOOG Driveline Products Universal Joints
We carry MOOG Driveline Products parts in our stock across U-Joints and U-Joint Strap Kits categories, plus more. For a 1988 Jeep Wagoneer, our most popular MOOG Driveline Products Universal Joints include:
Top 1988 Jeep Wagoneer Universal Joints from MOOG Driveline Products
MOOG Driveline Products products are another trusted brand when it comes to Universal Joints for your 1988 Jeep Wagoneer. Popular MOOG Driveline Products parts include:
FAQs for 1988 Jeep Wagoneer Universal Joints
What are the most purchased Universal Joints for the 1988 Jeep Wagoneer?
Out of 45 Universal Joints for the 1988 Jeep Wagoneer, the most popular in our inventory are:
What are the top-rated 1988 Jeep Wagoneer Universal Joints?
Top-rated Universal Joints for your 1988 Jeep Wagoneer based on customer reviews/ratings are:
from
$7.89
(7)
Universal Joint
“i never worked on front axle u-joints before. getting the old ones out was a real project,but installing these was a snap. they fit my 97 dodge ram pe”
