1988 Jaguar XJ6 Brake Parts
Find Your Specific 1988 Jaguar XJ6 Brake Parts
Below you will find various in-demand Jaguar Brake Parts, components and accessories for your 1988 XJ6. Advance Auto Parts has popular XJ6 parts like Brake Pads and Shoes Brake Kits and more. You’ll also find aftermarket and OEM Brake Parts for other XJ6 model years including
1989,
1990,
1991,
1992,
1993,
1994,
1995,
1996,
1997 and more. Select a category of 1988 Jaguar XJ6 Brake Parts below and start saving instantly.
Popular 1988 Jaguar XJ6 Brake Parts Categories
Essential Brake Parts for 1988 Jaguar XJ6s
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD517)
from
$22.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Singler layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
TRW – Automotive OE Replacement Brake Pads (Part No.N101037319TRW)
from
$45.26
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.
Product Features:
See More
Product Features:
- Include the OE specified shims.
- Low noise and reduced vibrations.
- Formulated to OE Specifications.
- Superior friction qualities.
- Organic blended compound.
Ferodo – Premier OE Replacement Brake Pads (Part No.N101037319FER)
from
$96.15
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Vehicle-specific friction material formulations deliver ultimate control, with minimal stopping distances. Shims and chamfers keep noise levels down while maintaining top performance. Extra durability and reduced wear is achieved by exactly matching our friction material formulation to the vehicle application type. A specially-designed thermal underlayer ensures outstanding heat dissipation, reducing the possibility of brake fade. Every Ferodo brake pad comes with all the necessary OE-matched accessories for installation. All Ferodo pads are R90 compliant and go through extensive research, laboratory and road testing to achieve OE manufacturer standards. Your brake pads will be ready to perform, which means they reach maximum efficiency after just one or two brake applications and perform consistently under all temperatures and conditions.
Product Features:
See More
Product Features:
- Friction materials are matched to vehicle braking systems
- Exceeds Regulation 90 specification
- Full ABS compatibility (also TCS, EBD. ASC etc.)
- Resistance to brake fade from -30C to 700C
- Designed to minimize brake noise
- Minimum bedding-in period
- Reduced disc wear
- Excellent fade resistance and water recovery characteristics
- Fitted as original equipment
- Safety critical accessories included
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD586)
from
$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Singler layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
TRW – Automotive OE Replacement Brake Pads (Part No.N101037347TRW)
from
$68.47
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.
Product Features:
See More
Product Features:
- Include the OE specified shims.
- Low noise and reduced vibrations.
- Formulated to OE Specifications.
- Superior friction qualities.
- Organic blended compound.
Akebono – EURO Ceramic Ultra-Premium Brake Pads (Part No.N1010268658AKE)
from
$101.98
Akebono EURO® Ultra-Premium ceramic brake pads provide exactly the ideal vehicle control and performance response intended by the manufacturers of European makes. Maintain the enhanced pedal feel of European braking performance with brake pads and friction formulas engineered specifically for your vehicle and manufactured in the USA. Brake Pads That Ensure Optimal Responsiveness and Cleaner Wheels European car owners across North America now have a brake pad solution that will keep their wheels virtually free from dust and provide the European stopping power they expect. The use of our exclusive, highly advanced ceramic brake pad technology means that Akebono’s EURO Ultra-Premium brake pads provide excellent stopping power while extending rotor life and virtually eliminating brake dust, so the wheels on your European vehicle will remain their cleanest. In addition, Akebono EURO Ultra-Premium ceramic brake pads control noise, vibration, and harshness (NVH) and help ensure longer rotor life. They are the ultimate upgrade for semi-metallic and low-metallic brake pads. Akebono: The Industry Standard for European Manufacturers For over two decades, Akebono Ceramic Technology® (ACT) has been standard on many of North America’s passenger cars, light trucks, and SUVs and has set the benchmark for ceramic pads used in OE vehicle production. Now European manufacturers request Akebono brake products, and we can deliver that level of reliability to your replacement brake pads. Akebono manufactures replacement disc pads that contain the same materials, engineering, quality standards, and advanced technologies used to create our original ceramic brake pads. The use of Akebono ceramic brake pads ensures customer satisfaction and eliminates unnecessary return visits to the shop.
Product Features:
See More
Product Features:
- Ultimate upgrade for OE semi-metallic, organic and low-metallic brake pads
- Ultra-Quiet – controls noise, vibration and harshness level
- European braking performance with enhanced pedal feel
- Extremely rotor friendly for longer rotor life
- Friction formulas specially designed for European vehicles
TRW – Automotive OE Replacement Brake Pads (Part No.N101037344TRW)
from
$64.79
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.
Product Features:
See More
Product Features:
- Include the OE specified shims.
- Low noise and reduced vibrations.
- Formulated to OE Specifications.
- Superior friction qualities.
- Organic blended compound.
Carquest Wearever – Disc Brake Hardware Kit (Part No.H5796)
from
$13.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- New Brake Hardware prevents premature wear and maximizes performance
- Helps deliver a quieter, more efficient braking system
WBR – Disc Brake Hardware Pro-Kit (Part No.N1061460561WBR)
from
$8.87
New Brake Hardware – Back to like-new performance The WBR complete disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal like new operating condition. Disc hardware can lose 50% of spring tension within 1-2 years, which can cause pads to stick, create uneven pad wear, and lead to unwanted brake noise.
Product Features:
See More
Product Features:
- Reduced Brake Noise, comebacks and unsatisfied customers,
- Extends the life of a brake job,
- Improved fuel mileage, and
- Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
- reduce effective braking force
- cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
- cause excessive caliper movement
- cause unwanted noise like rattles and thumps.
WBR – Disc Brake Hardware Pro-Kit (Part No.N1061460544WBR)
from
$6.72
New Brake Hardware – Back to like-new performance The WBR complete disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal like new operating condition. Disc hardware can lose 50% of spring tension within 1-2 years, which can cause pads to stick, create uneven pad wear, and lead to unwanted brake noise.
Product Features:
See More
Product Features:
- Reduced Brake Noise, comebacks and unsatisfied customers,
- Extends the life of a brake job,
- Improved fuel mileage, and
- Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
- reduce effective braking force
- cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
- cause excessive caliper movement
- cause unwanted noise like rattles and thumps.
Carquest Wearever – Disc Brake Hardware Kit (Part No.13119)
from
$4.29
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- New Brake Hardware prevents premature wear and maximizes performance
- Helps deliver a quieter, more efficient braking system
- Manufactured with quality materials to suppress high stress levels
Carquest Wearever – Disc Brake Hardware Kit (Part No.15565A)
from
$7.29
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- Helps deliver a quieter, more efficient braking system
- Low-friction PTFE coating to reduce drag
- Manufactured with quality materials to suppress high stress levels
Carquest Wearever – Disc Brake Hardware Kit (Part No.5490A)
from
$5.79
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- Helps deliver a quieter, more efficient braking system
- Low-friction PTFE coating to reduce drag
- Manufactured with quality materials to suppress high stress levels
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD9)
from
$17.79
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
Beck/Arnley – Original Equipment Brake Pads (Part No.089-1380)
from
$69.99
Specially developed for each application. Sourced from OE approved suppliers based on the specific application. For the enthusiast who wants to maintain the OE braking performance.
See More
Hawk Performance – Disc Brake Pad (Part No.HB135F.642)
from
$156.99
Disc Brake Pad
Carquest Premium Gold – Brake Pads: Semi-metallic, Long Life and Quiet (Part No.GMKD394A)
from
$52.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.
Product Features:
See More
Product Features:
- Application-specific friction formulations provide shorter stopping distances and extended pad life
- Hardware included for most applications
- OE-designed slots and chamfers to reduce noise and vibration
- Multi-layer shim provides near silent braking
- Powder-coated backing plate prevents corrosion
Ferodo – Premier OE Replacement Brake Pads (Part No.N101037317FER)
from
$131.58
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Vehicle-specific friction material formulations deliver ultimate control, with minimal stopping distances. Shims and chamfers keep noise levels down while maintaining top performance. Extra durability and reduced wear is achieved by exactly matching our friction material formulation to the vehicle application type. A specially-designed thermal underlayer ensures outstanding heat dissipation, reducing the possibility of brake fade. Every Ferodo brake pad comes with all the necessary OE-matched accessories for installation. All Ferodo pads are R90 compliant and go through extensive research, laboratory and road testing to achieve OE manufacturer standards. Your brake pads will be ready to perform, which means they reach maximum efficiency after just one or two brake applications and perform consistently under all temperatures and conditions.
Product Features:
See More
Product Features:
- Friction materials are matched to vehicle braking systems
- Exceeds Regulation 90 specification
- Full ABS compatibility (also TCS, EBD. ASC etc.)
- Resistance to brake fade from -30C to 700C
- Designed to minimize brake noise
- Minimum bedding-in period
- Reduced disc wear
- Excellent fade resistance and water recovery characteristics
- Fitted as original equipment
- Safety critical accessories included
Mintex – OE Replacement Brake Pads (Part No.N1010442460MIN)
from
$77.12
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Mintex brake pads are developed and engineered to meet a significant demand for cost-effective braking solutions that deliver the optimum balance between performance and extended service life, by providing quality products at affordable prices. The Mintex Friction aftermarket development and manufacturing process follows an identical path to the O.E. product, using the same materials and formulations from the same friction formulation portfolio, as well as the valuable experience gained from initial development of the O.E. product. The result is superior quality replacement products for the aftermarket in a much quicker time and with the confidence that the products will deliver high levels of quality and performance. Developed and engineered to set new standards in aftermarket friction, Mintex brake pads provide the optimum balance of performance and extended service life.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct Fit application.
- Specifically engineered to meet the OE braking requirements
- Ceramic and metallic blended compound.
- Low noise and reduced vibrations.
- Shimmed, chamfered, and slotted to match O.E. design
- Superior friction qualities.
PBR – Deluxe Ceramic Brake Pads (Part No.N101027084PBR)
from
$136.75
The PBR Deluxe brake pads are manufactured with a mild ceramic compound that provides outstanding stopping power with very low fade. These pads are formulated from the latest premium quality materials and are known for their extremely low dust and long life. The PBR Deluxe pads provide extremely quiet braking, proven long pad and rotor life, reduced disc scoring, consistent smooth braking performance and are considered a great alternative to the factory brake pads. Driving Styles: Standard city and freeway braking – Frequent stop and go conditions.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct Fit application.
- Superior friction qualities.
- Ceramic materials
- Shimmed where recommended by engineering
- Application specific formulations
- Provides exceptionally long pad and rotor life, and resistance to heat
- Low noise, minimal brake dust
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD4)
from
$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
Autopart International Inc – Brake Pad Set (Part No.N10102964942API)
from
$45.69
Brake Pad Set
Akebono – EURO Ceramic Ultra-Premium Brake Pads (Part No.N1010268623AKE)
from
$129.81
Akebono EURO® Ultra-Premium ceramic brake pads provide exactly the ideal vehicle control and performance response intended by the manufacturers of European makes. Maintain the enhanced pedal feel of European braking performance with brake pads and friction formulas engineered specifically for your vehicle and manufactured in the USA. Brake Pads That Ensure Optimal Responsiveness and Cleaner Wheels European car owners across North America now have a brake pad solution that will keep their wheels virtually free from dust and provide the European stopping power they expect. The use of our exclusive, highly advanced ceramic brake pad technology means that Akebono’s EURO Ultra-Premium brake pads provide excellent stopping power while extending rotor life and virtually eliminating brake dust, so the wheels on your European vehicle will remain their cleanest. In addition, Akebono EURO Ultra-Premium ceramic brake pads control noise, vibration, and harshness (NVH) and help ensure longer rotor life. They are the ultimate upgrade for semi-metallic and low-metallic brake pads. Akebono: The Industry Standard for European Manufacturers For over two decades, Akebono Ceramic Technology® (ACT) has been standard on many of North America’s passenger cars, light trucks, and SUVs and has set the benchmark for ceramic pads used in OE vehicle production. Now European manufacturers request Akebono brake products, and we can deliver that level of reliability to your replacement brake pads. Akebono manufactures replacement disc pads that contain the same materials, engineering, quality standards, and advanced technologies used to create our original ceramic brake pads. The use of Akebono ceramic brake pads ensures customer satisfaction and eliminates unnecessary return visits to the shop.
Product Features:
See More
Product Features:
- Ultimate upgrade for OE semi-metallic, organic and low-metallic brake pads
- Ultra-Quiet – controls noise, vibration and harshness level
- European braking performance with enhanced pedal feel
- Extremely rotor friendly for longer rotor life
- Friction formulas specially designed for European vehicles
TRW – Automotive OE Replacement Brake Pads (Part No.N1010442460TRW)
from
$100.95
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.
Product Features:
See More
Product Features:
- Include the OE specified shims.
- Low noise and reduced vibrations.
- Formulated to OE Specifications.
- Superior friction qualities.
- Organic blended compound.
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD407)
from
$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Singler layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Upgrade your 1988 Jaguar XJ6 with Top-Quality Brake Parts
When it comes to maintaining or upgrading your 1988 Jaguar XJ6, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jaguar or enhancing its overall performance, Brake Parts are key to keeping your XJ6 functioning at its best. At Advance Auto Parts, we offer a wide selection of 6 Brake Parts for the 1988 Jaguar XJ6, designed to meet your needs without breaking the bank.
From
Brake Pads and Shoe
replacements to
Brake Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1988 Jaguar XJ6 at great prices.
Our Brake Parts inventory for this model
ranges from just $4.29 to $136.75, with
an average price of $41.09.
Our 6 Brake Parts in stock come from 4 trusted brands, so you’re sure to find the right part for your 1988 Jaguar XJ6 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1988 Jaguar XJ6, we stock popular OEM and aftermarket Brake Parts from top names
like PBR, and more.
PBR Brake Parts
start at just $136.75 and boast an impressive 5 stars average rating from customers.
With 14 customer reviews and counting, our 1988 Jaguar XJ6 Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1988 Jaguar XJ6 is always ready to roll. We’re committed to providing you with everything you need to keep your XJ6 in top shape, all in one place.
Start shopping confidently below for your 1988 Jaguar XJ6!
Best-Selling Brake Pads and Shoes for 1988 Jaguar XJ6s
Enhance the driving experience in your Jaguar with 4 quality Brake Pads and Shoe components, starting at $15.00.
PBR – Deluxe Ceramic Brake Pads (Part No.N101027084PBR)
from
$136.75
The PBR Deluxe brake pads are manufactured with a mild ceramic compound that provides outstanding stopping power with very low fade. These pads are formulated from the latest premium quality materials and are known for their extremely low dust and long life. The PBR Deluxe pads provide extremely quiet braking, proven long pad and rotor life, reduced disc scoring, consistent smooth braking performance and are considered a great alternative to the factory brake pads. Driving Styles: Standard city and freeway braking – Frequent stop and go conditions.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct Fit application.
- Superior friction qualities.
- Ceramic materials
- Shimmed where recommended by engineering
- Application specific formulations
- Provides exceptionally long pad and rotor life, and resistance to heat
- Low noise, minimal brake dust
TRW – Automotive OE Replacement Brake Pads (Part No.N101037347TRW)
from
$68.47
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.
Product Features:
See More
Product Features:
- Include the OE specified shims.
- Low noise and reduced vibrations.
- Formulated to OE Specifications.
- Superior friction qualities.
- Organic blended compound.
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD586)
from
$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Singler layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD407)
from
$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Singler layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Most Popular 1988 Jaguar XJ6 Brake Kits
Customize your Jaguar with 2 Brake Kits products
like Brake Hardware Kits, all
priced under $7.05.
Carquest Wearever – Disc Brake Hardware Kit (Part No.13119)
from
$4.29
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Exact fitment and original replacement
- New Brake Hardware prevents premature wear and maximizes performance
- Helps deliver a quieter, more efficient braking system
- Manufactured with quality materials to suppress high stress levels
Autopart International Inc – Brake Hardware Kit (Part No.N10611996255API)
from
$7.05
Brake Hardware Kit
Top-Rated Brake Parts Brands For Your 1988 Jaguar XJ6
Shop for the best-rated brands offering Brake Parts and other products for your 1988 Jaguar XJ6s. Below you’ll find some of our best rated Brake Parts from PBR, and more. Brake Parts from these brands that fit a 1988 XJ6 start at just $136.75 and are rated as high as 5 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular PBR 1988 Jaguar XJ6 Brake Parts
When it comes to maintaining or upgrading your 1988 Jaguar XJ6, using quality Brake Parts is essential to ensure durability and a perfect fit. PBR ticks all of those boxes. We offer a wide selection of PBR Brake Parts, specifically designed for the 1988 Jaguar XJ6. With over 1 PBR brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $136.75. Plus, with over 7 customer reviews and an average rating of 5 stars, you can trust that our PBR Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$136.75
$136.75
(7)
“Perfect fit. Car seems more responsive, considering it is a turbo with a small intake and the stock filter looks restrictive. One advantage is this ca”
FAQs for 1988 Jaguar XJ6 Brake Parts
Which Brake Parts are best-sellers for 1988 Jaguar XJ6s?
Out of 6 Brake Parts that fit 1988 Jaguar XJ6s, the following parts are the top sellers:
- Disc Brake Hardware Kit (10168315) – $4.29
- Automotive OE Replacement Brake Pads (10772483) – $68.47
- Brake Hardware Kit (12605793) – $7.05
What’s the price range for 1988 Jaguar XJ6 Brake Parts?
Brake Part prices for the 1988 Jaguar XJ6 start at $4.29 and go up to $136.75 for the most premium parts.
What’s the average price of a Brake Part for a 1988 Jaguar XJ6?
The average price for Brake Parts for the 1988 Jaguar XJ6 is $41.09. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Brake Parts for other Jaguar XJ6 model years?
What are the cheapest Brake Parts for my 1988 Jaguar XJ6?
The cheapest 1988 Jaguar XJ6 Brake Parts we carry in stock are:
- Disc Brake Hardware Kit (10168315) – $4.29
- Brake Hardware Kit (12605793) – $7.05
- Brake Pads: Reliable and Dependable Stopping (3610764) – $15.00
- Brake Pads: Reliable and Dependable Stopping (5591406) – $15.00
- Automotive OE Replacement Brake Pads (10772483) – $68.47
What are the top-rated Brake Parts that fit the 1988 Jaguar XJ6?
Out of 14 reviews by customers, our 1988 Jaguar XJ6 Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1988 Jaguar XJ6 and their top-rated products:
- Brake Pads and Shoes
- Deluxe Ceramic Brake Pads (10846650) – $136.75
What types of Brake Parts do you sell for my 1988 Jaguar XJ6?
As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1988 Jaguar XJ6:
Can I get help with 1988 Jaguar XJ6 Brake Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jaguar Brake Parts and more.
What is your return policy for Jaguar XJ6 Brake Parts?
Advance Auto Parts keeps returns simple. For new Jaguar XJ6 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
