1988 Isuzu Pickup Engine Parts

Below you will find various in-demand Isuzu Engine Parts, components and accessories for your 1988 Pickup. Advance Auto Parts has popular Pickup parts like Camshafts, Engine Mounts, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other Pickup model years including 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995 and more. Select a category of 1988 Isuzu Pickup Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1988 Isuzu Pickup Engine Parts Categories

Oil Pumps

OE Engine Oil Coolers

Harmonic Balancers

Engine Mounts

Cylinder Head Temperature Sensors

Computer Control Relays

Timing Belts

Oil Caps

Camshaft Position Sensor Connectors

Timing Cover Seals

Camshaft Seals

Camshaft Position Solenoid Connectors

Engine Oil Pump Primers

Engine Assembly Lube

Camshaft Lubes

Engine Oil Pump Sleeve

Essential Engine Parts for 1988 Isuzu Pickups

from

$146.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$26.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$10.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$83.99

Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

from

$355.99

Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.

from

$28.99

Anchor 8576 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-1995
Weight approx: 3 Lbs
Part Group: 8576, 8579

from

$34.99

Anchor 9140 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1991-1994
Weight approx: 3 Lbs
Part Group: 9140, 9141

from

$33.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$122.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool« engine oil cooler kit
Imperial Econo-Kool® engine oil cooler kit
Lightweight construction with high-efficiency turbulators
Light-duty applications
All except Chevrolet V8 applications
Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.

from

$191.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling
Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling

from

$41.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$10.49

Sealed Power parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Formulated for pre-lubrication cam lobes, lifters & engine bearings
Increases load carrying capacity
Holds fast to surfaces
Exacting tolerances
Meets or exceeds OEM specifications
4.0 oz. Squeeze Container

from

$113.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$31.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$6.99

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$12.99

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$22.99

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This specific belt is for applications with standard temperature and load requirements with a square tooth profile

from

$37.99

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth w/ flat tip profile; designed to fit the timing sprockets precisely

from

$14.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Each gasket is built to meet or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$9.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$4.49

Product Features:

Brand may vary by location

from

$17.99

Product Features:

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$5.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$34.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$14.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Upgrade your 1988 Isuzu Pickup with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1988 Isuzu Pickup, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Isuzu or enhancing its overall performance, Engine Parts are key to keeping your Pickup functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Engine Parts for the 1988 Isuzu Pickup, designed to meet your needs without breaking the bank. From Camshaft replacements to Engine Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1988 Isuzu Pickup at great prices. Our Engine Parts inventory for this model ranges from just $6.99 to $355.99, with an average price of $80.52. Our 20 Engine Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 1988 Isuzu Pickup without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1988 Isuzu Pickup, we stock popular OEM and aftermarket Engine Parts from top names like Carquest Premium, National, Imperial, and more. Carquest Premium Engine Parts start at just $12.99 and boast an impressive 4.4 stars average rating from customers. National and Imperial also bring quality to the table, with Engine Parts available starting at $41.99, and at an average 4.3 stars rating. With 52 customer reviews and counting, our 1988 Isuzu Pickup Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1988 Isuzu Pickup is always ready to roll. We’re committed to providing you with everything you need to keep your Pickup in top shape, all in one place. Start shopping confidently below for your 1988 Isuzu Pickup!

Best-Selling Camshafts for 1988 Isuzu Pickups

Enhance the driving experience in your Isuzu with 4 quality Camshaft components, starting at $6.99.

show more show less

from

$14.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$26.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$14.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

Most Popular 1988 Isuzu Pickup Engine Mounts

Customize your Isuzu with 2 Engine Mounts products like Engine Mounts, all priced under $42.99.

show more show less

from

$42.99

Anchor 8579 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-1995
Weight approx: 3 Lbs
Part Group: 8576, 8579

from

$28.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-1995
Weight approx: 3 Lbs
Part Group: 8576, 8579

Top Picks for 1988 Isuzu Pickup Valve Cover and Cylinder Heads

Upgrade Isuzu Pickups with top-quality Valve Cover and Cylinder Heads parts, including 1 OEM and aftermarket selections for your 1988 model.

show more show less

from

$31.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

In-Demand Engine Timing Parts for 1988 Isuzu Pickups

Select from 2 premium Engine Timing Parts parts for your 1988 Isuzu Pickup, with prices ranging from $12.29 to $37.99.

show more show less

from

$37.99

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth w/ flat tip profile; designed to fit the timing sprockets precisely

from

$12.29

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Most Sold 1988 Isuzu Pickup Oil Pumps

Explore our best-selling Isuzu parts for the 1988 Pickup among 3 OEM and aftermarket options starting from $41.99.

show more show less

from

$41.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$355.99

from

$98.99

Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

Top-Rated Engine Parts Brands For Your 1988 Isuzu Pickup

Shop for the best-rated brands offering Engine Parts and other products for your 1988 Isuzu Pickups. Below you’ll find some of our best rated Engine Parts from Carquest Premium, National, and Imperial, and more. Engine Parts from these brands that fit a 1988 Pickup start at just $12.99 and are rated as high as 4.4 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 1988 Isuzu Pickup Engine Parts

When it comes to maintaining or upgrading your 1988 Isuzu Pickup, using quality Engine Parts is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Engine Parts, specifically designed for the 1988 Isuzu Pickup. With over 1 Carquest Premium brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99. Plus, with over 2 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $12.99

(2)

Oil Filler Cap

“It’s “just an oil cap” but you can’t drive a car without one. I called, the men at the store looked it up, my neighbor picked it up for me, and I was”

Popular National 1988 Isuzu Pickup Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 1988 Isuzu Pickup owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1988 Pickup, Advance Auto Parts carries a full inventory of 1 National Engine Parts. Plus you will be keeping your Isuzu in peak condition while saving money because prices on these National Engine Parts range up to $41.99, plus, with more than 2 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $41.99

(2)

Shaft Repair Sleeve

“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”

FAQs for 1988 Isuzu Pickup Engine Parts

Which Engine Parts are best-sellers for 1988 Isuzu Pickups?

Out of 20 Engine Parts that fit 1988 Isuzu Pickups, the following parts are the top sellers:

Coolant Temperature Sensor 1TS1222 (12422791) – $31.99
Multi-Use Connector (12447300) – $26.99
Oil Filler Cap (10049237) – $12.99

What’s the price range for 1988 Isuzu Pickup Engine Parts?

Engine Part prices for the 1988 Isuzu Pickup start at $6.99 and go up to $355.99 for the most premium parts.

What’s the average price of a Engine Part for a 1988 Isuzu Pickup?

The average price for Engine Parts for the 1988 Isuzu Pickup is $80.52. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Isuzu Pickup model years?

Yes, we currently carry Engine Parts for 13 model years of Isuzu Pickups between 1981 and 1995. Engine Parts are bought most frequently for the following model years: 1995, 1994, 1993, 1992, 1991, 1990, 1989, 1987, and 1986.

What are the cheapest Engine Parts for my 1988 Isuzu Pickup?

The cheapest 1988 Isuzu Pickup Engine Parts we carry in stock are:

Stock Replacement Engine Assembly Lubricant, 4 oz. (50175373) – $6.99
Engine Assembly Lubricant (20686470) – $10.49
Engine Crankshaft Seal (3267423) – $12.29
Oil Filler Cap (10049237) – $12.99
Multi-Purpose Seal (15440036) – $14.99

What are the top-rated Engine Parts that fit the 1988 Isuzu Pickup?

Out of 52 reviews by customers, our 1988 Isuzu Pickup Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1988 Isuzu Pickup and their top-rated products:

Engine Blocks
- Oil Filler Cap (10049237) – $12.99
Camshafts
- Oil Filler Cap (10049237) – $12.99

What types of Engine Parts do you sell for my 1988 Isuzu Pickup?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1988 Isuzu Pickup:

Can I get help with 1988 Isuzu Pickup Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Isuzu Engine Parts and more.

What is your return policy for Isuzu Pickup Engine Parts?

Advance Auto Parts keeps returns simple. For new Isuzu Pickup Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1988 Isuzu Pickup Engine Parts

PowerBond – Premium OEM Replacement Harmonic Balancer; 154mm Diameter (Part No.PB1400N)

Carquest Premium – Multi-Use Connector (Part No.PTA1104)

National – Engine Crankshaft Seal (Part No.225020)

Melling – Stock Replacement OE Type Oil Pump (Part No.M134)

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Anchor – Engine Mount: Front Left, 1 Piece (Part No.8576)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.9140)

Carquest Premium – Multi-Purpose Relay (Part No.RAA3065)

Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)

Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)

National – Shaft Repair Sleeve (Part No.99147)

Sealed Power – Engine Assembly Lubricant (Part No.55-400)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Carquest Premium – Coolant Temperature Sensor 1TS1222 (Part No.WTC1057)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

Carquest Premium – Engine Oil Filler Cap: Push Fit, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10072)

Carquest Premium – Oil Filler Cap (Part No.10101)

Dayco – Premium Timing Belt, 43.12 Inch With 115 Square Tooth (Part No.95122)

Dayco – Premium Timing Belt, 43.15 Inch With 137 Round Tooth, With Flat Tip (Part No.95147)

Carquest Premium – Multi-Use Connector (Part No.ABA3461)

Felpro – Engine Camshaft Housing Gasket (Part No.72696)

Schaeffler – Shaft Seal (Part No.SS2019)

Driveworks – Auto Transmission Extension Housing Seal (Rear Seal) (Part No.S-224205)

National – Multi Purpose Seal (Part No.1987)

National – Multi-Purpose Seal (Part No.224205)

National – Shaft Repair Sleeve (Part No.99166)

National – Multi-Purpose Seal (Part No.223830)

National – Multi-Purpose Seal (Part No.223830)

Carquest Premium – Multi-Use Connector (Part No.PTA1104)

Carquest Premium – Multi-Use Connector (Part No.ABA3461)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.8579)

Anchor – Engine Mount: Front Left, 1 Piece (Part No.8576)

Carquest Premium – Coolant Temperature Sensor 1TS1222 (Part No.WTC1057)

Dayco – Premium Timing Belt, 43.15 Inch With 137 Round Tooth, With Flat Tip (Part No.95147)

National – Engine Crankshaft Seal (Part No.224025)

National – Shaft Repair Sleeve (Part No.99147)

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Melling – Stock Replacement OE Type Oil Pump (Part No.M173)