1988 Honda Prelude Engine Parts
More 1988 Honda Prelude Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1988 Honda Prelude, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1988 Honda Prelude Engine Parts
Cardone – Engine Control Module (Part No.72-2064)
from
$337.99
CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Product Features:
See More
Product Features:
- Tested with automated computer equipment or bench-tested, depending on application, to ensure functionality.
- Re-soldering of critical components ensures superior electrical connections. This prevents intermittent failures and leads to longer product life.
- On-car vehicle validation is done to test durability and performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Mitsubishi – Mitsuboshi Timing Belt (Part No.A500091481MBL)
from
$58.52
The Mitsuboshi Timing Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.
Product Features:
See More
Product Features:
- High-tensile strength Carbon Cord
- Abrasion resistant
- High elasticity, high hardness HNBR rubber
- Increased durability
- Reduced noise
- Rubber construction for superior flexibility
- Special low friction tooth fabric
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.208-4304)
from
$199.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 14mm 12-Point, 5mm Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Honda H22A4, VTEC
- Sold As A Kit
Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)
from
$167.99
Product Features:
See More
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
Flex A Lite – Oil Cooler Sandwich Adapter Kit (Part No.3965)
from
$43.99
Oil Cooler Sandwich Adapter Kit
Sealed Power – Engine Connecting Rod Bearing Set (Part No.4-1825CP)
from
$45.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength
- Provides conformability required for older apps
- Our standard material is comparable to competitors performance bearing
- Note – This material offers less resistance to wear & corrosion than other materials.
- Utilizes ISO & QS certified manufacturing
Driveworks – Oil Seal (Part No.S-712008)
Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.30540)
from
$277.99
Remanufactured precision machined OE crankshafts.
Product Features:
See More
Product Features:
- Includes matching rod and main bearings.
- Journals Micropolished.
- All units subject to complete quality inspection.
Sealed Power – Engine Crankshaft Main Bearing Set (Part No.7102M)
from
$57.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength – provides conformability required for older applications
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1104)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Ishino – Oil Pan Gasket (Part No.A6130149911ISH)
from
$6.88
Ishino Japan is an original equipment manufacturer of sealing products, lubricants, and gaskets. A normal oil pan gasket is not used between the oil pan and engine on this application. The only gasket found is this rubber sealing strip between the rear main seal housing and the oil pan. Use the appropriate liquid gasket sealant on the sealing surfaces between the oil pan and the engine block.
See More
Nippon Reinz – Valve Cover Seal Washer (Part No.A803340499NRZ)
from
$2.28
Innovative product design and high quality materials allows us to provide Victor Reinz gaskets to meet specific engine requirements. The Dana global team of experienced engineers works with all engine types and configurations to offer the best sealing solution for specific applications.
Product Features:
See More
Product Features:
- Improved reliability, durability, and engine performance
- Embossment shapes designed to improve durability
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72632-1)
from
$38.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
National – Multi Purpose Seal (Part No.710331)
from
$11.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Ishino – Stone Cylinder Head Gasket (Part No.A810083993ISH)
from
$65.53
ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Corteco Ishino solution is to supply gaskets featuring a combination of different metals with different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.
Product Features:
See More
Product Features:
- Superb quality and precision manufacturing process to ensure overall sealing dependability
- Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
- Manufactured to exact OEM specifications
Nakamura – Nakamura Exhaust Valve (Part No.A405034583NKM)
from
$20.67
Nakamura manufactures intake and exhaust valves in forged and hot-extruded versions in a multitude of materials that meet or exceed OE specifications.
Product Features:
See More
Product Features:
- OE Quality
- Heat and corrosion resistant
- Chromium plated or nitrided
- Stem optimized to resist wear
Carquest Premium – Oil Filler Cap (Part No.10106)
from
$7.79
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Ishino – Oil Filler Cap Gasket (Part No.A6150177513ISH)
from
$1.89
Oil Filler Cap Gasket
Felpro – Engine Camshaft Seal (Part No.TCS 45620)
from
$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – CRANKSHAFT FRONT SEAL SET (Part No.TCS 45899)
from
$47.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
Felpro – Engine Crankshaft Seal Kit (Part No.BS 40430)
from
$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Original Equipment – Valve Cover Gasket (Part No.A803052141OEA)
from
$14.32
The Original Equipment valve cover gasket is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE Quality
- Improved reliability, durability, and engine performance
- Reduced oil consumption
- Embossment shapes designed to improve durability
Felpro – Engine Valve Cover Gasket Set (Part No.VS 50394 R)
from
$14.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Felpro – Engine Crankshaft Repair Sleeve (Part No.16275)
from
$9.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Engine$aver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Validated for fit, form, and function
Taiho – Taiho Thrust Bearing Set (Part No.A2130186237TAH)
from
$7.28
Taiho Micro grooved thrust bearings are highly innovative, high-performance engine bearings with fine grooves provided in the bearing inner wall. These bearings break the tradition of absolute flatness in bearings. MGB (Micro-Grooved Bearings) are engine bearings that have numerous shallow circumferential grooves covering their surface (Pitch: 0.1 to 1.0mm Groove depth: 1 to 10µm), much like a music record disk. Notwithstanding the conventional concept in that the surface should be smooth, the Microgrooves greatly contributes to engine noise and vibration reduction. MGB have various and superior performance characteristics and high potential, such as in vehicle comfort improvement, environmental control solutions including low fuel consumption and light-weight vehicle realization.
Product Features:
See More
Product Features:
- Silent performance improvement
- Fuel consumption reduction
- Starter size reduction
- Bearing width reduction
- Oil cooler elimination
Sealed Power – Engine Crankshaft Thrust Washer Set (Part No.1826AF)
from
$9.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed aluminum alloy
- Greater seizure resistance than tri-metal material
- Reduces dramatically or eliminates bearing wear
- Made with silicon to provide greater surface hardness
- Silicon particles help polish crankshaft journal to further reduce wear during operation
- Utilizes ISO & QS certified manufacturing
Popular 1988 Honda Prelude Engine Parts Categories
1988 Honda Prelude Engine Parts
You count on your 1988 Honda Prelude to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 49 Engine Parts ranging in price from $1.89 to $459.99, you’re sure to find everything you need for your 1988 Honda Prelude.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 19 different brands like Felpro, Carquest Premium, and National. 1988 Honda Prelude Engine Parts start as low as $1.89!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 148 extensive product reviews on 1988 Honda Prelude Engine Parts. Some of the top-rated Engine Parts products we carry are Shaft Repair Sleeve with 2.0 stars.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1988 Honda Prelude below to get started!
Top-Rated Engine Parts Brands For Your 1988 Honda Prelude
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Honda Prelude running right for years to come. In our inventory you’ll find brands like Felpro, Carquest Premium, National, and even more.
Popular Imperial Engine Parts
You’ll find popular Imperial brand products across Oil Cooler Parts. All are waiting to get your 1988 Honda Prelude back on the road. Some of the top-rated Imperial products in these categories are:
Top-Rated Engine Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Engine Parts for your 1988 Honda Prelude, and some of our most reviewed parts include:
from
$9.99
(26)
Engine Oil Filler Cap: 10081, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
Oil Caps
FAQs for 1988 Honda Prelude Engine Parts
What are the most purchased Engine Parts for the 1988 Honda Prelude?
Out of 49 Engine Parts for the 1988 Honda Prelude, the most popular in our inventory are:
What are the top-rated 1988 Honda Prelude Engine Parts?
Top-rated Engine Parts for your 1988 Honda Prelude based on customer reviews/ratings are:
