1988 Honda CRX Suspension Parts

Below you will find various in-demand Honda Suspension Parts, components and accessories for your 1988 CRX. Advance Auto Parts has popular CRX parts like Shocks and Struts, Trailing Arms, Air Suspension and Kits and more. You’ll also find aftermarket and OEM Suspension Parts for other CRX model years including 1985, 1986, 1987, 1989, 1990, 1991 and more. Select a category of 1988 Honda CRX Suspension Parts below and start saving instantly.

Popular 1988 Honda CRX Suspension Parts Categories

Suspension Self-Leveling Unit Fluids

Trailing Arm Mount Bushings

Lower Control Arms

Shock Mounts

Suspension Strut Mounting Kits

Shock Boots, Levelers, and Accessories

Suspension Complete Bushing Kits

Lower Control Arm Bushings

Strut Bellows

Shock Mounting Kits

Strut Mounts

Trailing Arm Bushings

Shock Absorber Bushings

Shock Mount Plates

Strut Mount Bushings

Strut Tower Braces

Essential Suspension Parts for 1988 Honda CRXes

from

$85.25

Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:

Unique polyurethane alternative
Sleeves in the bushings freely rotate which enhances longevity
Impregnated with graphite to aid in lubrication and reduce noise
Alternative to conventional rubber suspension bushings

from

$35.99

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$30.49

MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:

High polish chrome steel bearing races
Replacement helps restore vehicle handling
Superior rubber to steel bonding for durability

from

$64.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$36.49

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$32.82

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$29.99

Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.

Product Features:

Made from HYPER-Flex Polyurethane
Gives Shock Maximum Efficiency
Add to the Performance of Every Shock
Gives Instant Response/Control to Suspension

from

$29.99

Made from HYPER-Flex Polyurethane
Gives Shock Maximum Efficiency
Add to the Performance of Every Shock
Gives Instant Response/Control to Suspension

from

$54.99

Remove chassis flex for better handling. Made of the highest quality materials. Offered in different finishes to dress up the engine compartment.

from

$137.99

Single or Dual bar design with integrated steel brace virtually eliminates body flex for improved handling and drivability. Solid one piece design for maximum rigidity. Reduces chassis flex and improves torsion stiffness. Improves vehicle handling and drivability characteristics. Mounts directly to strut tower with little or no modifications required. Includes comprehensive instructions and all necessary hardware. Titanium grey powder coating delivers lasting good looks. Available for upper front and or rear.

Product Features:

CS-2 dual bar design
Mounts directly with no modifications required
Includes instructions and all necessary hardware
Titanium-look grey powder coat delivers lasting good looks
Stiffens chassis and improves vehicle handling
Maximum rigidity to increase vehicle handling

from

$21.99

This replacement shock mount is designed to directly replace the mount that comes stock on specified vehicle years, makes and models. It is precisely reverse-engineered to ensure original equipment quality, fit and durability.

Product Features:

Direct replacement – this shock mount is precision-engineered to match the fit and durability of the original shock mount on specific vehicles
Complete kit – all necessary mounting hardware is included with each mount
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Proactive repair – it’s often smart to replace shock mounts when replacing worn out shocks

from

$36.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$31.49

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$12.72

The Advanced Suspension Technology Control Arm Bushing is offers a unique polyurethane alternative to conventional rubber suspension bushings. Their bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise.AST is a manufacturer of high quality polyurethane replacement bushings and components for automotive applications.

Product Features:

Unique polyurethane alternative
Impregnated with graphite to aid in lubrication and reduce noise
Alternative to conventional rubber suspension bushings

from

$21.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$285.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$143.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$25.43

The ISG shock mount plate is OE Quality and is manufactured using only the highest quality materials and is designed to dampen noise and vibration.

Product Features:

OE-Equivalent and direct fit application
OE style mounts and fasteners
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$20.99

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$39.99

This suspension trailing arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$29.99

Long-lasting performance
Restores like-new steering and handling
Engineered to meet or exceed OE requirements
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

Upgrade your 1988 Honda CRX with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1988 Honda CRX, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Suspension Parts are key to keeping your CRX functioning at its best. At Advance Auto Parts, we offer a wide selection of 58 Suspension Parts for the 1988 Honda CRX, designed to meet your needs without breaking the bank. From Shocks and Strut replacements to Trailing Arms upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1988 Honda CRX at great prices. Our Suspension Parts inventory for this model ranges from just $5.14 to $285.99, with an average price of $50.12. Our 58 Suspension Parts in stock come from 22 trusted brands, so you’re sure to find the right part for your 1988 Honda CRX without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1988 Honda CRX, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline, Monroe, Moog, and more. Valvoline Suspension Parts start at just $36.49 and boast an impressive 5 stars average rating from customers. Monroe and Moog also bring quality to the table, with Suspension Parts available starting at $20.99, and at an average 4 stars rating. With 1,416 customer reviews and counting, our 1988 Honda CRX Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1988 Honda CRX is always ready to roll. We’re committed to providing you with everything you need to keep your CRX in top shape, all in one place. Start shopping confidently below for your 1988 Honda CRX!

Best-Selling Shocks and Struts for 1988 Honda CRXes

Enhance the driving experience in your Honda with 14 quality Shocks and Strut components, starting at $6.97.

show more show less

from

$20.99

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$36.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$35.99

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$29.99

Long-lasting performance
Restores like-new steering and handling
Engineered to meet or exceed OE requirements
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$32.82

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$29.99

Made from HYPER-Flex Polyurethane
Gives Shock Maximum Efficiency
Add to the Performance of Every Shock
Gives Instant Response/Control to Suspension

from

$20.82

The KYB shock bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$137.99

CS-2 dual bar design
Mounts directly with no modifications required
Includes instructions and all necessary hardware
Titanium-look grey powder coat delivers lasting good looks
Stiffens chassis and improves vehicle handling
Maximum rigidity to increase vehicle handling

from

$54.99

Remove chassis flex for better handling. Made of the highest quality materials. Offered in different finishes to dress up the engine compartment.

from

$31.36

Strut Mount

from

$28.96

Shock Mount

from

$21.99

Direct replacement – this shock mount is precision-engineered to match the fit and durability of the original shock mount on specific vehicles
Complete kit – all necessary mounting hardware is included with each mount
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Proactive repair – it’s often smart to replace shock mounts when replacing worn out shocks

from

$17.78

The Terada shock bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$6.97

Strut Mounting Kit

Most Popular 1988 Honda CRX Trailing Arms

Customize your Honda with 10 Trailing Arms products like Trailing Arm Bushings and Trailing Arm Mount Bushings, all priced under $99.81.

show more show less

from

$57.99

Easy to install
Restores like-new steering and handling
Engineered to meet or exceed OE requirements
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$39.99

This suspension trailing arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$43.99

Product Features:

Help Maintain Proper Rear Toe and Caster
During High Performance Driving Conditions
Important When Using Larger Wheels/Tires

from

$40.99

Product Features:

Help Maintain Proper Rear Toe and Caster
During High Performance Driving Conditions
Important When Using Larger Wheels/Tires

from

$85.25

Unique polyurethane alternative
Sleeves in the bushings freely rotate which enhances longevity
Impregnated with graphite to aid in lubrication and reduce noise
Alternative to conventional rubber suspension bushings

from

$62.20

Trailing Arm Bushing

from

$99.81

The Terada Trailing Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$77.46

Trailing Arm Bushing

from

$63.73

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Trailing Arm Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$52.99

Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your trailing arm centre pivot bushings have failed. Whiteline’s centre pivot bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Replace these worn parts with Whiteline bushings ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

Top Picks for 1988 Honda CRX Air Suspension and Kits

Upgrade Honda CRXes with top-quality Air Suspension and Kits parts, including 6 OEM and aftermarket selections for your 1988 model.

show more show less

from

$36.49

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$23.99

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$21.51

Strut Mounting Kit

from

$285.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$30.49

High polish chrome steel bearing races
Replacement helps restore vehicle handling
Superior rubber to steel bonding for durability

from

$25.43

The ISG shock mount plate is OE Quality and is manufactured using only the highest quality materials and is designed to dampen noise and vibration.

Product Features:

OE-Equivalent and direct fit application
OE style mounts and fasteners
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

In-Demand Control Arms for 1988 Honda CRXes

Select from 28 premium Control Arms parts for your 1988 Honda CRX, with prices ranging from $5.14 to $108.74.

show more show less

from

$43.99

Rigorously tested for sustained, secure performance by a team of product and quality engineers, our Control Arm is made for passenger safety, ensuring a smooth ride, stability, and agile handling.

Product Features:

Bushings included for a complete installation, saving time and labor (where applicable)
Direct replacement for a trouble-free installation
Steel, iron or aluminum construction ensures durability
Powder-coated or painted for long-lasting rust and corrosion resistance

from

$102.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Broad coverage for foreign and domestic applications

from

$25.17

The Terada Control Arm Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$64.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$108.74

Control Arm

from

$108.74

Control Arm

from

$100.83

The ISG control arm is designed and manufactured to exact OEM specifications providing original equipment quality, durability and performance. ISG control arms incorporate ball joints and include bushings that are either original equipment or provide OE-equivalent quality, fit and form.

Product Features:

Designed to fit right the first time, all geometry and pivot axis match OEM placement
Manufactured at TS16949 facilities (OEM grade)
All parts are designed and quality approved using PPAP (Production Part Approval Process)
Available in Forged Steel, Stamped Steel & Forged Aluminum (all meet or exceed OEM specifications)
Service kits are included where applicable, nuts, washers, cotter pins, & zerk fittings
European applications benefit from low friction ball sockets for precise steering feel

from

$86.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$69.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$69.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$66.99

Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

from

$52.99

Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.

Product Features:

Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

from

$51.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$47.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$41.76

The CTR control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$39.01

The Terada Control Arm Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$38.21

Control Arm

from

$32.99

This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$27.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Bushings are resistant to heat, wear, salt, road grime, and oils
Made from a high grade rubber compound
Quality construction for durability
Application specific for this vehicle

from

$22.99

Matches OE form, fit and function
Bushings are resistant to heat, wear, salt, road grime, and oils
Made from a high grade rubber compound
Quality construction for durability
Application specific for this vehicle

from

$22.95

Advanced Suspension Technology Control Arm Bushing offers a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:

Unique polyurethane alternative
Sleeves in the bushings freely rotate which enhances longevity
Impregnated with graphite to aid in lubrication and reduce noise
Alternative to conventional rubber suspension bushings

from

$22.89

The Terada Control Arm Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$21.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$21.32

The CTR Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$20.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$18.23

Control Arm Bushing

from

$12.72

Unique polyurethane alternative
Impregnated with graphite to aid in lubrication and reduce noise
Alternative to conventional rubber suspension bushings

from

$5.14

The FEQ Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

Top-Rated Suspension Parts Brands For Your 1988 Honda CRX

Shop for the best-rated brands offering Suspension Parts and other products for your 1988 Honda CRXes. Below you’ll find some of our best rated Suspension Parts from Valvoline, Monroe, and Moog, and more. Suspension Parts from these brands that fit a 1988 CRX start at just $20.99 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 1988 Honda CRX Suspension Parts

When it comes to maintaining or upgrading your 1988 Honda CRX, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 1988 Honda CRX. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$36.49

(446)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

“Good product”

Popular Monroe 1988 Honda CRX Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 1988 Honda CRX owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 1988 CRX, Advance Auto Parts carries a full inventory of 1 Monroe Suspension Parts. Plus you will be keeping your Honda in peak condition while saving money because prices on these Monroe Suspension Parts range up to $20.99, plus, with more than 12 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from
$20.99

(12)

Strut-Mate Strut Mounting Kit

“Great product”

FAQs for 1988 Honda CRX Suspension Parts

Which Suspension Parts are best-sellers for 1988 Honda CRXes?

Out of 58 Suspension Parts that fit 1988 Honda CRXes, the following parts are the top sellers:

Strut-Mate Strut Mounting Kit (15740016) – $20.99
Trailing Arm Bushing (20519777) – $57.99
Suspension Trailing Arm Bushing (20514675) – $39.99

What’s the price range for 1988 Honda CRX Suspension Parts?

Suspension Part prices for the 1988 Honda CRX start at $5.14 and go up to $285.99 for the most premium parts.

What’s the average price of a Suspension Part for a 1988 Honda CRX?

The average price for Suspension Parts for the 1988 Honda CRX is $50.12. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Honda CRX model years?

Yes, we currently carry Suspension Parts for 6 model years of Honda CRXes between 1985 and 1991. Suspension Parts are bought most frequently for the following model years: 1991, 1990, 1989, 1987, 1986, and 1985.

What are the cheapest Suspension Parts for my 1988 Honda CRX?

The cheapest 1988 Honda CRX Suspension Parts we carry in stock are:

Control Arm Bushing (11583927) – $5.14
Strut Mounting Kit (12601801) – $6.97
Control Arm Bushing, Heavy Duty (10755170) – $12.72
Terada Shock Bushing (10756315) – $17.78
Control Arm Bushing (12601583) – $18.23

What are the top-rated Suspension Parts that fit the 1988 Honda CRX?

Out of 1,416 reviews by customers, our 1988 Honda CRX Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1988 Honda CRX and their top-rated products:

Trailing Arms
- Trailing Arm Bushing (20519777) – $57.99
- Suspension Trailing Arm Bushing (20514675) – $39.99
Shocks and Struts
- Trailing Arm Bushing (20519777) – $57.99
- Suspension Trailing Arm Bushing (20514675) – $39.99

What types of Suspension Parts do you sell for my 1988 Honda CRX?

As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 1988 Honda CRX:

Can I get help with 1988 Honda CRX Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Suspension Parts and more.

What is your return policy for Honda CRX Suspension Parts?

Advance Auto Parts keeps returns simple. For new Honda CRX Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1988 Honda CRX Suspension Parts

AST – Polyurethane Trailing Arm Bushing (Part No.L2006578812AST)

KYB – Jounce Bumper and Bellows (Part No.SB108)

MOOG – Suspension Strut Mount Kit (Part No.K9492)

Dorman – Suspension Control Arm (Part No.520-678)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

KYB – STRUT MOUNT (Part No.L3030392404KYB)

Energy Suspension – Shock Bushing Set (Part No.16.8103G)

Energy Suspension – Shock Bushing Set (Part No.16.8103R)

Pilot – Rear Strut Power Bar (Part No.PM-402S)

DC Sports – Rear Carbon Steel Strut Bar – Fits 88-00 Civic/CRX/Del/94-01 Int. (Part No.CSB2310)

Dorman – Suspension Shock Absorber Mount (Part No.533-430)

MOOG – Strut Bellows (Part No.K90467)

KYB – Jounce Bumper and Bellows (Part No.SB103)

Advanced Suspension Technology – Control Arm Bushing, Heavy Duty (Part No.L2030290918AST)

Dorman – Suspension Control Arm Bushing (Part No.533-748)

Energy Suspension – Hyper-Flex System (Part No.16.18102G)

Energy Suspension – Hyper-Flex System (Part No.16.18101R)

International Suspension Group – Shock Mount Plate (Part No.L4015294423ISG)

Monroe – Strut-Mate Strut Mounting Kit (Part No.901940)

Dorman – Suspension Trailing Arm Bushing (Part No.905-750)

MOOG – Suspension Shock / Strut Mount Bushing (Part No.K9443)

Monroe – Strut-Mate Strut Mounting Kit (Part No.901940)

MOOG – Strut Bellows (Part No.K90467)

KYB – Jounce Bumper and Bellows (Part No.SB108)

MOOG – Suspension Shock / Strut Mount Bushing (Part No.K9443)

KYB – STRUT MOUNT (Part No.L3030392404KYB)

Energy Suspension – Shock Bushing Set (Part No.16.8102R)

KYB – KYB Shock Bushing (Part No.L404035005KYB)

DC Sports – Rear Carbon Steel Strut Bar – Fits 88-00 Civic/CRX/Del/94-01 Int. (Part No.CSB2310)

Pilot – Rear Strut Power Bar (Part No.PM-402S)

Sachs – Strut Mount (Part No.L30301563579SAC)

Autopart International Inc – Shock Mount (Part No.L40103157516API)

Dorman – Suspension Shock Absorber Mount (Part No.533-430)

Terada – Terada Shock Bushing (Part No.L4040143471TER)

Autopart International Inc – Strut Mounting Kit (Part No.L30331966878API)

MOOG – Trailing Arm Bushing (Part No.K80668)

Dorman – Suspension Trailing Arm Bushing (Part No.905-750)

Energy Suspension – Trailing Arm Bushing Set (Part No.16.7106R)

Energy Suspension – Trailing Arm Bushing Set (Part No.16.7106G)

AST – Polyurethane Trailing Arm Bushing (Part No.L2006578812AST)

Meyle – Trailing Arm Bushing (Part No.L2006143596MEY)

Terada – Trailing Arm Bushing (Part No.L2006143596TER)

Dorman – Trailing Arm Bushing (Part No.L2006830023DOR)

TRW – Trailing Arm Bushing (Part No.L2006143596TRW)

Whiteline – Trailing Arm Centre Pivot Bushings – Grease Free, Superior Performance (Part No.W63452G)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

KYB – Shock / Strut Mount Kit (Part No.SM5058)

KYB – Strut Mounting Kit (Part No.L303339284KYB)

Energy Suspension – Hyper-Flex System (Part No.16.18102G)

MOOG – Suspension Strut Mount Kit (Part No.K9492)

International Suspension Group – Shock Mount Plate (Part No.L4015294423ISG)

Driveworks – Control Arm Rear Upper Left (Part No.520-671)

MOOG – Control Arm (Part No.RK100068)

Terada – Control Arm Bushing (Part No.L2030147450TER)

Dorman – Suspension Control Arm (Part No.520-678)

Autopart International Inc – Control Arm (Part No.L2000651959API)

Autopart International Inc – Control Arm (Part No.L20002056003API)

International Suspension Group – Control Arm (Part No.L2000143432ISG)

Dorman – Suspension Control Arm (Part No.520-677)

Energy Suspension – Control Arm Bushing Set (Part No.16.3103G)

Energy Suspension – Control Arm Bushing Set (Part No.16.3103R)

Whiteline – Control Arm Lower Rear Inner And Outer Bushing (Part No.W62005)

Whiteline – Control Arm Lower Bushing (Part No.W52006)

Dorman – Suspension Control Arm (Part No.520-672)

Dorman – Suspension Control Arm (Part No.520-671)

CTR – Control Arm (Part No.L2000143444CTR)

Terada – Control Arm Bushing (Part No.L2030143472TER)

Autopart International Inc – Control Arm (Part No.L20003191987API)

Dorman – Suspension Control Arm Bushing Kit (Part No.533-610)

Beck/Arnley – Control Arm Bushing Set (Part No.101-6189)

Beck/Arnley – Control Arm Bushing Set (Part No.101-5940)

AST – Polyurethane Control Arm Bushing (Part No.L2030578824AST)

Terada – Control Arm Bushing (Part No.L2030143598TER)

Dorman – Suspension Control Arm Bushing (Part No.533-748)

CTR – Control Arm Bushing (Part No.L2030143472CTR)

Rare Parts – Control Arm Bushing (Part No.RP17182)

Autopart International Inc – Control Arm Bushing (Part No.L20302004789API)

Advanced Suspension Technology – Control Arm Bushing, Heavy Duty (Part No.L2030290918AST)

First Equipment Quality – Control Arm Bushing (Part No.L2030143598FEQ)