1988 GMC G1500 Drivetrains

Essential 1988 GMC G1500 Drivetrains

Yukon Gear – 10.5" GM 14 Bolt Truck Pinion Nut (Part No.33148)

10.5" GM 14 Bolt Truck Pinion Nut

from

$48.99
10.5″ GM 14 bolt truck pinion nut. 1 1/2″ socket, 15/16″ x 16 thread.

Product Features:
  • Pinion nut for GM 10.5″ 14 bolt truck
  • 15/16″ x 16 thread
  • 1.5″ socket
See More

Yukon Gear – Minor Install Kit For GM 12 Bolt Truck Differential (Part No.12044)

Minor Install Kit For GM 12 Bolt Truck Differential

from

$151.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (Includes Supershims).

Product Features:
  • Fits GM 12 bolt truck
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Yukon Gear – Pinion Install Kit For GM 12 Bolt Truck Differential (Part No.13057)

Pinion Install Kit For GM 12 Bolt Truck Differential

from

$232.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 12 bolt truck
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

National – Bearings (Part No.A-5)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – U/Joint Strap For GM 14T (Part No.41200)

U/Joint Strap For GM 14T

from

$9.99
Product Features:
  • U-joint strap
  • Fits GM 10.5″ 14 bolt truck
  • 1350 and 1410 u-joint size
  • One single strap
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Yukon Gear – Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck (Part No.33344)

Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck

from

$28.99
Positraction cross pin bolt for GM 12P and 12T.

Product Features:
  • Cross pin bolt for GM 12 bolt passenger car and truck
  • For OEM positraction applications only
See More

Yukon Gear – GM 12 Bolt Truck Cover Gasket (Part No.23015)

GM 12 Bolt Truck Cover Gasket

from

$12.99
12T cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 12 bolt truck
See More

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Adapter Sleeve Fro GM 11.5" & 10.5" 14 Bolt Truck Yokes To Use Triple Lip Pinion Seal (Part No.41209)

Adapter Sleeve Fro GM 11.5" & 10.5" 14 Bolt Truck Yokes To Use Triple Lip Pinion Seal

from

$29.99
Product Features:
  • Adapter sleeve
  • Fits GM 10.5″ 14 bolt truck and GM 11.5″
  • Converts to triple lip seal
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Timken – Differential Pinion (Part No.J7020434676TIM)

Differential Pinion

from

$49.68
Differential Pinion

Yukon Gear – Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles (Part No.26016)

Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles

from

$929.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:
  • Fits GM 8.5″ and 8.6″ with 30 spline axles
  • 2.73 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1018-B)

RngPnnInstlKt

from

$39.49
RngPnnInstlKt

Yukon Gear – Grizzly Locker For GM 10.5" 14 Bolt Truck With 30 Spline Axles (Part No.28015)

Grizzly Locker For GM 10.5" 14 Bolt Truck With 30 Spline Axles

from

$859.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • Installs into standard open carrier
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Spicer – Universal Joint (Part No.5-795X)

Universal Joint

from

$50.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Yukon Gear – Bearing Install Kit For GM 12 Bolt Truck Differential (Part No.11055)

Bearing Install Kit For GM 12 Bolt Truck Differential

from

$239.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits GM 12 bolt truck
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-531)

Differential Pinion Yoke Assembly

from

$315.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

USA Standard Gear – Spartan Locker For GM 8.5" With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17041)

Spartan Locker For GM 8.5" With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$649.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits GM 18.5″ with 30 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

Yukon Gear – Standard Open Spider Gear Kit For GM 12 Bolt Car And Truck With 30 Spline Axles (Part No.16043)

Standard Open Spider Gear Kit For GM 12 Bolt Car And Truck With 30 Spline Axles

from

$207.99
Yukon standard open spider gear kit for GM 12P and 12T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 12 bolt passenger car and truck open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For GM 12 Bolt Car And Truck (Part No.32236)

Chrome Moly Cross Pin Shaft For Mini-Spool For GM 12 Bolt Car And Truck

from

$61.99
Chrome Moly cross pin shaft for Mini-Spool for GM 12P and 12T HD.

Product Features:
  • Hardened cross pin shaft
  • Fits GM 12 bolt passenger car and truck
See More

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$373.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Composite clutches
See More

Yukon Gear – Bearing Race Driver (Part No.56017)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM89410 race
  • All steel construction
See More

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

Differential Yoke including Seal and Pinion Nut

from

$139.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – High Performance Ring & Pinion "Thick" Gear Set For GM 12 Bolt Truck In A 4.56 Ratio (Part No.24461)

High Performance Ring & Pinion "Thick" Gear Set For GM 12 Bolt Truck In A 4.56 Ratio

from

$384.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a thick gear set for a 3.42 & down carrier.

Product Features:
  • Fits GM 12 bolt truck
  • 8.875″ ring gear diameter
  • 30 spline pinion
  • 12 ring gear bolts
  • 4.56 ratio
  • Thick gear for 3.42 and down carrier
See More

Yukon Gear – High Performance Ring & Pinion "Thick" Gear Set For 10.5" GM 14 Bolt Truck In A 5.38 Ratio (Part No.24140)

High Performance Ring & Pinion "Thick" Gear Set For 10.5" GM 14 Bolt Truck In A 5.38 Ratio

from

$464.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a thick gear for a 4.10 & down carrier.

Product Features:
  • Fits GM 10.5″ GM 14 bolt truck
  • 10.50″ ring gear diameter
  • 30 spline pinion
  • 12 ring gear bolts
  • 5.38 ratio
  • Thick gear set for 4.11 and down carrier
See More

Popular 1988 GMC G1500 Drivetrains Categories

1988 GMC G1500 Drivetrains

You count on your 1988 GMC G1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 254 Drivetrains ranging in price from $1.99 to $1,153.99, you’re sure to find everything you need for your 1988 GMC G1500.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 20 different brands like Valvoline, Moog, and National. 1988 GMC G1500 Drivetrains start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,710 extensive product reviews on 1988 GMC G1500 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.2 stars and Bearings with 4.2 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1988 GMC G1500 below to get started!

Top-Rated Drivetrains Brands For Your 1988 GMC G1500

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 GMC G1500 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, National, and even more.

Popular Powertrax Drivetrains

You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 1988 GMC G1500 back on the road. Some of the top-rated Powertrax products in these categories are:
Grip LS Traction System
from $503.99
(1)
Grip LS Traction System
Differential Open Unit and Components

FAQs for 1988 GMC G1500 Drivetrains

What are the most purchased Drivetrains for the 1988 GMC G1500?

Out of 254 Drivetrains for the 1988 GMC G1500, the most popular in our inventory are:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Housing Cover Gaskets
Greaseable Premium Universal Joint
from $26.99
(89)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $15.99
(52)
Universal Joint
U-Joints

What are the top-rated 1988 GMC G1500 Drivetrains?

Top-rated Drivetrains for your 1988 GMC G1500 based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
Bearings
from $16.99
(39)
Bearings
“Perfect fit. Make sure you get your bearings completely filled with grease when reassembling your hubs.”
Universal Joint Strap Kit
from $11.99
(35)
Universal Joint Strap Kit
“Fit on my 99 gmc sierra 1500 z71 perfect”