1988 Chevrolet Monte Carlo Vehicle Hoods
More 1988 Chevrolet Monte Carlo Vehicle Hoods
Find your specific 1988 Chevrolet Monte Carlo original or aftermarket Vehicle Hoods below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1988 Chevrolet Monte Carlo Vehicle Hoods
ACDelco – Professional Trunk Lift Support (Part No.O2064597581ACD)
from
$46.68
ACDelco Professional Lift Supports are the ideal replacements for your worn out lift support struts. The pressurized, gas charged cylinders feature chromed rods and superior seals for a lasting, quality lift support replacement. Each lift support is custom engineered and manufactured to top industry standards with self-cleaning piston technology and a patented multi-lobe sealing system. ACDelco Professional Lift Supports are easy to install with simple hand tools in just minutes.
Product Features:
See More
Product Features:
- High quality seals keep lift support fluids and gases contained within the strut components, resulting in extended product life
- Chromed rod increases rust and corrosion resistance for a higher quality, longer lasting, lift support
- Rubber O-ring piston seal for controlled lift
- Heavy gauge steel pressure tube provides long life
- Polytetrafluroethylene (PTFE) backup ring gives enhanced performance
StrongArm – Hood Lift Support: 20.47" Ext Length, 5.39" Travel, 89 Lbs of Force, 1 Pk (Part No.D4640)
from
$30.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Trunk Lift Support: 12.56" Ext Length, 4.37" Travel, 115 Lbs of Force, 1 Pk (Part No.E4553)
from
$21.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Hood Lift Support: 21.79" Ext Length, 6.4" Travel, 207 Lbs of Force, 1 Pk (Part No.C6315)
from
$28.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
International Suspension Group – Hood Strut (Part No.O20201229519ISG)
from
$31.75
Hood Strut
Stabilus – Gas Charged Trunk Strut (Part No.O2064324257STB)
from
$53.27
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.
Product Features:
See More
Product Features:
- Restores the original opening and closing speeds of your hood, hatch or trunk
- Easy-to-install
- No special tools required
- Engineered for your application
- Easy lifting and reduced closing effort
- Consistent lifting force through 50,000 cycles
- Rust-resistant piston rod extends product life
- Dynamic damping technology, available on select lift supports
StrongArm – Trunk Lift Support: 11.06" Ext Length, 3.12" Travel, 147 Lbs of Force, 1 Pk (Part No.E4120)
from
$23.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
KAI – Cowl Seal (Part No.GMK403528078)
from
$30.99
New Goodmark Hood To Cowl Seal
Product Features:
See More
Product Features:
- Hood To Cowl Seal
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Cowl Seal (Part No.CS 5)
from
$21.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood to Cowl Seal, with clips. 59-1/8 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Cowl Seal (Part No.CS 13-G)
from
$41.49
Cowl Seal
KAI – Hood Insulation Clip (Part No.GMKHWB2401)
from
$10.99
New Goodmark Box Of 25 Hood Pad Clips, Replaces Gm 3977775, 2 Inch Diameter
Product Features:
See More
Product Features:
- 2 Inch Diameter
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GMK406221081RS)
from
$125.99
New Goodmark Passenger Side Hood Hinge With Spring
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GM1236150)
from
$49.99
New Standard Replacement Driver Side Upper Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GMK406221081LS)
from
$125.99
New Goodmark Driver Side Hood Hinge With Spring
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GMK403321070L)
from
$79.99
New Goodmark Driver Side Hood Hinge Assembly
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge Spring (Part No.GMK401021164)
from
$15.99
New Goodmark Driver Or Passenger Side Hood Hinge Spring
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GMK403321070R)
from
$77.99
New Goodmark Passenger Side Hood Hinge Assembly
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge (Part No.GM1236151)
from
$49.99
New Standard Replacement Passenger Side Upper Hood Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Hood Hinge Spring (Part No.GMK401121166)
from
$17.99
New Goodmark Driver Or Passenger Side Hood Hinge Spring, For All Except Super Sport Models
Product Features:
See More
Product Features:
- For All Except Super Sport Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 1988 Chevrolet Monte Carlo Vehicle Hoods Categories
1988 Chevrolet Monte Carlo Vehicle Hoods
Maybe you’re in the middle of a full rebuild of that 1988 Chevrolet Monte Carlo. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 6 different Vehicle Hoods in our inventory ranging from $10.99 to $125.99. That means you can find the exact parts or products you need to keep that 1988 Chevrolet Monte Carlo running smoothly.
Vehicle Hoods are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Chevrolet Monte Carlo. Atlas Lift, KAI, and Metro Mould are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Vehicle Hoods for your 1988 Chevrolet Monte Carlo, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Vehicle Hoods to keep your 1988 Chevrolet Monte Carlo rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Vehicle Hoods Brands To Make Your 1988 Chevrolet Monte Carlo Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Chevrolet Monte Carlo demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Monte Carlo the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.
FAQs for 1988 Chevrolet Monte Carlo Vehicle Hoods
What are the most purchased Vehicle Hoods for the 1988 Chevrolet Monte Carlo?
Out of 6 Vehicle Hoods for the 1988 Chevrolet Monte Carlo, the most popular in our inventory are:
